Keshav Puram is a neighbourhood of many faces. Family homes and builder floors line the colony lanes. Shops, clinics and offices crowd the main roads near the metro. A little further, small workshops and trading units keep the industrial side busy.
Because the area is so mixed, roof jobs here come in all shapes. One owner wants a staircase to the terrace. Another needs a lift. A shopkeeper wants a skylight, and a workshop owner wants an exhaust. Whatever the plan, the roof has to be opened carefully.
If you are looking for a reliable roof cutting service in Keshav Puram, Core Cutting India is here to help. We use diamond cutting tools that follow your marked lines through concrete and steel. The cut is straight, the vibration is low and the dust is controlled with water.
Call or WhatsApp 7009679903 and send a photo of your roof. We will tell you what is possible and what it may cost.
Start Here: Which Describes You?
Different owners have different needs. Find yourself below and jump to the right idea.
I Am a Homeowner
You want a terrace staircase, a lift for elders or a skylight for a dark stairwell. Your priority is a clean, quiet job that does not harm your interiors or upset the neighbours.
I Own a Shop or Showroom
You want a goods hatch, a wider staircase or a mezzanine. Your priority is minimum disturbance to customers and stock.
I Run a Workshop or Small Unit
You need an exhaust opening, a hatch for material or a lift. Your priority is short downtime and protection for machines.
I Am a Landlord
You have a leaking or cracked slab. Your priority is a targeted repair that does not disturb tenants too much.
I Am a Builder or Contractor
You need several precise openings in a fixed time. Your priority is accuracy, speed and a team that follows drawings.
Whichever group you belong to, our process is the same: inspect, plan, protect, cut and clean.
What is roof cutting? It is the removal of a marked section of a concrete roof or slab using diamond blades, wire or drills, instead of breaking it by hand.
What is the usual cost in Keshav Puram? Often from about ₹80 to ₹200 per running foot, depending on slab thickness, steel and access. Try the Rate Calculator for a quick idea.
How long does it take? A few hours to a day for most small openings.
Is it safe for old buildings? Yes, when planned properly. Diamond cutting is far gentler than breaking.
Why Keshav Puram Needs Careful Roof Cutting
Keshav Puram lies in North-West Delhi, close to Lawrence Road, Shalimar Bagh, Tri Nagar, Ashok Vihar, Haiderpur, Wazirpur and Netaji Subhash Place. The Keshav Puram metro station keeps the area well connected and busy.
For roof work, this has some clear effects:
- Mixed buildings. Homes, shops and workshops often share the same structure.
- Tight plots. Many buildings are built close together.
- Busy roads. Equipment access and parking need planning.
- Heavy daytime activity. Noise and dust must be controlled.
- Older buildings with additions. Slab design and steel layout can vary.
- Neighbour sensitivity. In close-knit lanes, complaints travel fast.
A plan that works for a quiet colony may not suit a busy market lane. That is why we inspect each site before suggesting a method.
Roof Cutting Services in Keshav Puram
Terrace Staircase Opening
We cut a clean opening so you can add a staircase to your terrace or new floor.
Lift Shaft Opening
For home lifts, goods lifts and small passenger lifts, we cut straight openings as per the supplier's drawing.
Skylight and Light-Well Cutting
Let in natural light and fresh air through a properly planned roof opening.
Duct and Exhaust Opening
For kitchens, clinics, workshops and small factories.
Goods Hatch and Mezzanine Opening
Move material between floors, or connect two levels with a new staircase.
Slab Repair and Damaged Portion Removal
We remove only the cracked or leaking part and keep the rest intact.
Wall Cutting
Straight, clean openings for doors, windows and shutters.
Core Drilling
For small round holes, see our related local pages for Adarsh Nagar, Naraina and New Delhi.
Cutting Words Made Easy: A Short Glossary
New to roof cutting? These simple terms will help you talk to any contractor.
| Term |
Meaning |
| RCC |
Reinforced cement concrete, concrete with steel bars inside |
| Slab |
The flat concrete floor or roof of a building |
| Running foot |
A one-foot length of cut line, used to measure cutting work |
| Core cutting |
Making round holes with a hollow diamond bit |
| Wall saw |
A rail-mounted saw for straight, long cuts |
| Wire saw |
A diamond wire loop for thick or awkward concrete |
| Slurry |
The wet waste made when water mixes with concrete dust |
| Propping |
Temporary supports placed under the slab during work |
Knowing these terms makes quotes easier to compare.
Which Tool for Which Slab?
| Slab Situation |
Tool We Usually Suggest |
Why |
| Standard home slab, easy access |
Ring saw or wall saw |
Quick, clean cuts |
| Narrow stairs, small rooms |
Ring saw plus core drill |
Easy to carry and use |
| Long straight opening |
Wall saw |
Accurate lines |
| Very thick commercial slab |
Wire saw or wall saw |
Handles heavy concrete |
| Round holes for pipes |
Core drill |
Clean, round openings |
| Corners of large openings |
Core drill plus saw |
Prevents over-cutting |
Technology That Keeps the Work Clean
- Diamond segments cut through concrete and steel without hammering.
- Guide rails keep the cut line straight and square.
- Water cooling protects the blade and holds the dust down.
- Slurry collection keeps floors and rooms cleaner.
- Compact machines can be carried up narrow stairs.
Benefit for you: neat edges, less finishing work and a calmer worksite.
Cutting vs Breaking: A Straight Comparison
| Point |
Diamond Cutting |
Hammer Breaking |
| Accuracy |
High |
Low |
| Vibration |
Low |
Very high |
| Dust |
Controlled |
Heavy |
| Risk to nearby walls |
Low |
High |
| Noise |
Moderate |
Very loud |
| Repair after job |
Little |
A lot |
| Neighbour complaints |
Few |
Many |
For any building in a close-knit area, the choice is clear.
How We Work: Our 10-Step Process
Step 1: Contact. Call or WhatsApp us with photos, location and opening size.
Step 2: Early advice. We share a likely method and price range.
Step 3: Site inspection. We check slab thickness, beams, steel direction and access.
Step 4: Quote. You receive a clear price and time estimate.
Step 5: Marking. We mark cut lines on the slab. You confirm.
Step 6: Preparation. We cover floors and stock, arrange water and place supports if needed.
Step 7: Cutting. The slab is cut in planned sections.
Step 8: Lowering. Heavy pieces are brought down safely.
Step 9: Cleaning. We clear slurry and debris.
Step 10: Handover. You get a clean, accurate opening, ready for your next stage.
Safety Measures We Follow
- We check slab, beam and load path before cutting.
- We use temporary supports where the structure needs them.
- We keep the area below the cut clear.
- Operators wear helmets, gloves, safety glasses and ear protection.
- Electrical equipment is kept away from water.
- Heavy pieces are cut into smaller blocks before lowering.
- Floors, stock and belongings are covered.
- Neighbours and tenants are informed in advance.
Engineer's note: For work involving columns, main beams or load-bearing walls, please consult a structural engineer. We follow your engineer's drawings and instructions.
Roof Cutting Cost in Keshav Puram
Every roof is different, so prices vary. These are the main factors:
- Slab thickness
- Steel quantity
- Total running feet of cutting
- Floor level and access
- Cutting method
- Debris removal
- Working hours and urgency
Indicative Rate Guide
| Service |
Approximate Starting Range |
| RCC roof and slab cutting |
₹80 to ₹200 per running foot |
| Wall cutting |
₹60 to ₹150 per running foot |
| Core drilling |
₹300 to ₹1,500 per hole (size and depth dependent) |
| Small jobs |
A minimum charge may apply |
These figures are for guidance only. The final quote is confirmed after a site visit.
A Quick Budget Example
Suppose you want a staircase opening of 9 feet by 3 feet. The total cut length is 24 running feet. If your slab and access lead to a rate of about ₹110 per running foot, the cutting cost would be roughly ₹2,640. Extras like debris removal or difficult access may change this. This is only an example, not a fixed price.
Want your own estimate? Use our Rate Calculator and then WhatsApp us for the exact figure.
Tips to Save Money
- Send clear photos and measurements.
- Combine roof, wall and core work in one visit.
- Keep the working area ready.
- Arrange water and power in advance.
- Book a few days ahead.
Timing Your Roof Cutting: Season Tips for Delhi
Summer (April to June): Start early in the morning. Water-cooled cutting also helps with heat and dust.
Monsoon (July to September): Plan carefully. An open roof can let in rainwater, so keep covers ready or choose a dry spell.
Winter (November to February): A comfortable season for planned work. Foggy mornings may affect timings, so confirm your schedule with us.
Real Use Cases Around Keshav Puram
A family adding a terrace staircase. They turn an unused roof into useful space.
A shopkeeper creating a goods hatch. Stock moves between floors without crowding the stairs.
A workshop owner installing an exhaust. Heat and fumes are reduced.
A landlord repairing seepage. Only the damaged section is removed and rebuilt.
A clinic adding a lift. Patients and elders reach the upper floor easily.
A contractor finishing a renovation. Multiple openings are completed in one visit.
Common Mistakes to Avoid
- Cutting without checking beam positions.
- Hiring labour that only knows breaking.
- Skipping the marking approval.
- Ignoring tenants and neighbours.
- Leaving the opening uncovered during rain.
- Choosing only on the lowest quote.
Where We Serve Near Keshav Puram
We offer roof cutting in Keshav Puram and across North and North-West Delhi:
- Keshav Puram and Lawrence Road
- Shalimar Bagh and Tri Nagar
- Ashok Vihar and Haiderpur
- Wazirpur and Netaji Subhash Place
- Pitampura and Saraswati Vihar
- Shakurpur and Madhuban Chowk
- Rohini and Model Town
- Adarsh Nagar: see our page
- Naraina: see our page
- New Delhi: see our page
Other Cities We Serve
We also provide concrete cutting and core cutting in Noida, Greater Noida, Ghaziabad, Faridabad, Gurugram, Chandigarh, Ludhiana and Jaipur. Share your city, and we will confirm availability.
Why Choose Core Cutting India
- Clear and honest pricing
- Inspection before final quote
- Modern diamond equipment
- Trained operators
- Low-dust, low-vibration method
- Respect for neighbours and property
- Quick response on call, WhatsApp and email
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Keshav Puram?
Roof cutting in Keshav Puram usually starts from about ₹80 to ₹200 per running foot. The final price depends on slab thickness, steel, access and the cutting method. Use our online Rate Calculator or WhatsApp us for a quote.
2. Is roof cutting safe for an older building?
Yes, when planned properly. Diamond cutting causes much less vibration than breaking. We inspect the slab, use supports when needed and suggest a structural engineer's advice for major changes.
3. How long does roof cutting take?
A small staircase or duct opening often takes a few hours to a day. Larger openings or thicker slabs take longer. We give a time estimate after the site visit.
4. Will cutting make a lot of noise and dust?
Machines make some noise, but far less than hammering. Water-cooled cutting keeps dust low, and we clean the area after the job.
5. Do you serve Shalimar Bagh, Tri Nagar and Ashok Vihar?
Yes. Besides Keshav Puram, we serve Shalimar Bagh, Tri Nagar, Ashok Vihar, Haiderpur, Wazirpur, Pitampura and other nearby areas.
6. What is the difference between roof cutting and core cutting?
Roof cutting removes larger slab sections for stairs, lifts or skylights. Core cutting makes small round holes for pipes and cables. We provide both.
7. How do I book roof cutting service in Keshav Puram?
Call or WhatsApp 7009679903, send photos and the opening size, and we will arrange a visit. You can also email [email protected].
8. Do you work in cities other than Delhi?
Yes. We serve Noida, Ghaziabad, Faridabad, Gurugram, Chandigarh, Ludhiana, Jaipur and more on request.
Conclusion: Choose a Roof Cutting Service in Keshav Puram That Fits Your Building
A roof opening should be exact, safe and clean. In a mixed neighbourhood like Keshav Puram, where homes, shops and workshops live side by side, that takes careful planning. The right roof cutting service in Keshav Puram gives you accuracy, low disturbance and a fair price.
Core Cutting India brings inspection-first planning, modern diamond cutting and clear communication to every job. Whether you need a terrace staircase, a lift opening, a skylight, an exhaust cut or a slab repair, we are ready to help.
Contact Us Today
Send a photo of your roof on WhatsApp now and get a clear, no-pressure quote for roof cutting in Keshav Puram.
