In New Delhi, a roof cutting job is rarely just about the cut. It is about timing, permissions, neighbours, security gates, finished interiors and strict site discipline. A government office, a boutique hotel, a heritage-style bungalow or a high-end office floor all expect the work to be clean, quiet and well organised.
That is the standard we follow for our roof cutting service in New Delhi.
Core Cutting India cuts RCC roofs and slabs with diamond wall saws, wire saws, ring saws and core drills. These tools remove only the section you have marked, with low vibration and controlled dust. We serve Connaught Place, Barakhamba Road, Janpath, Khan Market, Lodhi Colony, Jor Bagh, Sundar Nagar, Chanakyapuri, Moti Bagh, Kidwai Nagar, Netaji Nagar, Sarojini Nagar, Gole Market and nearby areas.
Speak to our team 📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected] 🧮 Check an estimate: Rate Calculator
Quick Answer: What Is Roof Cutting Service in New Delhi?
It is the precise cutting of RCC roofs and slabs with diamond equipment to create openings for lifts, stairs, ducts, skylights, shafts and service lines, without breaking the rest of the structure.
Typical cost: about ₹80 to ₹260 per sq ft, depending on slab thickness, steel, access, site rules and working hours. Prices in New Delhi can run higher because of controlled access and time windows. Use the rate calculator for a closer idea.
Why New Delhi Roof Cutting Is Different
Work in this part of the city comes with its own conditions:
- Controlled access: Gates, ID checks and entry passes are common.
- Limited working hours: Many sites allow cutting only at set times.
- Finished interiors: Offices, hotels and bungalows have costly finishes below the slab.
- Regulated zones: Areas under local authorities or with heritage value may need approvals.
- Neighbour sensitivity: Noise and dust complaints travel fast.
- Tight deadlines: Hotels and offices cannot stay closed for long.
A planned diamond cutting method is the best fit for all this. It is predictable, controlled and much quieter than breaking.
Permissions and Planning: Please Read This First
Before any roof or slab is cut in New Delhi, it is wise to confirm the following:
- Structural approval from your engineer for load-bearing slabs and beams
- Owner or building management consent
- RWA, association or tenant approvals where relevant
- Authority permissions if your property falls in a regulated or heritage-sensitive zone, such as parts of Lutyens' Delhi, or under local bodies like NDMC
- Entry passes and security clearance for our team and equipment
- Approved working hours and any noise limits
We follow your approved drawings and site rules. We cannot replace the permissions required, but we can help you plan the cutting side smoothly, including timing, method and site protection.
Our Roof Cutting Services in New Delhi
Lift Shaft and Lift Opening Cutting
Offices, hotels and residences use lifts more and more. We cut slab openings floor by floor for retrofits.
Staircase and Fire Stair Openings
Neat openings for internal stairs, terrace stairs and fire escape connections.
Duct, AC and Service Shaft Openings
Commercial buildings around Connaught Place, Barakhamba Road and Janpath often need openings for ducts, cables, plumbing and fire lines.
Skylight and Atrium Cutting
Bring in natural light for offices, restaurants and homes.
Slab Removal for Redesign
We cut and remove planned sections for double-height spaces, layout changes or structural upgrades.
Core Cutting in Roofs and Slabs
Round holes for pipes, drains and conduits, from small to large diameters.
Wire Saw Cutting
For heavy slabs, thick beams and areas where machine access is limited.
Types of Properties We Work With
| Property |
Common Requirement |
| Commercial offices |
Ducts, service shafts, lift openings |
| Hotels and guest houses |
Lift installation, fire stairs, service cores |
| Bungalows and large residences |
Skylights, stairs, home lifts |
| Institutional buildings |
Utility shafts, upgrade openings, pipe cores |
| Restaurants and retail |
Exhausts, ducts, internal stairs |
| Clinics and hospitals |
Service openings with low dust and noise |
How We Plan and Execute Your Job
| Step |
What We Do |
| 1. Enquiry |
You call or WhatsApp 7009679903 with size, location and photos |
| 2. Site survey |
We inspect slab, steel, access, power, water and finishes below |
| 3. Written quote |
You get a clear price before any work begins |
| 4. Planning |
We align on timing, entry rules, permissions and your engineer's marking |
| 5. Site protection |
Floors and furniture below are covered, and the area is barricaded |
| 6. Cutting |
Diamond tools with water cooling cut through concrete and steel |
| 7. Safe lowering |
Cut blocks are supported and lowered under control |
| 8. Cleanup and handover |
We clean up and check the opening with you |
The Technology Behind Our Work
Wall / slab saw: A circular diamond blade moves along a rail for long, straight cuts.
Wire saw: A diamond-coated wire cuts thick or odd-shaped sections with great flexibility.
Ring saw: Allows deeper cuts and reaches into corners.
Core drill: A hollow diamond bit makes neat round holes.
Hand flush saw: Finishes corners and edges.
Water cooling and slurry control: Reduces dust, heat and blade wear, and keeps interiors cleaner.
Benefits of Choosing Core Cutting India
- Low vibration to protect finishes, glass and nearby structure
- Dust and slurry control for occupied buildings
- Accuracy that matches your drawing
- Schedule discipline with planned working windows
- Clean edges that reduce finishing work
- Clear pricing before the work starts
- Trained, safety-equipped team
- Prompt response across Connaught Place, Lodhi Colony, Chanakyapuri and nearby areas
Roof Cutting Cost in New Delhi
The table below gives an indicative guide. These are not fixed rates.
| Type of Work |
Approximate Cost |
| RCC slab up to 6" thick |
₹80 – ₹150 per sq ft |
| RCC slab 6" to 10" thick |
₹130 – ₹260 per sq ft |
| Wire saw cutting (heavy sections) |
₹180 – ₹430 per sq ft |
| Core holes for pipes and ducts |
₹150 – ₹2,200 per hole, based on size and depth |
| Small jobs |
A minimum job charge applies |
Note: For a firm quote, use the rate calculator or call 7009679903. We confirm after a site check.
What Can Raise the Cost in New Delhi?
- Restricted hours or night work
- Security and entry formalities that slow setup
- Extra protection for finished floors and equipment
- Upper-floor access without lift
- Thick or heavily reinforced slabs
- Debris removal and transport rules
Tips to Avoid Budget Surprises
- Share drawings and photos early.
- Confirm permissions before booking.
- Decide working hours in advance.
- Clarify debris handling.
- Combine multiple openings in one schedule.
Areas We Serve in New Delhi
- Connaught Place, Barakhamba Road and Janpath
- Khan Market, Lodhi Colony and Jor Bagh
- Sundar Nagar, Nizamuddin and India Gate surroundings
- Chanakyapuri, Moti Bagh and Kidwai Nagar
- Netaji Nagar, Sarojini Nagar and Laxmibai Nagar
- Gole Market, Mandi House and Bhagwan Das Road
- Pragati Maidan, Purana Qila Road and Safdarjung Enclave side
If your location is not listed, call us. We will quickly confirm if we can serve you.
Cutting Services in Other Delhi Areas
Explore our other local pages:
Other Cities We Serve
Core Cutting India also supports concrete and wall cutting work in Gurugram, Noida, Greater Noida, Ghaziabad and Faridabad, and in other cities depending on the project. Call 7009679903 to confirm availability.
Use Cases in New Delhi
| Situation |
Example |
| Office upgrade |
Duct and cable openings on a Barakhamba Road floor |
| Hotel expansion |
Lift shaft cutting in a Connaught Place hotel |
| Residence upgrade |
Skylight in a Lodhi Colony home |
| Service shaft |
Slab opening in an institutional building |
| Restaurant fit-out |
Exhaust opening near Khan Market |
| Renovation |
Section removal for a double-height hall |
| Utilities |
Core holes for pipes and conduits |
Safety Measures We Follow
- Structural clearance: We advise approval from your engineer before cutting load-bearing slabs or beams.
- Support and propping: Sections are supported where needed.
- Barricading: The area below the cut is cleared and secured.
- Controlled lowering: Cut blocks are never dropped.
- Slurry control: Water is managed to protect floors, equipment and wiring.
- PPE: Helmets, gloves, goggles, masks and ear protection.
- Electrical safety: Earthed machines and trained operators.
- Site discipline: We follow entry rules, timings and instructions from building management.
Diamond Cutting vs Breaking
| Factor |
Diamond Cutting |
Breaking |
| Accuracy |
High |
Low |
| Vibration |
Very low |
Very high |
| Noise |
Moderate and controlled |
Very high |
| Dust |
Controlled |
Heavy |
| Risk to finishes |
Low |
High |
| Edge finish |
Straight |
Rough |
| Rework later |
Minimal |
Heavy |
For occupied offices, hotels and bungalows, controlled cutting is usually the only practical choice.
Why You Can Trust Core Cutting India (EEAT)
- Experience: We handle slab, wall and concrete cutting for homes, offices and commercial sites across Delhi NCR.
- Expertise: Tools and methods are chosen based on slab thickness, steel and site conditions.
- Authority: We work with engineers, architects and contractors, and follow their approved plans.
- Trust: Clear quotes, direct phone support and honest advice. More details at corecuttingindia.com.
Information to Share for a Faster Quote
- Property type and location
- Floor and access details
- Opening size and purpose
- Photos of the slab and the area below
- Drawings or engineer's notes
- Allowed working hours
- Entry or security requirements
Frequently Asked Questions (FAQs)
1. How much does roof cutting service cost in New Delhi?
Roof cutting in New Delhi usually costs ₹80 to ₹260 per sq ft, depending on slab thickness, steel, access, site rules and working hours. Wire saw cutting costs more. For an exact price, use corecuttingindia.com/rate-calculator or call 7009679903.
2. Is roof cutting allowed in New Delhi?
In most private buildings, yes, with owner consent and engineer approval. Properties in regulated or heritage-sensitive zones, or under bodies like NDMC, may need extra permissions. Please confirm with the relevant authority before you start.
3. How can roof cutting be done with low noise and dust?
Diamond wall saws, wire saws and core drills with water cooling are much quieter and cleaner than hammering. Floor protection and barricading further reduce the impact on occupied spaces.
4. How long does roof cutting take?
Most small to medium openings take a few hours to one day. Thick slabs, heavy steel, restricted work hours or multi-floor lift openings may take longer.
5. Do you serve Connaught Place, Lodhi Colony and Chanakyapuri?
Yes. We serve Connaught Place, Lodhi Colony, Chanakyapuri, Jor Bagh, Khan Market, Janpath, Barakhamba Road, Kidwai Nagar and nearby areas of New Delhi.
6. Can you work inside offices and hotels that stay open?
Yes. We plan the work around your timings, use wet cutting to control dust, and protect the area below. Please share your building rules in advance.
7. What is the difference between roof cutting and core cutting?
Roof cutting makes larger openings such as lift shafts, stairs and skylights. Core cutting makes small round holes for pipes, ducts or cables using a hollow diamond bit.
8. How do I book roof cutting service near me?
Call or WhatsApp 7009679903 with your location, opening size and photos. We will arrange a site visit and share a clear quote. You can also email [email protected].
Book Your Roof Cutting Service in New Delhi Today
Whether it is a lift opening in Connaught Place, a duct shaft on Barakhamba Road, a skylight in Lodhi Colony or a service opening in Chanakyapuri, Core Cutting India is ready to help. If you want a dependable roof cutting service in New Delhi with careful planning, clean cuts and clear pricing, call us today and let us plan your project properly.
Contact Us
📞 Call: 7009679903 💬 WhatsApp: Message us ✉️ Email: [email protected] 🧮 Rate Calculator: corecuttingindia.com/rate-calculator 🌐 Website: corecuttingindia.com
WhatsApp your opening size and photos for a quick estimate.
