Najafgarh, New Delhi, Delhi 110043
- 4.5 (186)
- Verified hires
Please fill out the form to contact a specialist
Showing 5 Slab Cutting Services in Najafgarh
Najafgarh, New Delhi, Delhi 110043
Najafgarh Main Road, New Delhi, Delhi 110043
Baprola Dispensary, Najafgarh, New Delhi, Delhi – 110043, India.
Najafgarh, New Delhi, Delhi – 110043, India
Najafgarh, New Delhi, Delhi – 110043
A slab looks simple from the outside. It is a flat layer of concrete, so cutting it should be easy, right? Anyone who has seen a slab opened badly knows the truth. Cracks run to the beams, the neighbour's wall shakes, the floor below gets covered in dust, and the repair bill grows bigger than the original budget.
In Najafgarh, where homes, workshops, godowns, schools and shops stand side by side, slab work needs even more care. Every building has a different slab thickness, a different steel pattern, and a different story of how it was built.
A trained slab cutting service in Najafgarh brings order to this. At Core Cutting India, we cut RCC floor slabs and roof slabs with diamond saws, following lines that you have already approved. You get the opening you planned, and the building around it stays safe.
📞 Call or WhatsApp: 7009679903 ✉️ Email: info@corecuttingindia.com
Slab cutting is the process of cutting a planned opening or section in a concrete floor or roof slab using a diamond-blade machine. The blade cuts through concrete and steel bars together, and the cut part is lifted out in blocks.
It is also called RCC slab cutting, concrete slab sawing, floor sawing or slab opening cutting.
Many owners are not sure whether their project needs slab cutting. Here are the most common signs:
If any of these sound familiar, slab cutting is probably what you need.
Najafgarh is one of the largest and most varied areas in West and South-West Delhi. Within a few kilometres you can find:
Because of this mix, no two jobs are the same. A slab in an old village house may be thick and unevenly reinforced. A slab in a factory may carry heavy loads. A slab in a new apartment may be thin but closely packed with steel.
That is why we inspect each site before quoting and planning the cut.
The cut follows your marking exactly, so stairs, lift shafts and ducts fit as designed.
Diamond cutting is steady and controlled. It protects beams, columns and nearby walls from shock.
Water cooling keeps dust down, and machines are much quieter than breakers.
Many openings are cut in a few hours, saving days of manual labour.
Slabs are cut into blocks and lifted out, which is much tidier than breaking into small pieces.
Neat edges make finishing, railing and frame fixing simple.
Call or WhatsApp us with your address, slab type, opening size and a few photos.
Our team checks thickness, steel layout, beams, access and surrounding structure.
You receive a clear price and time estimate before we start.
We mark the cutting lines. You verify and approve.
Props are placed if needed. Floors below are protected. Water and power are arranged.
Slab saws, ring saws or wire saws cut along the lines with continuous water flow.
Blocks are separated and lifted out carefully.
Slurry is cleared and the area is left ready for the next stage.
| Machine | Best For |
|---|---|
| Walk-behind slab saw | Long, straight cuts in floors and roofs |
| Hand-held ring saw | Corners, edges and tight spots |
| Wire saw | Very thick slabs and heavy industrial concrete |
| Wall saw | Cuts where slabs meet walls or beams |
| Core drill | Round holes for pipes, cables and vents |
Diamond segments on the blade grind through concrete and steel. With constant water flow, the blade stays cool, the dust stays low, and the cut stays accurate.
A slab is part of your building's strength, so we plan every cut carefully:
Helpful advice: For large openings, old buildings or industrial floors, please involve a structural engineer. We are happy to coordinate with them to plan the best way forward.
People often search for "slab cutting rate per foot" or "slab cutting cost near me". The honest answer is that the rate depends on the job. Here are the main factors:
Indicative rate range (for planning only):
| Work Type | Approximate Cost |
|---|---|
| Slab up to 6 inch | ₹90–₹150 per running foot |
| Slab 6–10 inch | ₹150–₹300 per running foot |
| Heavy industrial or very thick slab | ₹300+ per running foot |
| Core holes | Per hole, by diameter and depth |
| Small single jobs | Minimum charge may apply |
These are starting estimates. The final price is shared after inspection.
Want a quick estimate? Use our Rate Calculator or send your measurements on WhatsApp to 7009679903.
| Point | Machine Cutting | Manual Breaking |
|---|---|---|
| Accuracy | High | Low |
| Vibration | Very low | Very high |
| Dust | Controlled | Heavy |
| Noise | Lower | Very loud |
| Edge finish | Smooth | Rough |
| Time | Short | Long |
| Risk to building | Low | High |
If you care about the safety and finish of your building, the choice is easy.
We provide slab cutting service in Najafgarh and nearby areas, including:
We also provide service in other cities across India. If you are in another part of Delhi, please visit these pages:
You can explore all our services at Core Cutting India.
Slab cutting service in Najafgarh is the professional cutting of RCC floor and roof slabs using diamond machines. It is used for stairs, lifts, ducts, machine pits and repair work without damaging the rest of the building.
Slab cutting usually starts at about ₹90 to ₹150 per running foot for slabs up to 6 inches thick. The final cost depends on thickness, steel, access and total length. Use our rate calculator or call 7009679903.
Yes. Diamond slab saws and wire saws can cut thick, heavily reinforced slabs. We inspect the structure first and plan supports if needed.
Yes, if planned properly. We check the slab, add supports where needed and cut in a safe order. For large openings in old buildings, a structural engineer's advice is recommended.
A normal staircase opening can often be finished in a few hours. Thicker slabs or larger industrial openings may take one or two days.
Not when done correctly. Diamond cutting produces very little vibration, so nearby walls and beams stay protected.
Yes. We serve Najafgarh, Nawada, Kakrola, Bakkarwala, Chhawla, Dhansa, Uttam Nagar, Dwarka and nearby areas. Call or WhatsApp 7009679903 to check availability.
Call or WhatsApp 7009679903 with your address, slab details and photos. We will arrange an inspection and send you a quote. You can also email info@corecuttingindia.com.
Whether you are adding a staircase to a family home or opening a pit in a factory floor, how the slab is cut decides the safety and finish of the whole project. A professional slab cutting service in Najafgarh gives you accurate openings, low vibration, less dust and faster results than manual breaking. Core Cutting India brings modern diamond equipment, careful planning and transparent pricing to every job, big or small.
Send us a photo and your measurements today, and we will guide you from there.
Message us on WhatsApp now and get your slab cutting quote the same day.
👉 Can't find your city? Request Slab Cutting Service now
Serving 580+ cities across India with verified professionals.