Model Town is not like a new township. Many homes here are older kothis, three-storey builder floors and shared-wall buildings that have stood for decades. When you want to change something on the roof, like adding a staircase, fitting a lift or opening a skylight, you cannot afford a rough job.
That is where a skilled roof cutting service in Model Town makes the difference. At Core Cutting India, we cut RCC roofs and slabs using diamond tools that slice through concrete and steel in a controlled way. The result is a clean opening, minimum shaking and far less damage to the rest of your house.
Talk to us today. Site visit and quote are free.
📞 Call: 7009679903 💬 WhatsApp: Send your photos and measurements ✉️ Email: [email protected]
What Does a Roof Cutting Service Do?
A roof cutting service removes a planned portion of a concrete roof or slab using diamond saws or core drills. It is used to create openings for staircases, lifts, skylights, pipes and ducts. Because the cut is machine-guided, the edges stay straight and the surrounding structure stays protected.
Why Roof Cutting Needs Extra Care in Model Town
Every area has its own building style. In Model Town, a few things make careful cutting especially important:
- Older buildings: Many structures here are 30 to 50 years old. Their concrete and steel behave differently from new construction.
- Shared and adjoining walls: Heavy vibration from breaking can travel to neighbouring properties.
- Narrow lanes in parts of the area: Moving heavy machines and debris needs planning.
- Families living on site: Most owners continue to stay while work is done, so dust and noise must stay under control.
- Growing families: Many owners now add a second staircase, a lift or a new terrace room.
A good contractor understands all this before the first cut is made.
Our Roof and Slab Cutting Services in Model Town
1. Staircase Opening in RCC Roof
You want a stair to reach the terrace or a new floor. We cut the opening in the exact size and position you need, so your mason can start building straight away.
2. Lift Shaft Slab Cutting
Elderly parents at home? Lift installation is now common in Model Town houses. We make the shaft openings in slabs with precise measurements.
3. Skylight and Ventilation Openings
Dark rooms, dull kitchens and stuffy staircases can be improved by opening part of the roof for light and air.
4. Terrace Access and Door Openings
We cut access points to your terrace from stairs or upper rooms.
5. Pipe, Duct and Cable Openings
For plumbing, AC ducts, drainage, solar cables and electrical lines, we make neat holes of the required size.
6. Core Cutting for Round Holes
Small round holes, from a few inches to larger diameters, are made with core drilling machines and diamond bits.
7. Partial Slab Removal
If you are redesigning a floor or removing a section of the roof, we cut it into blocks that can be lifted out safely.
8. Wire Saw Cutting for Thick or Tricky Slabs
For heavy slabs and spots where a normal saw cannot reach, a diamond wire saw is the best tool.
Our Working Method: From First Call to Clean Handover
We follow a simple five-stage method on every job.
Stage 1: Call and Share Details
Call or WhatsApp 7009679903. Tell us what you want to build. Photos of the roof and approximate size help us give a rough idea quickly.
Stage 2: Free Site Inspection
Our team comes to your Model Town property, checks slab thickness, looks at the layout, and asks about your plan. We also note access routes for machines and debris.
Stage 3: Written Quote
You receive a clear price based on the work. No vague numbers and no surprise add-ons.
Stage 4: Cutting Day
We set up water cooling, protect the area, mark the lines with your approval and begin cutting. Cut blocks are secured and removed carefully.
Stage 5: Cleaning and Final Check
We clear the work area, check the edges and hand over the opening for your next construction step.
Tools and Technology Behind Our Work
You do not need to know machine names, but it helps to know what is being used on your roof.
| Equipment |
Where It Is Used |
| Diamond wire saw |
Thick slabs, large openings, limited-access spots |
| Slab saw / floor saw |
Long, straight cuts on flat roofs |
| Wall saw |
Vertical or precision cuts |
| Core drilling machine |
Round holes for pipes and ducts |
| Water cooling system |
Dust control and blade protection |
| Diamond blades |
Cutting concrete and reinforcement steel together |
Diamond tools do not crush concrete. They grind through it in a straight line. That is why the edges stay smooth and the nearby structure stays safe.
Roof Cutting Cost in Model Town
"How much will it cost?" is the first question most people ask. Here is a fair, honest answer.
What Decides the Price?
- Thickness of the slab: More depth means more cutting time
- Amount of steel inside: Dense reinforcement slows the work
- Area or length to be cut: Bigger openings cost more in total
- Machine type needed: Wire saw jobs usually cost more than simple slab saw jobs
- Access and height: Upper floors and tight spaces need extra effort
- Debris removal: Whether you want us to take away the waste
Approximate Rates (Model Town and North Delhi)
| Type of Work |
Starting Price Guide |
| RCC roof / slab cutting |
About ₹80 – ₹150 per sq ft |
| Staircase or lift opening |
Quote after site visit |
| Core cutting |
Per hole, based on diameter and depth |
| Wire saw cutting |
Per running foot or per job |
Prices are indicative and may change after we inspect the site. Small jobs may have a minimum charge.
Get a Quick Estimate
Try our free tool: Core Cutting Rate Calculator. For the most accurate price, send us photos and measurements on WhatsApp at 7009679903.
Why Machine Cutting Beats Manual Breaking
Some contractors still use heavy breakers and hammers. For an older area like Model Town, this is risky.
Problems with manual breaking:
- Strong vibrations can cause cracks in walls and beams
- Edges become rough and uneven
- Dust and noise are much higher
- Steel and concrete you wish to keep can get damaged
- More repair and plaster work is needed later
Benefits of machine cutting:
- Straight, clean edges that need less finishing
- Controlled cutting that protects nearby structure
- Lower dust with water-cooled blades
- Faster completion for planned openings
- Better value overall because rework is reduced
Safety Standards We Follow
A roof is part of your building's structure. We never treat cutting as just a cosmetic task.
- Engineer advice for big openings: If your plan affects beams, columns or load paths, we recommend consulting a structural engineer first.
- Temporary props: We support the surrounding slab where needed.
- Skilled operators: Our machine handlers are trained for slab work.
- Personal protective gear: Helmets, gloves, goggles, masks and ear protection.
- Safe electrical setup: Proper earthing and water-safe machine handling.
- Controlled block removal: Pieces are tied and lowered, not dropped.
- Area protection: Floors, furniture and nearby rooms are covered when required.
Where Roof Cutting Is Commonly Used
Here are real-life situations in which Model Town residents usually need our service:
- Adding a new staircase to use the terrace as living space
- Fitting a lift in an older house for elders
- Making a skylight above a dark staircase or room
- Installing a rooftop water tank or solar system with pipe and cable openings
- Merging two floors by removing part of a slab
- Opening a terrace door from an upper room
- Shop and office renovation in commercial buildings near busy markets
- Redevelopment of old kothis into modern builder floors
Areas We Cover Near Model Town
Our team serves Model Town and its neighbourhood, including:
- Model Town Phase 1, 2 and 3
- GTB Nagar
- Kamla Nagar
- Mukherjee Nagar
- Adarsh Nagar
- Azadpur
- Ashok Vihar
- Shalimar Bagh
- Civil Lines
- Burari and Jahangirpuri
Not sure whether we reach your lane? Call 7009679903 and we will confirm.
Our Other Delhi Locations
We also provide cutting services in other parts of Delhi. You can view our nearby pages here:
Services in Other Cities
Beyond Delhi, we take up projects in Noida, Gurugram, Ghaziabad, Faridabad and other cities on request. Contact us with your location and requirement.
What Makes Core Cutting India a Reliable Choice?
- Focused expertise: Concrete cutting is what we do every day
- Modern diamond equipment: For accurate, clean results
- Honest quotes: You know the price before work begins
- Free inspection: No pressure and no obligation
- Care for your home: We respect your property and your neighbours
- Respect for time: Work is planned to finish as scheduled
- Easy communication: Talk to us in Hindi or English by call or WhatsApp
- Practical guidance: We tell you what is possible and what is not
Checklist Before You Hire a Roof Cutting Contractor
Use this list when comparing options:
- [ ] Do they visit the site before giving a price?
- [ ] Do they use diamond machines, not hammers?
- [ ] Is the quote clear and written?
- [ ] Will they use water to control dust?
- [ ] Do they mention safety and structural advice?
- [ ] Can they explain the time needed?
- [ ] Are debris and cleanup discussed?
A contractor who answers all of these confidently is a good sign.
Simple Preparation Tips for Homeowners
- Remove furniture and valuables from the area below the cutting zone
- Keep water and electricity points ready
- Keep drawings or marked measurements handy
- Tell neighbours about the work day
- Decide where the cut debris can be stored or removed
- Check with your engineer or local authority if your plan needs approval
Frequently Asked Questions (FAQs)
How much does roof cutting service in Model Town cost?
Roof cutting in Model Town generally starts at around ₹80 to ₹150 per sq ft for standard RCC slabs. The final price depends on slab thickness, steel density, opening size and access. Call 7009679903 or use our rate calculator for an estimate.
Is it safe to cut the roof of an old house?
Yes, if it is done with proper machines and planning. Diamond cutting causes far less vibration than hammering. For older buildings, we advise taking a structural engineer's opinion for large openings.
How long does a staircase opening take?
A standard staircase opening in a residential roof is often finished within a few hours to one day. Thicker slabs or complex cuts may take longer. We confirm the timeline after inspection.
Will the cutting damage my neighbour's property?
Machine cutting keeps vibration low, which greatly reduces the risk to adjoining walls. We also plan each cut to protect the nearby structure.
Do you provide roof cutting near me in North Delhi?
Yes. We serve Model Town, GTB Nagar, Kamla Nagar, Ashok Vihar, Shalimar Bagh, Burari and nearby areas. Call or WhatsApp 7009679903 to book a visit.
Can you cut a roof for a lift in an existing house?
Yes. We cut precise lift shaft openings in slabs. Share the lift company's drawing for the best result.
What is the difference between wire saw and slab saw cutting?
A slab saw gives long straight cuts on flat surfaces. A wire saw is better for very thick slabs, large openings or tight spaces where a normal saw cannot be placed.
How do I book roof cutting service in Model Town?
Call or WhatsApp 7009679903, share photos and measurements, and we will arrange a free site visit and a clear quote. You can also write to [email protected].
Conclusion: Choose a Safe, Clean Roof Cutting Service in Model Town
Your roof is more than a ceiling. It holds your building together. Whether you need a staircase, a lift shaft, a skylight or a simple service opening, the right roof cutting service in Model Town protects your structure, saves you repair costs and keeps your family comfortable during work.
Core Cutting India combines modern diamond tools, trained operators, honest pricing and local service across Model Town and nearby North Delhi areas.
Book Your Free Site Visit Today
📞 Call: 7009679903 💬 WhatsApp: Message us now ✉️ Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator
Call now for dependable roof cutting in Model Town with a clear, no-pressure quote.
