You built your house in Amguri with a solid RCC roof. Years later, you want a staircase to the terrace, a second floor for your son's family, or a lift for your parents. The roof that protected you so well is now in the way.
This is where a professional roof cutting service in Amguri helps. Instead of breaking the slab with heavy hammers, we cut it with diamond tools along a marked line. You get a clean opening, the rest of the roof stays strong, and your neighbours are not disturbed by days of banging.
Core Cutting India offers RCC roof cutting, slab cutting, terrace opening and core drilling in Amguri and nearby towns of Sivasagar, Jorhat and Charaideo districts. Our crew works on private homes, shops, schools, tea-estate buildings and commercial properties.
Ready to start? Call or WhatsApp 7009679903 with a photo of your roof. We will reply with a clear quote.
What Is Roof Cutting?
Roof cutting is the controlled removal of a section of a concrete roof or slab using diamond saws, wire saws or core drills. It lets you create openings for staircases, lifts, ducts and skylights without cracking or weakening the surrounding structure. It is cleaner, faster and safer than manual breaking.
Why Roof Cutting Is Common in Upper Assam
Buildings in the Amguri and Sivasagar belt face a few special conditions, and these often lead to renovation and cutting work:
- Heavy rain and humidity age roofs faster, so owners often remove damaged portions and recast them.
- Families grow, and many homeowners add a floor or a terrace room above the existing house.
- Flood-conscious planning pushes people to build safe upper-level spaces, which need proper stair access.
- Shops and godowns along main roads are being upgraded with new floors, shutters and ducts.
- Old government and school buildings need accessibility upgrades such as ramps, lifts and staircases.
All of these jobs involve opening or modifying a concrete slab. A neat cut makes everything that follows easier.
Our Roof Cutting Services in Amguri
Staircase Opening in Existing Roof
The most requested job. We cut the opening to your exact size so your mason or fabricator can fit the staircase or head-room structure.
RCC Slab Cutting for Floor Extension
Adding a new floor? We cut the old slab where it must connect to the new structure and leave the rest intact.
Lift and Elevator Shaft Openings
Accurate dimensions matter here. We follow your drawing and keep the cuts straight and plumb.
Duct, Pipe and AC Openings
Rectangular or round openings for plumbing, drainage, electrical lines and AC ducts can be cut or core drilled quickly.
Skylight and Ventilation Openings
Want more natural light on the upper floor? We make clean cuts for skylights and ventilation shafts.
Damaged Slab Removal
Where a leaking or cracked portion has to be removed, we cut around it in a controlled way so healthy concrete remains.
Core Drilling
Diamond core drilling gives smooth, round holes for pipes, cables and anchor bolts. Read more on our core cutting service in Guwahati page.
Controlled Demolition Cutting
For beams, slabs or entire roofs that must be taken down, we cut them into blocks. This reduces dust, noise and the risk of falling debris.
Technology We Use
The machine chosen depends on slab thickness, steel and site space.
Wall Saw
Mounted on a track, it makes long, straight, deep cuts. Good for large staircase and lift openings.
Ring Saw
Handles deeper cuts than normal blades and works in confined places.
Wire Saw
A diamond wire loops around the concrete and cuts large, thick or awkward sections. Ideal for heavy demolition work.
Hand Saw and Flush Cutter
Perfect for corners and cuts close to walls.
Core Drill Rigs
For round holes in slabs, ranging from small pipe holes to larger duct holes.
All our machines use water cooling to control dust and protect blades. The result is a smoother cut and a cleaner working area.
Step-by-Step: How Your Roof Cutting Job Works
| Step |
What Happens |
| 1. Enquiry |
You call or WhatsApp 7009679903 with photos, slab thickness and opening size. |
| 2. Assessment |
We review the details or visit the site to check steel, beams and access. |
| 3. Quote |
You receive a clear price, timeline and scope of work. |
| 4. Marking |
Cutting lines are drawn as per your plan. |
| 5. Support |
The piece to be removed is propped to avoid sudden falls. |
| 6. Cutting |
Concrete and steel are cut with diamond tools. |
| 7. Removal |
Pieces are lowered by pulley, hand or crane. |
| 8. Cleanup |
Slurry and debris are cleared. The opening is ready for your next stage. |
Safety on Every Roof Cutting Job
A roof is part of your building's structure, so safety comes first. On every site, we:
- Check the roof condition and nearby beams before cutting.
- Support slab sections so they cannot drop unexpectedly.
- Use trained operators with helmets, gloves, shoes and eye protection.
- Clear people and objects from the area below.
- Manage water and slurry to protect floors and electrical points.
- Keep a safe distance from live wires.
Advice: If the opening is close to a column, a main beam or covers a large part of the slab, please consult a structural engineer. We are happy to cut as per their drawing.
Roof Cutting Cost in Amguri: Clear Pricing
Many people worry about hidden costs. So here is how our pricing works in simple words.
What decides the price?
- Total cutting length in running feet.
- Slab thickness, since thicker slabs take more time and blade wear.
- Steel density inside the slab.
- Machine type, as wire saw jobs need more setup.
- Site access and lifting, such as terrace height and removal path.
- Water and power availability.
Indicative price guide
| Service |
Approximate Charge* |
| Wall saw or ring saw roof cutting |
₹150 to ₹450 per running foot (based on thickness) |
| Wire saw cutting |
Quoted per job or per sq ft |
| Core drilling |
Per hole, based on diameter and depth |
| Small openings |
Minimum job charge applies |
| Crane or extra manpower |
Charged only if needed |
Rates are indicative. The exact price is confirmed after we understand your site.
A Simple Way to Calculate
Add up the four sides of your opening to find the cutting length. For example, an opening of 7 feet by 3 feet has a length of 20 running feet. Multiply this by the rate for your slab thickness, and you get a rough estimate before any minimum or setup charge.
For a quicker answer, try our rate calculator or send us a WhatsApp message for a fixed quote.
Estimated Time for Common Jobs
| Job |
Usual Time |
| Small pipe or duct opening |
1 to 2 hours |
| Staircase opening in a home |
Few hours to 1 day |
| Lift shaft opening |
1 to 2 days |
| Heavy or thick slab with wire saw |
2 days or more |
Actual time depends on slab thickness, steel and site access.
Do's and Don'ts Before Roof Cutting
Do:
- Share clear photos and measurements.
- Inform your engineer if the cut is near a beam or column.
- Clear furniture and vehicles from the floor below.
- Keep water and electricity ready on the roof.
- Plan the next stage, like framing or waterproofing.
Don't:
- Start breaking the slab yourself before we arrive.
- Cut steel bars in the slab without checking the plan.
- Allow children or visitors near the work area.
- Choose a contractor only because the quote is lowest. Ask what is included.
Why Choose Core Cutting India in Amguri?
- Accurate cuts with diamond tools, matching your drawings.
- Low vibration to protect your building and neighbours.
- Transparent pricing with no surprise add-ons.
- Right equipment for each type of slab.
- Clean working style. We control water, protect surfaces and tidy up.
- Honest advice. We tell you if cutting is not needed or if an engineer should check first.
- Quick response on call, WhatsApp and email.
Who We Serve
- Home owners in Amguri and nearby villages
- Shop and market owners who need openings without long shutdowns
- Schools, colleges and hospitals upgrading buildings
- Tea-estate offices and staff buildings
- Builders and contractors looking for a reliable cutting partner
- Warehouses and small industries
- Government and institutional projects
Service Areas Near Amguri
We provide roof cutting and slab cutting in Amguri and across Upper Assam, including:
- Amguri town and nearby villages
- Sivasagar town and Simaluguri
- Nazira and Demow
- Sonari, Moranhat and Charaideo
- Jorhat, Titabor and Mariani
- Dibrugarh and Naharkatiya
We are happy to work in neighbouring districts too. You can explore our core cutting service in Sivasagar and core cutting service in Jorhat pages for nearby locations. We also serve other cities across India, so if your project is outside Assam, call us and we will arrange a team.
Questions to Ask Any Roof Cutting Contractor
Before you hire anyone, ask:
- Which machine will you use for my slab thickness?
- Is the quote per running foot or per job?
- Are water, power and crane charges included?
- How will you support the slab before cutting?
- Do you cut the steel bars too?
- How long will the work take?
- Will you clean the site after finishing?
At Core Cutting India, we are happy to answer all of these before we begin.
Frequently Asked Questions (FAQs)
What is roof cutting service in Amguri?
Roof cutting service in Amguri is the professional cutting of RCC roofs and slabs using diamond saws or wire saws. It is used for staircase openings, lifts, ducts, skylights and repair work without damaging the rest of the building.
How much does roof cutting cost in Amguri?
Roof cutting in Amguri generally costs between ₹150 and ₹450 per running foot, depending on slab thickness and steel. Small jobs may have a minimum charge. Use our rate calculator or WhatsApp 7009679903 for an accurate quote.
Can I cut a staircase opening in an old RCC roof?
Yes. We can cut a staircase opening in an existing RCC roof to your exact size. If the opening is near a beam or column, we recommend confirming with an engineer first.
Is roof cutting safe for my building?
Yes, when done by trained professionals. Diamond cutting creates very little vibration, and we support the slab before cutting, so the building around the opening stays safe.
How long does roof cutting take?
Most home openings take a few hours to a day. Thicker slabs, lift shafts and wire saw work can take longer. We confirm the time with your quote.
Do you provide roof cutting near me in Sivasagar and Jorhat?
Yes. We serve Amguri, Sivasagar, Nazira, Demow, Jorhat and other towns in Upper Assam, along with other cities across India. See our Guwahati core cutting page for more locations.
Can you cut through steel bars in the slab?
Yes. Our diamond blades and wires cut through concrete and reinforcement steel together, leaving a clean edge.
How can I book a roof cutting service in Amguri?
Call or WhatsApp 7009679903, or email [email protected]. Share a photo, slab thickness and opening size, and we will send you a quote and a suitable date.
Book Roof Cutting Service in Amguri Today
If you want a clean, safe and fairly priced roof cutting service in Amguri, Core Cutting India is ready to help. Tell us what you plan to build or renovate, and we will take care of the cutting from start to finish.
Send a photo of your roof on WhatsApp today and get a free, no-obligation quote.
