Kurnool is often called the gateway to Rayalaseema. Standing on the banks of the Tungabhadra and connected to both Hyderabad and Bengaluru, it is a major centre for trade, healthcare, education and agriculture. In areas like Budhwarpet, Balaji Nagar, Santosh Nagar and Gayatri Estate, old homes are being renovated and new floors are being built. Hospitals, oil mills, cotton and groundnut units, shops and warehouses are expanding too.
Almost every such project reaches a point where a section of the concrete roof has to be opened. A skilled roof cutting service in Kurnool does this with precision, so your staircase, lift, skylight or service opening is exactly where you want it.
At Core Cutting India, we use diamond cutting technology to protect your building and finish the job cleanly.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected]
What Is Roof Cutting? A Clear, Quick Answer
Roof cutting is the process of removing a planned section of an RCC roof or slab using diamond saws, wire saws or core machines. It is used for staircases, lift shafts, skylights, ducts, pipe holes and partial demolition. It is cleaner, quieter and safer than manual breaking.
Situations Where Kurnool Customers Call Us
Here are common examples of why people contact a roof cutting service:
A family wants a terrace room. Their house in Balaji Nagar has no staircase to the roof. They need a neat opening for new stairs.
A hospital wants a lift. An older building needs a lift installed without shutting down the whole facility.
An oil mill is upgrading. The owner needs openings in the slab for new machinery and exhaust pipes.
A shop owner wants more light. A dark showroom needs a skylight to look more inviting.
A builder needs duct and pipe holes. A new apartment needs clean openings for plumbing and cables.
These are typical examples, not specific customers. If your situation looks similar, we can help.
Our Roof Cutting Services in Kurnool
Staircase Openings
Straight and neat cuts that fit your design and give proper head-room.
Lift Shaft and Elevator Slab Cutting
Accurate floor-by-floor cutting for homes, hospitals, hostels and apartments.
Skylights and Light Wells
We cut openings for natural light and ventilation.
Pipe, Duct and Cable Openings
Rectangular and round holes for water lines, drains, AC ducts and electrical routes.
Mill and Godown Openings
For cotton, groundnut and other agro units, we cut openings for machines, chimneys, exhausts and material handling.
Hospital and Clinic Cutting
Quiet and low-dust work that suits sensitive healthcare spaces.
Partial Slab Removal
Remove the damaged or unwanted part in controlled blocks without disturbing the rest of the roof.
Wall Saw Cutting and Core Drilling
Doors, windows and round holes in concrete. See our nearby Atmakur core cutting service for another location in the Rayalaseema belt.
Roof Cutting Cost in Kurnool
Rate Guide
| Work Type |
Approximate Rate |
| Standard RCC roof (4–6 inch) |
₹120 – ₹230 per running foot |
| Thick or heavily reinforced slab (6–10 inch) |
₹210 – ₹360 per running foot |
| Core holes |
Based on diameter and depth |
| Small job minimum charge |
₹3,000 – ₹8,000 |
| Bulk or multi-floor projects |
Special quote |
These figures are only for guidance. The final price depends on your site.
Cost Planning Table
| If Your Project Is |
Expect the Price to Depend On |
| A house staircase |
Slab thickness and opening size |
| A hospital lift shaft |
Number of floors and working hours |
| A mill or godown opening |
Steel density, height and length |
| Several pipe holes |
Number and diameter of holes |
| A skylight |
Roof access and cutting length |
Ways to Reduce Your Final Bill
- Give correct measurements in advance.
- Mark the cutting area clearly.
- Keep power and water ready.
- Combine multiple cuts into one visit.
- Decide about debris removal beforehand.
Instant Estimate
Use the Rate Calculator or send your measurements and photos by WhatsApp to 7009679903.
Our Step-by-Step Process
Step 1 – Contact. Call, WhatsApp or email with your Kurnool location and requirement.
Step 2 – Review. We check slab thickness, steel, beams and access.
Step 3 – Quote. You get a clear estimate with scope and timeline.
Step 4 – Marking. We mark the cutting lines and confirm them with you.
Step 5 – Safety setup. Supports, barricades and protection for floors below.
Step 6 – Cutting. Diamond tools cut through concrete and steel with water cooling.
Step 7 – Removal. Cut blocks are lifted or lowered safely.
Step 8 – Handover. We check the finish and clean up as agreed.
Technology We Use
| Equipment |
Use |
| Slab saw |
Long straight cuts in roofs and floors |
| Wall saw |
Deep cuts in thick walls and slabs |
| Wire saw |
Heavy or hard-to-reach concrete |
| Ring saw |
Corners and tight places |
| Core drill |
Round holes for pipes and cables |
Because diamond tools grind rather than hammer, vibration stays low and edges stay clean. This is a big advantage for occupied buildings and older structures.
Safety Standards We Follow
- Slab and structure check before work
- Support under the portion to be removed
- Barricades around the work area
- Helmets, gloves, goggles and ear protection
- Safe and earthed electrical setup
- Controlled water and slurry flow
- Coordination with your engineer or contractor
- Respect for neighbours and building rules
Important: If the opening is near a main beam, column or load-bearing wall, please get approval from a structural engineer first.
After the Cut: What to Do Next
Cutting is only one step in your project. Here is what usually follows:
- Check the edges. Make sure the opening matches your drawing.
- Treat exposed steel. Cut steel bars should be treated or covered as advised by your engineer.
- Waterproof around the opening. This is especially important for terraces and skylights.
- Build the frame or staircase. Your mason or contractor can start the next stage.
- Finish and paint. Plaster and paint edges for a neat final look.
We are happy to guide you on what to expect after cutting, so there are no surprises.
Do I Need Permission Before Cutting My Roof?
A quick guide:
| Situation |
Suggested Action |
| Small opening in your own house, away from beams |
Usually fine, but discuss with your mason or engineer |
| Opening near a beam, column or wall |
Take a structural engineer's approval |
| Apartment or society building |
Get consent from the owner, society or management |
| Commercial or multi-storey building |
Check with the engineer and local authority as needed |
Rules differ by building and area, so always confirm locally.
Benefits of Professional Roof Cutting
- Accuracy: The opening matches the plan.
- Protection: Less vibration, fewer cracks.
- Speed: Faster than manual breaking.
- Comfort: Lower noise and dust.
- Savings: Less plastering and repair work.
- Transparency: Costs are clear from the start.
- Peace of mind: Trained operators, proper tools.
Who We Serve in Kurnool
- Homeowners adding stairs and extra floors
- Hospitals and clinics
- Apartment builders and contractors
- Oil mill, cotton and groundnut unit owners
- Warehouse and godown operators
- Schools, colleges and hostels
- Shop and showroom owners
- Architects and interior designers
- Government and private project teams
Areas We Cover Around Kurnool
- Kurnool city – Budhwarpet, Balaji Nagar, Santosh Nagar, Gayatri Estate, Bellary Chowrasta, Kallur and nearby colonies
- Orvakal
- Nandikotkur
- Nandyal
- Dhone
- Adoni
- Yemmiganur
- Allagadda
- Banaganapalle
- Pattikonda
- Gooty
- Anantapur
- Mahabubnagar side (on request)
Other Cities We Serve
We also provide services in many other cities across Andhra Pradesh and India. These pages may help:
If your town is not listed, call 7009679903 and we will confirm availability.
Why Choose Core Cutting India?
- We focus on concrete cutting and drilling.
- We use modern diamond machines.
- We give open and fair pricing.
- We work cleanly and carefully.
- We reply quickly on call, WhatsApp and email.
- We have experience in many cities.
Explore all our services at corecuttingindia.com.
Frequently Asked Questions: Roof Cutting Service in Kurnool
1. How much does roof cutting cost in Kurnool?
Roof cutting in Kurnool usually costs ₹120 to ₹360 per running foot, depending on slab thickness and steel. Small jobs often have a minimum charge. For an exact quote, use our rate calculator or call 7009679903.
2. Is roof cutting safe for my building?
Yes. Diamond cutting removes only the marked area with very little vibration. For cuts near beams or columns, get a structural engineer's advice first.
3. How long does a roof cutting job take?
A normal staircase opening takes a few hours to one day. Thicker slabs, dense steel or hard access can add time.
4. Do you provide roof cutting near Nandyal, Adoni or Yemmiganur?
Yes. We serve Kurnool and nearby towns including Nandyal, Adoni, Yemmiganur, Dhone, Allagadda, Banaganapalle and Orvakal. Call or WhatsApp 7009679903 to confirm.
5. What happens to the exposed steel after cutting?
Exposed steel should be treated or covered as per your engineer's advice, to prevent rust. We can guide you on the next steps after the cut.
6. Is diamond cutting better than breaking the roof manually?
Yes. It is more accurate, quieter and cleaner, and it protects the remaining structure. Manual breaking can cause cracks and extra repair costs.
7. Can you cut round holes in a slab?
Yes. We use core drilling machines for round holes and slab saws for rectangular openings, for pipes, ducts and cables.
8. How can I book a roof cutting service in Kurnool?
Call or WhatsApp 7009679903, or email [email protected] with your location, opening size and photos. We will send a quote and the earliest available date.
Conclusion: Choose a Dependable Roof Cutting Service in Kurnool
When your project needs a clean opening in a concrete roof, the right method protects your building, your budget and your schedule. A skilled roof cutting service in Kurnool gives you accuracy, safety and a neat finish, whether it is for a home staircase, a hospital lift or a mill upgrade.
Core Cutting India brings diamond technology, careful planning and honest pricing to every job across Kurnool and nearby towns. Share your plan with us, and we will cut it right.
📞 Call / WhatsApp now: 7009679903 📧 Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator
