If you are planning to open your roof in Udalguri, you probably have more questions than answers. Which machine is right? Will it crack my walls? How much will it cost? Can it be done in a day?
This page answers those questions in plain language. And if you would rather talk to someone, our team is one call away.
Core Cutting India offers professional roof cutting service in Udalguri and nearby towns such as Tangla, Harisinga, Bhergaon and Mangaldoi. We cut RCC roofs, slabs, beams and terrace sections using diamond tools, so your building stays safe and your project stays on schedule.
Want a quick quote? Call or WhatsApp 7009679903 with a photo of your roof and the opening size.
What Is Roof Cutting?
Roof cutting is the use of diamond saws, wire saws or core drills to cut a planned opening or section out of a concrete roof, without damaging the surrounding structure. It is the preferred method for staircase openings, lift shafts, ducts and renovation work.
Which Cutting Method Does Your Roof Need?
Different jobs call for different tools. Use this table as a simple guide.
| Your Project |
Best Method |
Why |
| Staircase opening in a home roof |
Wall saw or ring saw |
Straight, clean edges |
| Lift shaft in an old building |
Wall saw with careful marking |
Accuracy matters |
| Round hole for pipe or drain |
Core drill |
Smooth, exact holes |
| Very thick slab or heavy beam |
Wire saw |
Cuts any size or depth |
| Cut close to a wall or corner |
Hand saw / flush cutter |
Reaches tight spots |
| Removing a whole section or parapet |
Wire saw plus block cutting |
Safe lifting in pieces |
Not sure which one fits? Send us a photo on WhatsApp, and we will suggest the best option.
Our Roof Cutting Services in Udalguri
Staircase Openings in Finished Roofs
Many houses in Udalguri were built without terrace access. We cut the opening to your size, ready for stairs.
Slab Cutting for New Floors
Adding a floor above an existing house? We cut the old slab at the connection points and keep the rest strong.
Lift and Shaft Cutting
For homes, offices and public buildings that want a lift, we make precise openings that follow your drawings.
Duct, Pipe and AC Line Openings
We cut or drill openings for plumbing, drainage, cables and AC ducts.
Skylight and Ventilation Cutting
Brighten up dark staircases and upper rooms with neat openings.
Damaged Roof Portion Removal
If part of your roof is leaking or cracked, we cut it out cleanly so it can be recast.
Core Drilling
Round holes in slabs, beams and walls for pipes, cables and anchors. Learn more at our core cutting service in Nagaon page.
Controlled Demolition Cutting
When a roof or beam must be removed, we cut it into blocks and lower them safely. This keeps dust and noise low and protects neighbouring structures.
Technology That Makes the Difference
Diamond Wall Saw
Runs on a track and makes long, deep, straight cuts. It is the first choice for most stair and lift openings.
Ring Saw
Reaches deeper than a standard blade and fits in tighter spaces.
Diamond Wire Saw
A wire coated with diamond segments wraps around the concrete and cuts large sections of any thickness. It is ideal for heavy work.
Core Drill
Makes round holes of different sizes quickly and accurately.
Water Cooling and Slurry Control
Water keeps the blade cool, reduces dust and gives a smoother surface. We collect the slurry so your floors stay clean.
What Happens When You Hire Us
Day 0: Enquiry. You call or WhatsApp us. We ask for photos, slab thickness and opening size.
Day 0 or 1: Quote. We share a rate, timeline and scope. For bigger jobs, our engineer may visit.
Day of work, morning: Our crew arrives, marks lines and sets up props, water and barricades.
Day of work, midday: Cutting begins. Concrete and steel are cut together along the marked lines.
Day of work, afternoon: Blocks are lifted out safely. The area is cleaned.
Handover: You get a neat opening, ready for your mason or fabricator.
Larger jobs, such as lift shafts and wire saw work, may take more than one day. We will tell you the timeline in advance.
Safety First, Every Time
Your roof is part of your building's structure. We handle it with care by:
- Checking the slab, beams and columns before cutting
- Propping the section to be removed so it cannot drop
- Using trained operators with helmets, gloves, shoes and eye protection
- Keeping the area below clear of people and vehicles
- Managing water and slurry near electrical points
- Staying clear of live wires
Good to know: If you plan to cut near a main beam or column, or open a large share of the slab, have a structural engineer approve the plan. We can follow their drawings exactly.
Roof Cutting Cost in Udalguri: Real Numbers, Plain Language
What makes the price go up or down?
- Running feet to be cut
- Slab thickness
- Steel density
- Machine type
- Access to the roof and lifting needs
- Distance from our team to your site
Indicative rate table
| Service |
Approximate Rate* |
| Wall saw / ring saw cutting |
₹150 to ₹450 per running foot, by thickness |
| Wire saw cutting |
Per job or per sq ft |
| Core drilling |
Per hole, by diameter and depth |
| Small openings |
Minimum job charge may apply |
| Crane or extra manpower |
Charged only if required |
Rates are indicative. We confirm the final price after checking your site details.
Rough estimates for common jobs
| Job |
Cutting Length |
What to Expect |
| Stair opening, 8 ft × 3 ft |
22 running feet |
Multiply by your slab rate, plus any minimum charge |
| Lift opening, 6 ft × 6 ft |
24 running feet |
Multiply by your slab rate, plus setup |
| Duct opening, 2 ft × 1 ft |
6 running feet |
Likely a minimum job charge |
For a quick figure, use our rate calculator. For a fixed price, send photos on WhatsApp.
Why Cutting Beats Breaking
| Factor |
Diamond Cutting |
Manual Breaking |
| Edge finish |
Straight, smooth |
Rough, uneven |
| Vibration |
Very low |
High |
| Risk of cracks in walls |
Low |
High |
| Dust and noise |
Controlled |
Heavy |
| Time needed |
Short |
Long |
| Repair cost afterwards |
Small |
Often large |
Breaking by hand may look cheaper at first. But repair work on beams, plaster and bent steel adds up fast.
Common Mistakes to Avoid
- Choosing the lowest quote without checking what it includes. Ask about water, crane and cleanup.
- Skipping the engineer's check for openings near beams or columns.
- Starting to break the slab yourself before the cutting team arrives.
- Ignoring the next stage. Plan for stair frames, waterproofing or recasting.
- Forgetting access. Make sure workers and machines can reach the roof.
- Not clearing the area below. Cut blocks and slurry need space.
Where Our Roof Cutting Service Is Used
- Homes adding terrace stairs, extra rooms or water tanks
- Shops and markets extending upwards
- Schools and colleges adding stairs, ramps and lifts
- Clinics and hospitals needing low-dust work
- Government buildings and quarters under renovation
- Guest houses and small hotels expanding capacity
- Rice mills, godowns and workshops making space for machines
- Builders and contractors looking for a reliable partner
Areas We Serve Near Udalguri
We provide roof cutting and slab cutting in Udalguri and the surrounding region, including:
- Udalguri town and nearby villages
- Tangla and Harisinga
- Bhergaon and Mazbat
- Kalaigaon and Rowta
- Dalgaon and Mangaldoi
- Dhekiajuli and Tezpur
We work in other parts of Assam too. Visit our pages for core cutting service in Dhubri and core cutting service in Karimganj. We provide service in other cities across India as well. If your project is outside Assam, call us and we will arrange a team.
Why Customers Choose Core Cutting India
- Clear, upfront pricing with no hidden extras
- Accurate cuts that match your drawings
- Low vibration to protect your building and neighbours
- Right machine for every slab
- A tidy, respectful crew
- Honest guidance, including when an engineer should be involved
- Fast replies on call, WhatsApp and email
- Simple communication in Hindi, Assamese, Bengali and English
Before You Book: A Quick Checklist
- [ ] Photos of the roof and planned opening
- [ ] Length and width of the opening
- [ ] Approximate slab thickness
- [ ] Positions of beams and columns
- [ ] Water and electricity on the roof
- [ ] Clear space below
- [ ] A safe path for lifting out cut blocks
- [ ] Your mason or fabricator ready for the next step
Frequently Asked Questions (FAQs)
What is roof cutting service in Udalguri?
Roof cutting service in Udalguri is the professional cutting of RCC roofs and slabs with diamond saws or wire saws. It is used for staircases, lifts, ducts and repairs, and it protects the rest of the building from damage.
How much does roof cutting cost in Udalguri?
Roof cutting in Udalguri usually costs ₹150 to ₹450 per running foot, depending on slab thickness and steel. Small jobs may have a minimum charge. Use our rate calculator or WhatsApp 7009679903 for an exact quote.
Which is better for roof cutting: wall saw or wire saw?
A wall saw is best for straight, regular openings like stairs and lifts. A wire saw is better for very thick slabs, heavy beams and demolition. We choose the right one after reviewing your site.
Can I add a staircase to my existing terrace?
Yes. We can cut a staircase opening in your existing RCC roof to your size. If it is close to a beam or column, please confirm the plan with a structural engineer.
How long does roof cutting take?
A standard home opening takes a few hours to one day. Lift shafts, thick slabs and wire saw jobs can take longer. You get the timeline along with the quote.
Do you provide roof cutting near me in Tangla and Mangaldoi?
Yes. We serve Udalguri, Tangla, Harisinga, Bhergaon, Mangaldoi, Dalgaon and nearby towns, and we work in many other cities across India. See our Dhubri core cutting page for more areas.
Is roof cutting safe for my building?
Yes, when done by trained professionals. Diamond cutting causes very little vibration, and we support the slab before cutting so nearby walls and beams stay safe.
How do I book roof cutting service in Udalguri?
Call or WhatsApp 7009679903, or email [email protected]. Share a photo, slab thickness and opening size, and we will send a quote and a suitable date.
Book Your Roof Cutting Service in Udalguri Today
If you need a clean, safe and fairly priced roof cutting service in Udalguri, Core Cutting India is ready to help. Share your plan with us, and we will handle the cutting from start to finish.
Send a photo of your roof on WhatsApp now and get a free, no-obligation quote.
