On most interior sites, nobody is responsible for core cutting. The owner assumes the designer has it covered. The designer assumes the contractor will sort it out. The contractor assumes the AC or chimney vendor will mark the spot. And so, three weeks in, a crew is drilling through a freshly laid floor.
This guide fixes that. Instead of another generic checklist, we've organised the preparation by who does what and when, so every person on the project knows their part. Whether you're an owner, an interior designer or a site supervisor, you'll find your tasks below, along with a one-page "core cutting brief" you can copy and send to your contractor.
Interior project starting soon? Lock in your openings first. 📞 Call: 7009679903 | 💬 WhatsApp: Send your drawing or photos | ✉️ info@corecuttingindia.com
Why This Step Gets Missed
Interior work is visual. Clients talk about colours, finishes and furniture. Core cutting is invisible: once the job is done, the holes are hidden behind pipes, ducts and panels. Because it isn't glamorous, it gets pushed down the list until something forces the issue.
The result is usually one of three problems:
- Dust and slurry on finished surfaces, because wet cutting happens after painting
- Moved or misplaced holes, because the layout changed after drilling
- Schedule delays, because the cutting crew can't be booked at short notice
All three are avoidable with a little planning. To understand the process behind them, see our core cutting service page.
The T-Minus Timeline: What to Do and When
Think of the interior start date as "Day 0." Work backward.
Three to four weeks before: Decide
- Freeze the layout of kitchen, bathrooms, AC units and furniture
- Produce a simple services drawing marking every opening
- Confirm the scope with your designer or contractor
Two weeks before: Confirm
- Get permission from your society, landlord or building manager
- Speak to your plumber, electrician and AC technician and agree the hole list
- Collect any building drawings you have
- Request quotes and compare contractors
One week before: Book and prepare
- Book your core cutting date, ideally before false ceiling, tiling and paint work
- Mark positions on the walls and photograph them
- Check power, water and access
One day before: Final checks
- Test the power point and water supply
- Move furniture and cover floors
- Reconfirm arrival time and your phone number with the contractor
Day of cutting: Supervise
- Walk the crew through each marked spot
- Inspect every hole before they leave
- Photograph and share them with the other trades
After cutting: Close the loop
- Sleeve and seal the openings
- Hand the photographs and hole list to the plumber, electrician and AC installer
- Then release the site for rough-in and finishing
Treat these dates as a guide, not a rule. A small flat may need less lead time and a large villa may need more.
Role by Role: Who Owns Which Task?
If you are the homeowner
Your job is to decide and approve.
- Confirm furniture and appliance positions early
- Arrange permissions from society or landlord
- Make sure someone is on site on cutting day
- Approve hole positions in writing, even by WhatsApp
If you are the interior designer
Your job is to translate the design into openings.
- Prepare a services drawing showing every hole, size and height
- Check hole positions against tile layouts, false ceiling lines and cabinet runs
- Share the drawing with every trade at the same time
- Flag any hole that comes close to a beam, column or corner
If you are the site supervisor or contractor
Your job is to sequence and protect.
- Book core cutting before finishing trades start
- Check that power, water and access are ready
- Confirm the crew has the hole list
- Inspect openings, then ensure they are sleeved and sealed
If you are the core cutting crew
Your job is to check, cut and clean up.
- Inspect for steel, wiring and pipes before drilling
- Use wet diamond core drilling with the right bit size
- Control slurry and protect nearby surfaces
- Leave the site clean and the holes accurate
When every role is clear, the job runs smoothly. When roles blur, things get missed.
The Core Cutting Brief: Copy, Fill, Send
Send this to your contractor along with photos. The more complete it is, the more accurate your quote and the smoother the job.
CORE CUTTING BRIEF
Name & phone:
Site address / city / floor:
Lift available? (Yes/No) Parking/access notes:
Wall / slab type (brick, RCC, unknown):
Building age:
Hole 1: Location ______ Diameter ____ Thickness ____ Height from floor ____ Slope? ____
Hole 2: Location ______ Diameter ____ Thickness ____ Height from floor ____ Slope? ____
Hole 3: ...
Near beam / column / corner? (Yes/No):
Known pipes or wiring behind wall:
Power point available? (Yes/No) Water available? (Yes/No)
Permission taken? (Yes/No)
Preferred date and time window:
Interior start date:
Attach a photo of each marked spot and one wider photo of the room.
Match Your Project Type to Your Preparation
Different projects need different emphasis.
| Project | Prepare most carefully |
|---|---|
| Apartment or flat | Society permission, working hours, outer-wall appearance |
| Independent house or kothi | Wall thickness, older renovations, boundary-side holes |
| Shop or showroom | Opening hours, stock protection, cable and AC routes |
| Office fit-out | Building management approval, ducting, after-hours work |
| Clinic or restaurant | Exhaust and chimney routes, hygiene and cleanup standards |
For kitchen exhaust and ventilation jobs, our Jalandhar guides on chimney hole cutting and exhaust fan hole cutting are good starting points.
Choosing the Right Method Early
Knowing the type of opening saves time on quotes.
- Round holes for pipes and ducts use core cutting
- Rectangular openings use wall cutting
- Floor or roof openings use slab cutting
- Structural elements may require beam cutting and an engineer's approval
- New entrances use door cutting
If you're unsure, describe what will pass through the opening and let the contractor suggest the method.
Hidden Risks to Raise Before Drilling
- Steel reinforcement that slows cutting or shifts the hole position
- Electrical conduits that must be avoided or isolated
- Water or gas pipes inside walls and slabs
- Structural members that need engineer approval
- Post-tensioned cables in some commercial or large-span slabs, where cutting without expert confirmation can be dangerous
Ask your contractor how they check for these. A confident, specific answer is a good sign.
Budgeting for Core Cutting
Core cutting is usually a small portion of a full interior budget, but it is easy to leave out. Price depends on diameter, thickness, material, height, access, number of holes and location. Batching all holes into one visit is usually more economical than multiple separate calls.
For a quick starting estimate, use our Core Cutting Rate Calculator. Our platform's general guide shows roughly ₹150 to ₹800 per hole, but complex or large-diameter jobs may be higher. Always confirm the final quote on a call or by WhatsApp, and ask what's included.
What a Good Handover Looks Like
When the crew finishes, you should have:
- Every hole at the marked position and diameter
- Clean, round edges with no cracking
- Correct slope where required
- No exposed reinforcement left untreated
- Debris and slurry cleared
- Photographs of each opening
- A confirmed list shared with the other trades
If anything is off, mention it before the crew leaves, not a week later.
Common Mistakes Interior Teams Make
- Booking core cutting after the false ceiling or paint is done
- Changing the layout after holes are marked
- Letting each trade mark their own holes separately
- Skipping the other-side check on outer walls
- Treating the cheapest quote as the best
- Forgetting to seal openings before finishing
For the sequence from the owner's side, see our related guide on what to arrange before core cutting and the 10-point home check.
Local Note: Interior Projects Across Punjab
Punjab interior work is booming in both new apartments and older family homes being modernised. In the older houses, walls may be thick and previously patched, so it pays to share photos and the building's approximate age. In busy markets and narrow lanes in cities like Ludhiana, Amritsar and Jalandhar, mention parking and access when you call. Designers handling several sites in one city can save time by booking one contractor for multiple visits.
To compare contractors, ratings and reviews near you, see our Punjab core cutting service page. Outside Punjab? Pick your own city from the homepage, since rates and conditions vary by location.
Frequently Asked Questions
What core cutting preparations are needed before interior work?
Finalise your layout, create a services drawing, agree the hole list with all trades, get permissions, mark positions, arrange power and water, and book cutting before finishing work begins.
Who is responsible for core cutting on an interior project?
It should be assigned clearly. Usually the designer prepares the hole drawing, the site supervisor schedules the work, the owner approves positions, and the core cutting crew carries it out.
How early should I book core cutting?
Ideally a week or more before interior work starts, so the date fits before false ceiling, tiling and painting. Large projects may need more lead time.
What information does a contractor need for a quote?
City and floor, wall or slab type, number of holes, diameters, thickness, height, any slope, access details and photos.
How much does core cutting cost?
It depends on diameter, thickness, material, access and city. Our general range is about ₹150 to ₹800 per hole. Use the Rate Calculator and confirm with your contractor.
Can core cutting be done after interiors are finished?
It's possible but riskier and messier, because slurry and vibration can damage finished surfaces. Planning it first is cleaner and usually cheaper.
How do I book core cutting for my project?
Call or WhatsApp 7009679903 with your city, hole details and photos for guidance and a quote.
Start Your Interior Project With Clean, Accurate Openings
Send us your drawing or a few photos, and we'll help you plan the cutting and connect you with a verified contractor before your interior team arrives.
📞 Call or 💬 WhatsApp: 7009679903
✉️ Email: info@corecuttingindia.com 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator