Bawana is where Delhi makes things. Rows of factories, packaging units, cold stores and warehouses sit in the industrial area, while villages and residential colonies grow around them. In such a place, buildings change often. A factory adds a new production line, a godown needs better ventilation or a family wants a staircase to the terrace.
Almost every one of these changes needs an opening in a concrete roof. Breaking it with hammers is slow and risky, and it can disturb machines, stock and workers nearby. A professional roof cutting service in Bawana gives you a cleaner way to get it done.
At Core Cutting India, we cut RCC roofs and slabs using diamond wire saws, slab saws and hand saws. The openings come out straight and accurate, the vibration stays low and your operations can continue with minimal disturbance.
Call or WhatsApp 7009679903 for a free quote, or check an instant estimate on our rate calculator.
Quick Answer: What Is Roof Cutting?
Roof cutting is a method of cutting a precise opening in a concrete roof or slab with diamond-tipped machines, without breaking the rest of the structure.
It is also called RCC cutting, slab cutting or roof opening cutting. The machine moves along a marked line and cuts through concrete and steel bars, leaving clean edges. It is commonly used for staircases, lifts, ducts, skylights, exhaust fans, crane openings and partial roof removal.
Why Roof Cutting Matters in Bawana
Bawana is different from many other parts of Delhi. Here is what we see most often:
- Industrial buildings with thick slabs. Factory roofs and mezzanines are often heavier and have more steel than a normal house roof.
- Machines and stock below. Heavy vibration can disturb machines, shelves and stored goods.
- Tight production schedules. Factories cannot stay closed for long, so work must be quick.
- Growing units. Many owners add floors, offices or lifts as their business expands.
- Mixed surroundings. Villages and residential blocks sit close to industrial plots, so dust and noise must be controlled.
- Large open areas. Machines can be set up easily, which helps us work faster.
Machine cutting fits these needs because it is accurate, quick and far less disruptive.
Our Roof Cutting Services in Bawana
1. Factory Roof Opening Cutting
We cut openings in factory slabs for exhaust systems, ducting, conveyor lines, overhead cranes and new equipment.
2. Godown and Warehouse Slab Cutting
Storage buildings need ventilation, chutes, hatches and loading openings. We cut these to size without harming the surrounding roof.
3. Lift Shaft and Goods Lift Openings
Industrial goods lifts and passenger lifts need exact openings across floors. We cut each level to your drawing.
4. Staircase Opening for Office and Residential Floors
Whether you are adding an office floor above a unit or a terrace staircase in a house, we cut the opening neatly.
5. Mezzanine and Double-Height Cutting
Open up space by cutting a portion of the slab for storage mezzanines, showrooms or high-ceiling production halls.
6. Duct, Pipe and Cable Holes
For HVAC, fire-fighting lines, plumbing and cable trays, we make core holes and rectangular cuts.
7. Skylight and Ventilation Opening
Reduce heat and bring in daylight with properly cut openings.
8. Partial Roof Removal
When a damaged portion needs to go, we cut it into blocks and lower them safely.
We also provide wall cutting, floor cutting and core drilling if your project needs more than one service.
How Our Process Works
Step 1: Enquiry. Call or WhatsApp 7009679903 with photos, slab thickness and the size of the opening.
Step 2: Site visit. We check the roof, beams, columns and access points. In factories, we also note machines and safe working zones.
Step 3: Marking. Cutting lines are marked as per your drawing or your engineer's advice.
Step 4: Quotation. You get a transparent price based on running feet, slab thickness and access.
Step 5: Setup. We position the machine, connect water and power and support the cut section.
Step 6: Cutting. The diamond blade or wire cuts through concrete and steel along the line.
Step 7: Lifting. Cut blocks are lowered with a crane, chain pulley or other suitable lifting method.
Step 8: Cleaning. We clear the debris and hand over a neat opening.
Technology and Machines We Use
| Machine |
Best For |
| Diamond wire saw |
Very thick slabs, heavy industrial RCC, tough access |
| Slab saw |
Long, straight cuts on flat roofs |
| Hand-held ring saw |
Corners and edges |
| Core drilling machine |
Round holes for pipes and ducts |
| Wall saw |
Vertical cuts near parapets and walls |
For factory roofs with heavy steel, wire saws are often the best choice because they can cut thick sections smoothly with little vibration. All blades are diamond-tipped and water-cooled, which keeps dust down and improves the finish.
Roof Cutting Cost in Bawana: Clear Pricing Guide
Cost depends on the kind of roof and the job. Here is a simple way to understand it.
What Affects Your Price?
- Slab thickness
- Total length of cut in running feet
- Amount of steel reinforcement
- Height and access
- Machine type
- Lifting and debris removal
- Working hours and urgency
Approximate Rates
| Type of Work |
Approx. Rate |
| Slab cutting up to 6 inch |
₹60 – ₹120 per running foot |
| Slab cutting 6 to 12 inch |
₹120 – ₹250 per running foot |
| Core holes (pipes, ducts) |
₹300 – ₹1,500 per hole |
| Small staircase or duct opening |
₹5,000 – ₹25,000 per job |
| Factory or godown opening |
Quoted after site visit |
These figures are indicative. The final cost depends on your site. For an exact price, use the rate calculator or WhatsApp 7009679903.
Tip for factory owners: If you plan several openings across floors, share the full list at once. Combined jobs are usually quoted better than separate visits.
Benefits of Machine Roof Cutting for Industrial and Home Owners
- Exact sizes that match engineering drawings.
- Low vibration that protects beams, columns and machines.
- Less downtime because work is fast and focused.
- Reduced dust with water-cooled cutting.
- Cleaner edges that need little finishing.
- Safer working conditions for staff and workers below.
- Lower repair cost compared with breaking.
Machine Cutting vs Hammer Breaking
| Point |
Machine Cutting |
Hammer Breaking |
| Accuracy |
High |
Low |
| Vibration |
Very low |
High |
| Risk to machines/stock |
Minimal |
High |
| Dust |
Controlled |
Heavy |
| Speed |
Faster |
Slower |
| Repair after |
Little |
A lot |
| Safety |
High |
Risky |
Use Cases in Bawana
- A garment or packaging unit needs a roof opening for a new exhaust system.
- A cold storage owner wants to add ducting for refrigeration lines.
- A warehouse needs a hatch for goods to be lifted to the upper floor.
- A manufacturing unit is adding a goods lift between floors.
- A builder is constructing an extra office floor above a factory.
- A family in a village house wants a terrace staircase.
- A workshop wants a skylight to cut down on electricity use during the day.
If your need looks like one of these, we can help.
Safety Standards We Follow
Industrial sites carry extra risks, so safety is built into every job.
- We inspect the slab, beams and surroundings before cutting.
- We support heavy blocks so they cannot fall.
- We keep workers and your staff out of the area below.
- We use water cooling to control dust.
- Our team wears helmets, gloves, goggles, ear protection and safety shoes.
- We follow electrical safety rules because water and power are used together.
- We coordinate with your site supervisor or engineer on timing and access.
Important: For openings near beams or columns, please take a licensed structural engineer's approval first. We are happy to work with their drawing.
Areas We Serve Around Bawana
We provide roof cutting in Bawana and nearby North West Delhi and border areas, including:
- Bawana Industrial Area (Sectors 1 to 5)
- Bawana JJ Colony
- Narela and Narela Industrial Area
- Holambi Kalan
- Auchandi
- Kanjhawala
- Daryapur Kalan
- Qutabgarh
- Rohini (including Sectors 24 to 36)
- Shahbad Dairy
- Prahlad Pur
- Alipur
- Kundli (Sonipat)
- Bahadurgarh
More Services Across Delhi
For other parts of the city, see our wall cutting services in Sarojni Nagar, Punjabi Bagh and Pitampura.
Cities We Serve Beyond Delhi
Core Cutting India also provides roof and slab cutting in Gurugram, Noida, Ghaziabad, Faridabad, Sonipat, Panipat, Chandigarh, Ludhiana, Jaipur and other cities across North India. If your city is not listed, call us and we will tell you the nearest available team.
Why Customers Trust Core Cutting India
Experience: We handle roof, wall, floor and core cutting for houses, shops, offices and industrial buildings.
Expertise: We match the machine to your slab thickness, steel content and access, which is why our cuts are clean.
Authority: Contractors, architects and plant managers contact us for openings that match their drawings.
Trust: We share a clear price up front, explain the method and respect your site, schedule and neighbours.
Before You Book: Quick Checklist
- Decide the exact size and location of the opening.
- Share the drawing or get an engineer's opinion for large cuts.
- Keep water and power ready near the roof.
- Clear machines, stock and people from the area below.
- Plan lifting arrangements for heavy blocks.
- Compare quotes on machine type and safety, not only price.
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Bawana?
Roof cutting in Bawana usually starts around ₹60 to ₹120 per running foot for thinner slabs and increases with thickness and steel content. Small openings often cost ₹5,000 to ₹25,000. For an accurate quote, call 7009679903 or use our rate calculator.
2. Can you cut thick factory roofs and heavy RCC slabs?
Yes. We use diamond wire saws and slab saws that can cut thick RCC slabs and steel bars cleanly. For factory roofs, we plan the cut and lifting method after a site visit.
3. Is roof cutting safe for machines and stock below?
Yes. Diamond cutting creates very little vibration compared with hammer breaking. We also support the cut section and keep the area below clear, which protects people and equipment.
4. How long does roof cutting take?
A small opening can be done in a few hours. Larger or thicker slabs may take one to three days, depending on cutting length, steel and lifting needs.
5. Do you offer roof cutting near me in North West Delhi?
Yes. We serve Bawana, Narela, Holambi Kalan, Auchandi, Rohini, Kanjhawala and nearby areas. Call or WhatsApp 7009679903 to check availability.
6. Will the work create a lot of dust and noise?
No. We use water-cooled blades, which keep dust low. The noise is also much lower than manual breaking, which suits industrial units and homes alike.
7. Do I need permission before cutting a roof?
For major structural changes, you may need approval from a structural engineer, building owner or local authority. Please check the rules for your plot before starting.
8. How can I get a quick quote?
Send the slab thickness, cutting length and photos on WhatsApp at 7009679903, or email [email protected]. You can also use our online rate calculator.
Book Your Roof Cutting Service in Bawana Today
If you want a clean, safe and fairly priced roof cutting service in Bawana, Core Cutting India is ready to help. From a small duct hole in a house to a large opening in a factory roof, we bring the right machines, trained operators and honest pricing to every job.
📞 Call Now: 7009679903 💬 WhatsApp: 7009679903 ✉️ Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Instant Estimate: Rate Calculator
Send us your requirement today and get a free, no-pressure quote for roof cutting in Bawana and nearby areas.
