Ongole sits on the busy NH16 route between Guntur and Nellore. It is the headquarters of Prakasam district, a centre for trade, education and healthcare, and home to a strong granite and agro-based economy. As the city grows, buildings along Trunk Road, Mangamuru Road and Kurnool Road keep getting new floors, new staircases and new lifts.
When a concrete roof is in the way, cutting it the right way saves time, money and worry. A trained roof cutting service in Ongole removes only what you planned, without shaking the building or leaving rough edges.
At Core Cutting India, we do exactly that with modern diamond machines and careful site practices.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected]
Quick Facts About Roof Cutting in Ongole
- What: Cutting openings in RCC roofs and slabs with diamond tools
- Why: Stairs, lifts, skylights, ducts, tanks, renovation
- Rate: About ₹120–₹360 per running foot (varies by thickness)
- Time: Often a few hours to one day for homes
- Benefits: Low vibration, low dust, neat edges
- Coverage: Ongole and nearby Prakasam district towns
- Contact: 7009679903
Is Roof Cutting Right for Your Project? A Simple Checklist
Tick the boxes that apply to you:
- ☐ I want a new staircase to reach my terrace.
- ☐ I plan to install a lift in an existing building.
- ☐ I need an opening for pipes, ducts or cables.
- ☐ I want to add a skylight or light well.
- ☐ I need to remove a damaged portion of the slab.
- ☐ I am worried hammering will crack my house.
- ☐ I want a neat finish with minimal repair work.
If you ticked even one, a professional roof cutting service will help you.
Roof Cutting Services We Offer in Ongole
1. Terrace Staircase Opening
A straight, clean cut that fits your staircase design perfectly.
2. Lift Shaft Cutting
Accurate cutting of each floor slab to match the lift shaft dimensions.
3. Skylights and Ventilation Openings
Bring in daylight and fresh air with precisely cut roof openings.
4. Ducts, Pipes and Cable Openings
Rectangular and round openings for AC ducts, plumbing, drains and electrical lines.
5. Granite Unit and Factory Openings
Granite processing units, workshops and godowns often need openings for machines, exhaust systems and material movement. We cut these with care so that your production does not stop for long.
6. Hospital and Clinic Work
Ongole has many hospitals and clinics. We offer low-noise, low-dust cutting that suits sensitive spaces.
7. Partial Slab Removal
Cut out only the section you want to remove. The rest of the slab stays in good shape.
8. Wall Cutting and Core Drilling
We cut openings in concrete walls and drill round holes for pipes and services. For nearby regions, see our Guntur core cutting service.
Roof Cutting Cost in Ongole
Approximate Rates
| Type of Work |
Approximate Cost |
| RCC roof (4–6 inch) |
₹120 – ₹230 per running foot |
| Thick or heavily reinforced slab (6–10 inch) |
₹210 – ₹360 per running foot |
| Core cutting |
By diameter and depth |
| Minimum job charge |
₹3,000 – ₹8,000 |
| Multi-floor or bulk work |
Special quote |
These are indicative rates. We confirm the final price after seeing your site details.
Quick Cost Example Table
| Opening Size |
Approx. Cutting Length |
Likely Cost Range* |
| 6 ft × 2.5 ft (small stair) |
~17 ft |
₹2,000 – ₹3,900 |
| 8 ft × 3 ft (standard stair) |
~22 ft |
₹2,600 – ₹5,000 |
| 10 ft × 4 ft (large opening) |
~28 ft |
₹3,400 – ₹6,400 |
Examples only. Minimum job charges, thickness and site conditions may change the final amount.
What We Need From You to Quote Accurately
- Length and width of the opening
- Slab thickness (if known)
- Floor on which cutting is needed
- Photos of the slab and the room below
- Whether power and water are available
- Whether you want debris removed
Instant Estimate Option
Use the Rate Calculator or WhatsApp your details to 7009679903.
Our Step-by-Step Roof Cutting Process
Step 1 – Share your requirement. Call, message or email us.
Step 2 – We review the site. We check slab thickness, steel, access and the surrounding structure.
Step 3 – You get a clear quote. We explain the price, time and scope.
Step 4 – Marking. Cutting lines are drawn and confirmed with you.
Step 5 – Safety setup. Support is placed, the area below is protected and the zone is barricaded.
Step 6 – Cutting. Diamond tools cut through concrete and steel, with water cooling to keep dust low.
Step 7 – Removal. The cut piece is lifted or lowered safely.
Step 8 – Handover. We check edges, tidy up and give you the finished opening.
Technology Behind Smooth Roof Cutting
| Equipment |
What It Does Best |
| Slab saw |
Long straight cuts in roofs and floors |
| Wall saw |
Deep cuts in thick slabs and walls |
| Wire saw |
Heavy or hard-to-reach sections |
| Ring saw |
Tight spaces and corners |
| Core drill |
Neat round holes |
Because diamond tools grind rather than strike, the cut is smooth and the vibration is minimal. This is especially useful for older buildings and busy commercial spaces.
Safety First – Our Site Rules
- Pre-cut check of the slab and surroundings
- Proper support under the portion to be removed
- Barricaded work area
- Protective gear for the full team
- Safe, earthed electrical connections
- Controlled water and slurry flow
- Coordination with your engineer or contractor
- Clear communication with building owners and neighbours
Note: For openings near beams, columns or load-bearing walls, please take your structural engineer's approval.
Benefits You Get From Our Roof Cutting Service
- Accuracy: The opening matches your plan.
- Safety: Minimal impact on the rest of the building.
- Speed: Faster completion than manual breaking.
- Low disturbance: Less noise, less dust.
- Neat finish: Reduces plastering and repair costs.
- Transparency: You know the cost before we start.
- Reliability: On-time service with trained operators.
Use Cases in Ongole
- Houses: Terrace stairs, new floors, skylights
- Apartments: Lift shafts, ducts, service shafts
- Hospitals and clinics: Quiet, controlled work
- Schools and colleges: Staircase additions and renovation
- Granite and stone units: Openings for equipment and exhaust
- Tobacco and agro godowns: Ventilation and loading openings
- Showrooms and shops along Trunk Road: Floor connections and glass roof openings
- Government and private projects: Retrofitting and upgrades
Where We Work Around Ongole
- Ongole city – Trunk Road, Mangamuru Road, Kurnool Road, Santhapeta and nearby colonies
- Kothapatnam
- Tangutur
- Santhanuthalapadu
- Chimakurthi
- Singarayakonda
- Kandukur
- Addanki
- Chirala
- Markapur
- Bapatla
- Guntur
- Nellore
Other Cities We Serve
We also operate in many other cities across Andhra Pradesh and India. These pages may help you:
If your town is not on the list, call us. We will confirm availability quickly.
Why Customers Prefer Core Cutting India
- Concrete cutting is our main work.
- We use modern diamond machines.
- Our pricing is simple and open.
- We keep your site clean and safe.
- We reply quickly on call, WhatsApp and email.
- We bring experience from many cities to every job.
See our full range of services at corecuttingindia.com.
Frequently Asked Questions: Roof Cutting Service in Ongole
1. How much does a roof cutting service cost in Ongole?
In Ongole, roof cutting usually costs between ₹120 and ₹360 per running foot, depending on slab thickness and steel. Small jobs often have a minimum charge. For an exact figure, use the rate calculator or call 7009679903.
2. Does roof cutting weaken my house?
No, not when done correctly. Diamond cutting removes only the marked portion with minimal vibration. For cuts near structural parts, take an engineer's advice first.
3. How long does it take to cut a roof for a staircase?
Most home staircase openings are completed in a few hours to one day. Thicker slabs and dense steel can increase the time.
4. Do you offer roof cutting near Chirala, Kandukur or Markapur?
Yes. We serve Ongole and nearby towns including Chirala, Kandukur, Markapur, Addanki, Singarayakonda and Tangutur. Call or WhatsApp 7009679903 to check your location.
5. What is the difference between roof cutting and breaking?
Roof cutting uses diamond tools for a clean, controlled cut. Breaking uses hammers or breakers, which cause vibration and cracks. Cutting is safer and more accurate.
6. Can you cut a hole for pipes or ducts?
Yes. We use core drilling for round holes and slab saws for rectangular openings for pipes, ducts and cables.
7. Is water required for roof cutting?
Yes, in most cases. Water cools the blade and keeps dust down. If water is not available on site, tell us in advance so we can plan.
8. How can I book a roof cutting service in Ongole?
Call or WhatsApp 7009679903, or email [email protected] with your location, opening size and photos. We will reply with a quote and the earliest available date.
Conclusion: Your Trusted Roof Cutting Service in Ongole
A new staircase, a lift, a skylight or a service opening should never mean cracks, chaos and costly repairs. A skilled roof cutting service in Ongole gives you clean cuts, safe work and a smooth project from start to finish.
Core Cutting India combines diamond technology, trained operators and honest pricing to serve homes, hospitals, industries and shops across Ongole and Prakasam district. Tell us what you need, and we will take care of the rest.
📞 Call / WhatsApp today: 7009679903 📧 Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Quick estimate: Rate Calculator
