You have a plan. Maybe it is a staircase to the terrace, a new skylight, or a lift shaft for a growing business. The only obstacle is a thick, steel-reinforced concrete roof.
A trusted roof cutting service in Tezu removes that obstacle without damaging the rest of your building. Core Cutting India uses diamond cutting machines to open RCC roofs and slabs with straight edges, low vibration and careful dust control.
We serve Tezu, the headquarters of Lohit district in Arunachal Pradesh, and the towns around it, including homes, shops, hotels, offices, schools and government buildings.
A roof cutting service in Tezu cuts RCC roofs or slabs to a required size or shape using diamond saws and core drills. It is used for staircases, terrace hatches, skylights, lift shafts, duct passages and repair of damaged slab sections. Call or WhatsApp 7009679903 for a free quote.
📞 Speak With Us
Quick Answers About Roof Cutting in Tezu
What is roof cutting? Making a planned opening in a concrete roof using diamond tools.
Is it safe? Yes, when the structure is checked and the cut is planned.
How long does it take? Hours for small openings; one to two days for larger ones.
What does it cost? It depends on thickness, length of cut, steel and location. Indicative rates are in the pricing section below.
Can I stay in the building? Usually yes. Noise and dust are lower than with breaking.
How do I get a quote? Send photos and measurements on WhatsApp 7009679903.
Why Cutting Beats Breaking: A Cost View
Many owners think breaking a roof by hand is cheaper. On paper, it can look that way. In real life, the picture changes.
| Item |
Diamond Cutting |
Breaking With Hammer |
| Machine cost |
Higher |
Lower |
| Labour days |
Fewer |
More |
| Risk of cracks |
Low |
High |
| Plaster and repair |
Minimal |
Heavy |
| Noise and dust |
Controlled |
High |
| Rework chances |
Low |
High |
| Total effect |
Predictable |
Often costs more later |
Once repair, rework and the risk to your structure are counted, cutting is often the better value.
Why Tezu Property Owners Trust Core Cutting India
Accurate Openings
We follow your drawing. You get the opening you planned, not an approximate one.
Low Vibration, Low Stress
Your beams, columns and nearby slab are protected.
Tidy Work
Wet cutting reduces dust, and we remove slurry and debris after the job.
Clear Pricing
We explain how the cost is built. Try our rate calculator for a first estimate.
Planning for Lohit Valley Conditions
Tezu sees warm, humid weather and strong rain in the monsoon. We plan machine movement, power safety and work timing around this.
Friendly, Quick Communication
Share photos by WhatsApp and get practical guidance quickly.
Our Roof Cutting Services in Tezu
Staircase Opening
We mark the stair area, cut the slab and lower the piece safely.
Terrace Hatch
A compact opening for tank access and rooftop maintenance.
Lift and Shaft Opening
Aligned openings across floors for lifts, ducts and utilities.
Skylight and Ventilation Opening
Bring in natural light and airflow to stairwells and kitchens.
Partial Slab Removal
Remove only the damaged section and save the remaining roof.
Core Drilling
Round holes for plumbing, wiring, drainage, AC and fire-fighting pipes.
Related Cutting Services
We also offer wall cutting and floor cutting. Visit these pages for nearby areas:
Roof Cutting Cost in Tezu: Pricing Made Simple
If you are wondering about "roof cutting rate in Tezu" or "slab cutting cost per foot", this section is for you.
How Quotes Are Usually Built
- Per running foot: For straight cuts through slab
- Per hole: For core drilling
- Fixed quote: For staircases, lift shafts and partial removal
Indicative Price Table
| Service |
Charged By |
Approximate Range* |
| RCC roof / slab cutting |
Per running foot |
₹60 – ₹200 |
| Core drilling |
Per hole (by size) |
₹300 – ₹3,000 |
| Staircase opening |
Fixed quote |
After details |
| Lift / shaft opening |
Fixed quote |
After inspection |
| Partial slab removal |
Fixed quote |
By area and condition |
| Travel and equipment shifting |
Fixed |
By distance |
Indicative only. The final amount is confirmed once we understand your site.
What Affects the Final Price?
- Slab thickness
- Length of cutting
- Number and thickness of steel bars
- Floor height and access
- Debris removal needs
- Distance and set-up
- Urgency and working hours
Tips for a Good Quote
- Send clear photos of the roof and the planned opening
- Mention length, width and slab thickness
- Tell us if the building is occupied
- Confirm power and water availability
For a quick idea, use the rate calculator, then call 7009679903 to confirm.
Our Process: From Call to Clean Handover
1. Enquiry
You call or message us with your requirement.
2. Details
You share photos, measurements and purpose.
3. Quote
We provide a transparent estimate and plan.
4. Inspection
For large or sensitive jobs, we visit and check the structure.
5. Marking
We draw the cutting lines. You approve them.
6. Setup
Safety zone, power, water and supports are arranged.
7. Cutting
Diamond cutting with water cooling.
8. Removal and Cleaning
We lower or break down cut pieces safely and clean the area.
Technology Behind Our Work
| Tool |
Best Use |
| Slab saw |
Roof and floor cutting |
| Wall saw |
Vertical and edge cuts |
| Ring saw |
Deeper cuts |
| Wire saw |
Heavy or thick structures |
| Core drill |
Neat round holes |
| Hand-held cutter |
Final trimming |
Each machine uses diamond segments that grind through concrete and steel together, leaving smooth edges.
Safety Is Built Into Every Job
- Structural review before work begins
- Clear warning zone under the roof
- Proper earthing and cable handling
- Full safety gear for the crew
- Props or supports for larger openings
- Controlled lowering of concrete blocks
- No cutting during lightning, heavy rain or strong winds
Note: For old buildings, cracks or very large openings, please consult a structural engineer. We are glad to coordinate with your engineer, architect or contractor.
Engineer Checklist Before Cutting a Roof
If you are working with an engineer, share this list with them.
- [ ] Slab thickness and reinforcement details
- [ ] Position of nearby beams and columns
- [ ] Size and location of the proposed opening
- [ ] Need for temporary props or shoring
- [ ] Plan for trimmer beams or edge strengthening if required
- [ ] Waterproofing and finishing plan
- [ ] Approval from owner, society or authority
This helps us work in line with the structural design.
Where We Serve Around Tezu
We provide roof cutting in Tezu and nearby places in Lohit and surrounding districts, depending on road access and project size.
- Tezu town and nearby villages
- Namsai
- Wakro
- Chowkham
- Sunpura
- Parshuram Kund area
- Hayuliang
- Hawai
- Roing
- Itanagar
- Tinsukia, Digboi, Dibrugarh and Sadiya (Assam)
We also provide services in other cities across India. If your location is not listed, call us and we will confirm.
Use Cases: Where Roof Cutting Helps in Tezu
- Family homes: Terrace staircase, skylight, vent opening
- Hotels and lodges: Lift shaft, kitchen exhaust, new stair access
- Shops and market buildings: Cable and AC openings
- Schools and colleges: Water tank hatches and duct passages
- Hospitals and clinics: Low-vibration cutting for working buildings
- Government offices: Utility and pipeline openings
- Contractors: Post-casting design changes
- Solar and telecom installers: Openings for cables and mounts
What Happens After the Cut?
Cutting is just one stage. For best results, plan these as well.
- Edge treatment: Seal and strengthen the cut edges as advised by your engineer.
- Waterproofing: Very important in a rainy region like Lohit valley.
- Curb or frame: Raise a small curb around terrace hatches.
- Cover or door: Fit it with a proper slope for drainage.
- Stair or railing work: Complete safety guards quickly.
FAQs: Roof Cutting Service in Tezu
1. What is a roof cutting service in Tezu?
A roof cutting service in Tezu cuts RCC roofs or slabs to a required size using diamond saws and core drills. It is used for staircases, hatches, skylights, lift shafts and slab repair, and it causes much less vibration than hammering.
2. How much does roof cutting cost in Tezu?
Roof cutting is usually charged per running foot, per hole or as a fixed quote. Indicative rates range from ₹60 to ₹200 per running foot. The final price depends on thickness, steel, access and distance. Call or WhatsApp 7009679903 for an exact quote.
3. Is it safe to cut an RCC roof?
Yes, when trained operators check the structure first and use diamond tools. For older buildings or large openings, an engineer's advice and temporary supports are recommended.
4. How long does roof cutting take?
Small openings often take a few hours. Larger staircase or shaft openings can take one to two days, depending on slab thickness, steel and access.
5. Do you serve areas near Tezu like Namsai, Wakro and Hayuliang?
Yes. We serve Namsai, Wakro, Chowkham, Sunpura, Parshuram Kund, Hayuliang, Hawai, Roing and other nearby areas, plus Tinsukia, Digboi, Dibrugarh and Sadiya in Assam, subject to access.
6. What should I send to get a quote?
Send your location, opening size, slab thickness if known, the purpose and a few photos on WhatsApp 7009679903. You can also use our rate calculator.
7. Is diamond cutting better than breaking a roof?
In most cases, yes. It gives cleaner edges, lower noise and dust, less vibration and far less repair work afterwards.
8. Do I need permission to cut a roof?
For structural changes in multi-storey or commercial buildings, approval from a structural engineer or the local authority may be needed. Please confirm before work begins.
Book Roof Cutting Service in Tezu Today
If you want a safe, neat and fairly priced roof cutting service in Tezu, Core Cutting India is ready to help. We bring modern diamond equipment, trained operators and careful planning to every job, from a small hatch to a multi-floor shaft.
Make your opening exactly where you want it, and keep your building strong.
📲 Contact Core Cutting India
Send your roof photos and measurements on WhatsApp now and get a free quote.
