Tuni sits on the busy NH16 corridor between Visakhapatnam and Kakinada. It is a junction town where two districts meet, where trucks and trains pass day and night, and where the famous Tuni mango trade keeps local business active. Houses near the railway station and the town centre are adding floors. Shops along the main road are growing upwards. Small units and godowns around the town are upgrading their buildings.
When any of these projects needs an opening in a concrete roof, a careful roof cutting service in Tuni can save you from cracks, noise and costly repairs.
At Core Cutting India, we cut RCC roofs and slabs with diamond tools. You get a clean opening of the exact size you planned, and your building stays safe.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected]
What Is Roof Cutting?
Roof cutting is the process of cutting a planned opening in an RCC roof or slab using diamond saws, wire saws or core machines. People use it for staircases, skylights, pipe holes, duct openings and partial slab removal. It is cleaner, quieter and safer than hammering.
Why Small-Town Projects Still Need Expert Cutting
Many people think professional cutting is only for big cities. In reality, small towns like Tuni often have more reasons to choose it:
- Older houses may have slabs that crack easily under hammering.
- Closely built streets mean noise and vibration affect neighbours quickly.
- Limited local equipment means many people end up using chisels and hammers.
- Family homes are often occupied during work, so low dust matters.
- Tight budgets make it important to avoid repair costs after the job.
A diamond-cut opening is neat from day one, so you save on plastering, patching and rework.
Roof Cutting Services We Provide in Tuni
1. Terrace Staircase Opening
The most common request in Tuni. We cut a clean, straight opening so your staircase has proper head-room.
2. Skylights and Light Wells
Dark rooms and passages feel bigger with natural light. We cut precise openings for skylights.
3. Pipe, Duct and Cable Openings
Plumbing, drainage, exhaust and electrical lines often need openings in slabs. We cut round and rectangular holes neatly.
4. Water Tank Access
Cutting access openings for terrace and sump tanks.
5. Shop and Showroom Modifications
Connect two floors, add stairs or open a roof section with minimum shutdown of your business.
6. Godown and Mango Storage Openings
Ventilation and pipe openings in storage buildings, done with minimal disturbance.
7. Partial Slab Removal
Remove only the damaged or unwanted portion. The remaining slab stays stable.
8. Wall Cutting and Core Drilling
Wider doors, windows and round holes in concrete. For a larger coastal city nearby, see our Kakinada core cutting service.
Roof Cutting Cost in Tuni
Rate Chart
| Type of Work |
Approximate Price |
| RCC roof (4–6 inch) |
₹120 – ₹230 per running foot |
| Thick or heavily reinforced slab (6–10 inch) |
₹210 – ₹360 per running foot |
| Core holes |
By diameter and depth |
| Minimum charge for small jobs |
₹3,000 – ₹8,000 |
| Larger or multi-cut projects |
Custom quote |
These are indicative prices. Your final quote is based on measurements, thickness and site access.
Job Size and What to Expect
| Job Size |
Examples |
Typical Effort |
| Small |
1–3 pipe holes, small skylight |
Short visit, minimum charge likely |
| Medium |
Home staircase, tank access |
Few hours to one day |
| Large |
Multi-opening shop or godown work |
One to a few days, custom quote |
What Can Change the Price?
- Slab thickness
- Number and thickness of steel bars
- Total cutting length
- Floor level and access
- Water and power availability
- Debris removal
- Urgent or early-morning work
Fast Estimate
Use the Rate Calculator or WhatsApp measurements and photos to 7009679903.
How Our Process Works
Step 1 – Call or WhatsApp. Tell us your Tuni location and what you want to cut.
Step 2 – Review. We check slab thickness, steel and access through a visit or photos.
Step 3 – Quote. You get a clear estimate with scope and time.
Step 4 – Marking. We mark the cutting lines and confirm them with you.
Step 5 – Safety setup. We place supports, protect the floor below and barricade the zone.
Step 6 – Cutting. Diamond blades cut through concrete and steel with water cooling.
Step 7 – Removal. The cut portion is lifted or lowered safely.
Step 8 – Handover. We check the edges and clean up as agreed.
Technology We Use
| Equipment |
Where It Is Used |
| Slab saw |
Long, straight cuts in roofs and floors |
| Wall saw |
Deep cuts in thick slabs and walls |
| Wire saw |
Heavy or hard-to-reach concrete |
| Ring saw |
Corners and tight spaces |
| Core drill |
Round holes for pipes and cables |
Diamond tools grind through concrete rather than hammering it, so vibration stays low and edges stay smooth.
Safety Standards We Follow
- Structural check before cutting
- Support under the section being removed
- Barricaded work and falling zone
- Helmets, gloves, goggles and ear protection
- Safe, earthed power connections
- Water and slurry control
- Coordination with your engineer or contractor
- Respect for neighbours and building rules
Please remember: If the opening is near a beam, column or load-bearing wall, or if your house is old, take advice from a structural engineer first.
Simple Tips for Homeowners in Tuni
- Mark the opening with chalk. It helps us understand your plan quickly.
- Take photos from above and below. This saves time and helps us quote accurately.
- Keep water ready. A tank or tap near the work area is enough.
- Arrange power. A standard supply point is needed.
- Move furniture. Clear the room below the cut.
- Tell your neighbours. A quick word avoids complaints.
- Plan the next stage. Keep your mason ready for staircase construction after cutting.
Benefits of Professional Roof Cutting
- Accuracy: The opening matches your plan.
- Protection: Low vibration, fewer cracks.
- Speed: Faster than manual breaking.
- Comfort: Less noise and dust.
- Savings: Less plastering and repair work.
- Transparency: Costs are clear before work begins.
- Reliability: Trained operators with proper tools.
Who Uses Our Roof Cutting Service in Tuni?
- Homeowners building stairs and extra rooms
- Shop and showroom owners
- Mango traders and godown owners
- Small industry and workshop owners
- Schools, clinics and nursing homes
- Builders and contractors
- Architects and interior designers
- Government and private project teams
Areas We Serve Around Tuni
- Tuni town – railway station area, bus stand side, main road, Sankhavaram road side and nearby colonies
- Thondangi
- Kotananduru
- Payakaraopeta
- Narsipatnam
- Yellamanchili
- Anakapalli
- Prathipadu
- Annavaram
- Pithapuram
- Samalkot
- Kakinada
- Visakhapatnam
- Rajahmundry
Other Cities We Serve
We also work in many other cities across Andhra Pradesh and India. These pages may help you:
If your area is not listed, call 7009679903 and we will confirm availability.
Why Choose Core Cutting India?
- We specialise in concrete cutting and drilling.
- We use modern diamond machines.
- We keep pricing clear and fair.
- We work cleanly and respect your home or business.
- We reply quickly on call, WhatsApp and email.
- We have experience in many cities and building types.
See all our services at corecuttingindia.com.
Frequently Asked Questions: Roof Cutting Service in Tuni
1. What is the cost of roof cutting in Tuni?
Roof cutting in Tuni usually costs ₹120 to ₹360 per running foot, depending on slab thickness and steel. Small jobs often have a minimum charge. For an exact quote, use our rate calculator or call 7009679903.
2. Is roof cutting safe for my house?
Yes. Diamond cutting removes only the marked part with very little vibration. For cuts near beams or columns, take a structural engineer's advice first.
3. How long does roof cutting take?
A normal staircase opening takes a few hours to one day. Thick slabs, heavy steel or difficult access may need more time.
4. Do you provide roof cutting near Narsipatnam, Anakapalli or Annavaram?
Yes. We serve Tuni and nearby towns such as Narsipatnam, Payakaraopeta, Yellamanchili, Anakapalli, Annavaram, Pithapuram and Kakinada. Call or WhatsApp 7009679903 to confirm.
5. Is diamond cutting better than breaking with a hammer?
Yes. It is more accurate, quieter and cleaner, and it protects the rest of the structure. Hammering often causes cracks and extra repair costs.
6. Can you cut small holes for pipes or exhaust fans?
Yes. We use core drilling machines for round holes of different sizes in slabs and walls.
7. Do I need to arrange water and power?
Yes, in most cases. Water cools the blade and keeps dust down. If either is missing, tell us in advance so we can plan.
8. How do I book a roof cutting service in Tuni?
Call or WhatsApp 7009679903, or email [email protected] with your location, opening size and photos. We will send a quote and the earliest available date.
Conclusion: Get a Trusted Roof Cutting Service in Tuni
A new staircase, skylight or pipe opening should not mean cracks, noise and costly repairs. A skilled roof cutting service in Tuni protects your building, saves money and finishes the job neatly.
Core Cutting India brings diamond technology, careful planning and honest pricing to homes, shops and businesses in Tuni and nearby towns. Share your plan with us, and we will cut it right.
📞 Call / WhatsApp now: 7009679903 📧 Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator
