Calculate RCC core cutting rates, AC hole cutting charges, wall & slab cutting costs in seconds. Connect with verified contractors anywhere in India — for free.
Current market rates for RCC core cutting, AC hole cutting, wall cutting & slab cutting across India. All rates are per inch of depth.
Core Size (Diameter)
Rate per Inch
6" Depth (Cost)
9" Depth (Cost)
12" Depth (Cost)
Common Use
2 inch (50mm)
₹80/inch
₹480
₹720
₹960
Pipe drilling, small conduit
3 inch (75mm)
₹120/inch
₹720
₹1,080
₹1,440
Plumbing pipes, conduit
4 inch (100mm) AC HOLE
₹150/inch
₹900
₹1,350
₹1,800
AC pipe, split AC installation
5 inch (125mm)
₹220/inch
₹1,320
₹1,980
₹2,640
Exhaust fan, large conduit
6 inch (150mm)
₹300/inch
₹1,800
₹2,700
₹3,600
Duct work, large pipes
Service Type
Unit
Min Rate
Max Rate
Avg Rate
Notes
RCC Wall Cutting
Per RFT
₹100
₹180
₹140
Diamond blade, up to 6" thick
Brick Wall Cutting
Per RFT
₹60
₹100
₹80
Standard brick masonry
RCC Slab Cutting
Per RFT
₹120
₹200
₹160
Floor/roof slab, up to 6" thick
Beam Cutting
Per RFT
₹150
₹250
₹200
Heavy RCC beams, extra charges apply
Floor Chasing (Groove)
Per RFT
₹40
₹80
₹60
For conduit & pipe laying
Minimum Visit Charge
Per Visit
₹1,500
₹3,000
₹2,000
Applies regardless of work volume
Wall / Slab Type
Thickness
AC Hole Rate (4")
Per Additional Inch
Typical Total
Brick Wall (9 inch)
9"
₹1,350
₹150
₹1,350–₹1,500
RCC Wall (6 inch)
6"
₹900
₹150
₹900–₹1,100
RCC Wall (9 inch)
9"
₹1,350
₹150
₹1,350–₹1,600
Double Brick Wall (18 inch)
18"
₹2,700
₹150
₹2,700–₹3,000
Minimum Charge (any wall)
—
₹1,500 – ₹2,000 per contractor visit
Rates are indicative 2026 market averages. Final rates depend on city, contractor, site conditions, and urgency. Use the calculator above and submit an enquiry for exact quotes.
How to Calculate Core Cutting Rate
Core cutting rate calculation is straightforward once you know the three key variables: hole diameter (size), cutting depth (wall/slab thickness), and number of holes.
Total Cost = Rate per inch × Depth in inches × Number of holes
Example — AC hole cutting rate calculation: You need 2 AC holes (4-inch diameter) through a 9-inch RCC wall.
Rate for 4-inch core = ₹150 per inch
Depth = 9 inches (wall thickness)
Number of holes = 2
Total = ₹150 × 9 × 2 = ₹2,700
Use the calculator above to instantly compute your project cost for any core size, depth, and quantity.
What Affects the Core Cutting Rate?
Several factors influence the final core cutting charges beyond the base rate:
Core diameter: Larger diameter cores require heavier equipment and diamond bits — rates increase significantly from 2" to 6".
Wall/slab material: Plain concrete is easier to cut than heavily reinforced RCC. Extra steel reinforcement may attract a surcharge.
Depth of cutting: Rate is charged per inch of depth. Thicker walls cost proportionally more.
Site accessibility: Work at height, in basement, or in confined spaces may attract extra mobilisation charges.
City and contractor: Rates in metro cities (Delhi, Mumbai, Bengaluru) are typically 10–15% higher than Tier-2 cities.
Minimum visit charge: Most contractors charge ₹1,500–₹3,000 as a minimum — always club multiple holes in one visit.
AC Hole Cutting Rate — Everything You Need to Know
The AC hole cutting rate is one of the most searched queries in India because split AC installation requires drilling a 4-inch (100mm) core through the wall to route the refrigerant pipe. The standard rate is ₹150 per inch of wall thickness. For a typical 9-inch brick wall, the total AC hole rate comes to ₹1,350 per hole.
Most split AC installations require 1 hole per AC unit. Always ask your contractor to confirm the exact wall thickness before accepting a quote.
RCC Core Cutting vs. Diamond Saw Wall Cutting
Core cutting uses a hollow diamond-tipped drill bit to create circular holes — ideal for AC pipes, exhaust fans, plumbing, and conduit. Diamond saw cutting makes linear cuts in walls or slabs — used for door openings, window enlargements, or slab trenching. The calculator above covers core cutting rates; for wall/slab linear cutting rates, see the Rate Chart section.
Core cutting rates in India range from ₹80/inch for 2-inch holes to ₹300/inch for 6-inch holes. The most common rate is ₹150/inch for the standard 4-inch AC hole. All rates are per inch of depth (wall/slab thickness).
The standard AC hole cutting rate in India is ₹150 per inch of depth for a 4-inch diameter core. For a 9-inch wall: ₹150 × 9 = ₹1,350 per hole. For a 6-inch wall: ₹900 per hole. Rates may be higher in metro cities or for RCC walls with heavy steel.
Formula: Total Cost = Rate per inch × Depth (inches) × Number of holes. Example: 4-inch core at ₹150/inch through 9-inch wall × 2 holes = ₹2,700. Use the calculator at the top of this page for instant results.
Most contractors charge a minimum visit fee of ₹1,500 to ₹3,000 regardless of the number of holes or cuts. To save cost, schedule multiple holes in one visit.
RCC wall cutting (diamond saw) typically costs ₹100–₹180 per running foot for walls up to 6 inches thick. Brick wall cutting is cheaper at ₹60–₹100 per running foot. Thicker walls and heavily reinforced RCC attract higher rates.
RCC slab cutting rates are typically ₹120–₹200 per running foot for slabs up to 6 inches thick. For circular core holes in a slab, the per-inch rate applies (e.g., ₹150/inch for 4-inch core through a 6-inch slab = ₹900 per hole).
No. Rates in metro cities like Delhi, Mumbai, Bengaluru, and Hyderabad are typically 10–15% higher than in Tier-2 or Tier-3 cities. Rates also vary by contractor, site conditions, and project urgency. Use our enquiry form to get exact quotes from verified contractors in your city.
The rates shown in this calculator are indicative base rates excluding GST. GST at 18% is applicable on core cutting services. Final invoiced amounts will include GST as per contractor's registration status.
Diamond core cutting uses a hollow drill bit with diamond-tipped segments to create precise, clean circular holes in concrete, RCC, or masonry. It is preferred because it creates no cracks, vibration, or structural damage — making it the safest method for cutting holes in load-bearing RCC walls and slabs.
Use the calculator above to estimate your project cost, then submit the enquiry form. You'll receive 3 free quotes from verified contractors in your city within 1 hour — completely free, no commitment required. Compare quotes and choose the best rate.
Core Cutting Services Across India
Verified core cutting contractors available in 500+ cities. Get quotes for RCC cutting, AC hole drilling, slab cutting & wall cutting near you.
Delhi NCR Mumbai Bengaluru Hyderabad Pune Chennai Kolkata Ahmedabad Surat Jaipur Lucknow Noida Gurgaon Chandigarh Indore Bhopal Nagpur Patna Kochi + 480 more cities
