Jhandewalan is one of those neighbourhoods in Delhi where heritage buildings stand right next to freshly built commercial towers, and where a DDA flat from the 1980s could share a lane with a brand-new mixed-use development. Working on such a varied built environment demands not just tools — it demands experience, careful judgement, and the right technology.
That is exactly what Core Cutting India brings to every job in Jhandewalan. Our expert teams deliver precise core cutting services in Jhandewalan — for everything from a single AC pipe hole in a ground-floor shop to a complex multi-opening project in a multi-storey commercial building near the Jhandewalan Metro Station corridor.
We do not break walls. We cut them — cleanly, accurately, and without disturbing anything around the cut.
📞 Call / WhatsApp: 7009679903 ✉️ Email: [email protected]
The Problem With How Most People Cut Concrete in Jhandewalan
Walk through any renovation site in Central Delhi — Jhandewalan, Karol Bagh, or Paharganj — and you will almost certainly see workers chiselling or hammer-drilling through walls to create pipe holes or cable channels. The result? Jagged, irregular openings, cracks spreading beyond the cut area, hidden wire damage, plaster falling off on the other side, and noise that carries three floors up.
This approach works — barely — on new, thin partition walls. But Jhandewalan has many buildings with thick RCC load-bearing walls, old brick-lime mortar construction, and tight service shafts where precise cutting is not a luxury but a necessity.
Diamond core cutting eliminates every one of these problems:
- Cuts are perfectly circular and smooth — ready for pipe or conduit insertion without gap-filling
- No vibration radiates into the surrounding wall, protecting plaster, tiles, and structural integrity
- Dust is suppressed by water cooling — critical in occupied commercial and residential buildings
- Works through any material: old brick, RCC, stone, granite, marble cladding, compound walls
Complete Range of Core Cutting Services in Jhandewalan
Diamond Core Hole Drilling
Our most requested service across Jhandewalan and the surrounding Central Delhi belt. We drill precise circular holes in:
- Brick and mortar walls (shop fronts, residential, institutional)
- RCC slabs, beams, and columns
- Stone and granite-clad surfaces
- Compound and boundary walls
Available diameters: 50mm to 900mm Depth range: Up to 1,500mm for specialised structural applications
Common uses locally: AC split unit pipe penetrations, bathroom exhaust outlets, kitchen chimney venting, CCTV and intercom conduit runs, internet and data cable routing through walls, gas pipeline connections.
RCC and Brick Wall Cutting
Creating a new door opening, window, or internal passage in an existing wall is a significant structural intervention — but when done with our track-mounted wall saw, it is also a remarkably clean and controlled one.
We handle wall cutting in:
- Residential apartments and builder floors in the Jhandewalan–Rani Jhansi Road belt
- Commercial offices and showrooms near DB Gupta Road and Ramji Das Market
- Institutional buildings including schools and hospitals in the area
Every wall-cutting job begins with a structural assessment. We never cut a load-bearing element without the project's engineer or your structural consultant signing off on the scope.
Concrete Floor Slab Cutting
Bathroom renovations, kitchen plumbing upgrades, and in-slab drainage rerouting all require controlled slab opening. Our floor saws cut through RCC floor slabs with minimal kerf width and no impact cracking — meaning your renovation contractor can do their work without having to re-plaster a large area around the opening.
Anchor and Dowel Hole Drilling
For attaching mezzanine structures, signage frames, overhead equipment, canopy supports, or facade panels to concrete surfaces — we drill accurately positioned anchor bolt holes to your structural engineer's specifications.
Exhaust and Industrial Duct Drilling
For commercial kitchens, restaurants, gyms, and small manufacturing units in the Jhandewalan and Rani Jhansi Road commercial zone, large-diameter exhaust and duct holes (200mm–600mm) are a specialty we handle frequently. These require powerful core rigs and the right bit size — we carry them all.
Why Contractors and Building Owners in Jhandewalan Call Us First
We Understand Central Delhi Construction
Jhandewalan buildings are not all the same. Some are old load-bearing brick constructions from the 1950s–70s. Others are RCC frame structures from the 1990s. And then there are the new commercial and mixed-use buildings going up near Jhandewalan Extension and the Paharganj–Karol Bagh corridor. Each demands a different drilling approach — and our teams have worked across all of them.
Rapid Response for a Busy Commercial Zone
Jhandewalan is not a quiet residential suburb — it is an active commercial and transit hub. Our scheduling system prioritises time-sensitive jobs in high-traffic commercial areas. We offer early morning slots (before 9am) and after-hours drilling for sites where daytime work would disrupt business operations.
Equipment That Handles Every Surface
We carry multiple rig sizes — from compact, wall-mounted units ideal for tight spaces in old Jhandewalan shop corridors, to large floor-standing rigs for deep-penetration industrial drilling. One call books the right setup for your site.
Fixed, Written Quotes — No On-Site Surprises
In a commercial area where time is money, you cannot afford last-minute cost escalations. We give you a firm written quote based on your described scope. Final billing matches the quote unless you add scope during the job.
Honest Pricing for Core Cutting in Jhandewalan (2024–25)
| Service |
Starting Rate |
| AC Pipe Hole Drilling (50–75mm) |
₹500 – ₹900 per hole |
| Plumbing / Drain Pipe Hole (100–150mm) |
₹900 – ₹1,800 per hole |
| Exhaust / Duct Hole (200–400mm) |
₹2,000 – ₹4,500 per hole |
| Large Industrial Duct (500–600mm+) |
Custom quote |
| Wall Cutting (door/window opening) |
₹250 – ₹600 per running foot |
| Slab / Floor Cutting |
₹300 – ₹700 per running foot |
| Anchor / Dowel Hole Drilling |
₹400 – ₹900 per hole |
Note: Rates vary based on wall/slab thickness, RCC reinforcement density, floor level, and site access conditions. Commercial-volume jobs and bulk residential society orders attract discounted rates. For the most accurate quote, call or WhatsApp us with your job details.
Localities Near Jhandewalan Where We Actively Work
Our core cutting teams in Central and West Delhi cover Jhandewalan and all its surrounding localities:
- Jhandewalan — Primary Service Zone
- Rani Jhansi Road and Jhandewalan Extension
- Karol Bagh (all sectors and blocks)
- Pusa Road and Rajendra Place
- DB Gupta Road and Ramji Das Market area
- Paharganj (Main Bazar and surrounding lanes)
- Desh Bandhu Gupta Road corridor
- Sadar Bazar
- New Rohtak Road
- Ranjit Nagar and Patel Nagar
- Shadipur
- Inderpuri
- Moti Nagar
We also serve clients across a wider Delhi footprint — explore our dedicated service pages for:
Our On-Site Process: From Your Call to a Clean, Ready Opening
Enquiry — Instant Estimate Call or WhatsApp 7009679903. Tell us what you need: hole count, approximate diameter, wall type (brick or RCC), and your Jhandewalan address. We give you a price range on the spot. For complex jobs, we may ask for a photo.
Site Survey (For Wall Cuts and Slab Work) For any job involving wall cutting or slab opening, we visit your site — free of charge — to confirm dimensions, check structural context, and identify any embedded conduits or reinforcement that needs special attention.
Confirmed Booking and Arrival We confirm date, time, and crew size. Our teams have no record of no-shows or significant delays in the Jhandewalan area — punctuality is a core operating standard.
Drilling and Cutting Equipment is set up, the cut position is marked and confirmed with you, and work begins. Water cooling keeps dust suppressed. For commercial sites with operating businesses nearby, we minimise noise transmission using equipment positioning and controlled feed rates.
Site Handover We remove all equipment, collect slurry and debris, wipe down the immediate work area, and hand over the site with the opening ready for your next contractor to step in.
The Technology Behind Every Cut We Make
Variable-Speed Diamond Core Rigs
Our rigs allow the operator to dial in exact RPM for the material being drilled — slow and powerful for thick RCC columns, faster for brick partitions. This protects both the bit and the structure.
Laser-Welded Diamond Segment Bits
We do not use cheap brazed or pressed-powder bits. Our diamond segments are laser-welded to high-grade steel barrels, giving a faster, cleaner cut with significantly longer bit life and better hole finish quality.
Track-Guided Wall Saws
For any linear cut — doorway, window, or passage openings — we use track-mounted wall saws that run on a fixed rail. This ensures the cut line stays perfectly straight and plumb regardless of wall surface variation.
Water Slurry Management System
We carry portable water supply tanks and slurry collection trays for sites in Jhandewalan's older buildings where tap water access near the work area is limited. No job gets delayed for lack of cooling water.
Rebar Detection (Pre-Scan Option)
For newer RCC structures in the Jhandewalan commercial belt where post-tensioned slabs or high-density reinforcement might be present, we recommend a rebar and conduit pre-scan before cutting begins. This eliminates the risk of cutting through structural tendons or live cables — ask us about this add-on when booking.
Who Calls Us in Jhandewalan? Real Use Cases
Shop Renovation and Fit-Out Teams Commercial strips along Rani Jhansi Road and DB Gupta Road see constant churn — new shops, refits, and format changes. New AC installations, exhaust duct openings, and signage anchor drilling are bread-and-butter jobs we handle every week in this zone.
Residential Society Committees Housing societies in the Jhandewalan and Karol Bagh residential pockets often need bulk AC drilling for multiple flats at once, or slab cutting for common area drainage upgrades. We handle society-level bulk orders with a single point of contact and consistent crew.
Interior Designers and Architecture Firms Design professionals working on high-spec residential projects in Central Delhi specify diamond core cutting because they cannot risk jagged or cracked surfaces near their finish work. We work comfortably alongside interior fit-out teams.
MEP and HVAC Contractors Mechanical, electrical, and plumbing contractors working on commercial builds near Jhandewalan Extension and Rajendra Place engage us for all their core drilling — typically placed in our schedule on a recurring project basis.
Healthcare and Diagnostic Centres Several clinics and diagnostic centres operate in the Jhandewalan–Karol Bagh belt. Medical gas pipeline installations, fire suppression system pipe runs, and HVAC duct penetrations require precision and cleanliness that only diamond drilling provides.
Safety: What We Check Before Every Single Cut in Jhandewalan
Old Central Delhi buildings carry surprises — conduit runs that were never documented, water supply pipes embedded in walls, electrical wiring that runs through unexpected paths. Our pre-cut checklist addresses every risk:
Electrical Hazard Check We visually inspect and coordinate with the site electrician to map all known electrical conduit paths in the cutting zone. For commercial sites with complex wiring, we ask for an electrical drawing if available.
Water and Gas Line Confirmation We check with building maintenance or the site plumber to confirm no active water supply or gas pipes run through the planned cut path.
Structural Load Assessment For any wall-cutting job — particularly in Jhandewalan's older load-bearing structures — we require confirmation from a structural engineer or site supervisor that the intended opening can be safely made, with any required propping or shoring in place before we begin.
Slurry Containment We lay down protective sheeting around the drilling area to prevent water and slurry from flowing to lower floors or into electrical boards.
PPE for All Personnel Helmets, safety glasses, ear protection, dust masks, cut-resistant gloves, and steel-toed boots — mandatory for every team member on every Jhandewalan site, no exceptions.
Frequently Asked Questions — Core Cutting in Jhandewalan
1. What is the price of core cutting services in Jhandewalan?
Core cutting in Jhandewalan starts from ₹500 per hole for a 50–75mm AC pipe hole in a brick wall. For RCC walls of the same diameter, expect ₹700–₹900 per hole. Larger holes for exhaust ducts (200–400mm) range from ₹2,000 to ₹4,500. Wall cutting for a new doorway starts around ₹250 per running foot. Contact us on 7009679903 for a quote tailored to your specific job.
2. Can you work on old buildings in Jhandewalan that have lime-mortar brick construction?
Yes. Diamond core bits cut through old lime-mortar brickwork as effectively as they cut through modern concrete. Old brick construction is actually softer than RCC and typically drills faster. We adjust our rig speed accordingly and take care around lime mortar joints to avoid crumbling at the hole edges.
3. Do you offer core cutting services for commercial shops and showrooms in Jhandewalan?
Absolutely. Commercial shopfront drilling — for ACs, exhaust fans, CCTV, signage anchors, and cable routing — is among our most frequent job types in the Jhandewalan–Rani Jhansi Road zone. We offer early morning slots so work is complete before your business opens.
4. How long does it take to drill an AC pipe hole in Jhandewalan?
A single AC pipe hole (65–75mm diameter) through a standard 230mm brick wall takes approximately 10–20 minutes of actual drilling time. Setup and cleanup add another 15–20 minutes. For a set of 4–6 holes across a flat, the total job time is typically 2–3 hours.
5. What is the difference between core cutting and jackhammering for making wall openings?
Core cutting uses a rotating diamond-segment bit that slices through material cleanly, producing no vibration and minimal dust. Jackhammering uses impact force, creates large amounts of dust and noise, causes micro-cracking in the surrounding structure, and leaves rough, irregular edges. Core cutting is superior in every measurable way — cleaner finish, safer for the structure, quieter, and faster on RCC.
6. Can core cutting be done in an occupied building or busy commercial area?
Yes. This is one of the primary advantages of diamond core cutting. The noise level is equivalent to a standard power drill — far less than a jackhammer or chisel. Dust is suppressed by water cooling. Most commercial jobs in occupied Jhandewalan buildings proceed without disrupting adjacent tenants or customers.
7. Do you provide core cutting for high floors in multi-storey buildings near Jhandewalan?
Yes. We are equipped for high-floor drilling — our teams carry equipment to upper floors and manage all water supply and slurry containment requirements at height. There is typically a small surcharge for floors above the 4th level, which we include transparently in your quote.
8. What should I do to prepare my site before the core cutting team arrives?
Clear the immediate area around the planned cut point — move furniture, curtains, or stored goods at least 1 metre away. Ensure someone on site can point out any known electrical switch boxes, pipe runs, or conduit paths in the wall. A water tap accessible near the work area is helpful, though our team carries their own water supply if needed.
What Our Jhandewalan and Central Delhi Clients Say
"We have a shoe showroom on Rani Jhansi Road and needed 3 large exhaust duct holes cut through our 300mm RCC back wall. Two other contractors said the job was 'complicated.' Core Cutting India came, assessed in 5 minutes, and finished all three holes the next morning before we opened. Brilliant work." — Ajay Bhatia, Rani Jhansi Road
"Got 8 AC holes done across my house in Karol Bagh. The team was careful with our new flooring and freshly painted walls. Not a single scratch outside the cut area. Genuinely impressed." — Neelam Verma, Karol Bagh
"Our clinic needed medical gas pipe holes through thick RCC walls. I was nervous about damage to our interior finish. The team was professional, used protective covering, and the holes were exactly where we marked. Highly recommended for sensitive sites." — Dr. Arvind Nair, Jhandewalan Extension
Get Your Core Cutting Job Done in Jhandewalan — Book Now
You now know what professional core cutting looks like, what it costs, and what makes it far superior to the old chisel-and-hammer approach. The next step is simple — reach out, share your requirement, and get a fixed quote within minutes.
We work with homeowners, shop owners, interior contractors, MEP firms, and housing society committees across Jhandewalan, Karol Bagh, Paharganj, Rani Jhansi Road, Rajendra Place, and all of Central and West Delhi.
One call. One visit. One clean, precise cut — every time.
Core Cutting India — Precision Diamond Drilling in Jhandewalan and Across Delhi.
We also serve clients in Dwarka, Janakpuri, and Lajpat Nagar — click to explore those service pages.
