Adding a new staircase, fitting a lift, opening up a dark room to sunlight, or making way for a pipe or duct: all of these start with one job. Someone has to cut a hole in your concrete roof, and it has to be done without harming the building.
That is where a trained roof cutting service in Tughlakabad makes the difference. At Core Cutting India, we use diamond cutting machines that slice through reinforced concrete in straight, controlled lines. There is no heavy hammering, no shaking of walls and very little dust.
We serve Tughlakabad, Tughlakabad Extension, Govindpuri, Kalkaji, Okhla, Sangam Vihar, Khanpur, Badarpur and nearby areas of South Delhi. If you are planning a roof opening, you can speak to us today and get a free site visit.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Quick price check: Rate Calculator
What Is Roof Cutting?
Roof cutting means removing a measured portion of a concrete slab using special diamond-edged saws or wire saws. The idea is to make an opening of exact size while leaving the remaining slab untouched.
Common reasons people book it:
- To build a new staircase
- To install a passenger or goods lift
- To make a skylight or light well
- To add exhaust, chimney or duct openings
- To remove a damaged part of the roof
- To place a water tank, pipe or cable line
In Tughlakabad, typical cost ranges between ₹85 and ₹250 per running foot. The exact quote depends on thickness, reinforcement and access, and we confirm it after seeing your site.
Why Tughlakabad Property Owners Choose Diamond Cutting
Tughlakabad has a wide mix of buildings. There are old family homes near the village areas, multi-storey builder floors in Tughlakabad Extension, small factories and godowns, and commercial units near the container depot and railway belts. These buildings differ in age, slab quality and design, so a one-size-fits-all approach does not work.
Here is what diamond roof cutting offers compared to traditional breaking:
| What You Care About |
Diamond Roof Cutting |
Hammer / Breaker |
| Building safety |
Very high |
Low to medium |
| Shaking and vibration |
Almost none |
Heavy |
| Edge quality |
Straight and neat |
Broken and uneven |
| Dust and mess |
Controlled with water |
Spreads widely |
| Time on finishing |
Short |
Long, needs repair |
| Neighbour complaints |
Rare |
Frequent |
For homes in crowded colonies, this difference is very important. Old walls and shared boundaries can crack when a breaker is used on the roof.
Our Roof Cutting Services in Tughlakabad
1. Staircase Opening Cutting
Whether you are adding a floor or connecting the terrace, we cut a neat rectangular opening for your staircase. Your mason can start fixing steps right away.
2. Lift Shaft Slab Cutting
Many owners in South Delhi are now installing lifts in older homes. We cut shaft openings with correct size and square corners, as per your lift vendor's drawings.
3. Skylight and Natural Light Openings
Dark middle rooms and stairwells become brighter and healthier with a properly cut skylight.
4. Ventilation and Chimney Cutting
For kitchens, workshops, small factories and restaurants, we create exhaust and chimney openings.
5. Duct, Pipe and Cable Passage Cutting
We cut round and square openings for plumbing, AC ducts, drainage and electrical lines. For small circular holes, our core cutting service in Kalkaji team also supports nearby areas.
6. Partial Slab Removal
When part of a roof is damaged, leaking or being rebuilt, we remove it in controlled blocks.
7. Industrial and Warehouse Roof Cutting
Warehouses and workshops often need openings for hoists, crane access, machine movement and ventilation. We handle thick, heavily reinforced industrial slabs.
8. Wall Cutting for New Doors and Windows
We also cut walls for doors, windows and passages with a wall saw.
How the Work Happens: From First Call to Final Cleanup
Stage 1: You Call or Message Us
Send your address, a few photos and the approximate size of the opening on 7009679903. WhatsApp is the fastest way.
Stage 2: We Visit and Inspect
Our technician checks slab thickness, the direction of steel bars, nearby beams and columns, water and power availability, and the way to bring machines inside.
Stage 3: You Get a Clear Quotation
We tell you the total cost, expected time and what is included. You can also get an early idea from our online rate calculator.
Stage 4: Site Preparation
We protect the floor below, set up supports if the span is large, arrange cooling water, and mark the cutting lines.
Stage 5: Careful Cutting
Our operator cuts along the marked lines. Large openings are split into smaller blocks so each piece is safe to handle.
Stage 6: Lowering and Clearing
Blocks are lowered with ropes, pulleys or hoists. We then clear debris and leave the site neat.
Machines and Methods That Make the Difference
We pick the tool that suits the job, not the other way round.
- Wall saw: Mounted on a track, it gives deep and perfectly straight cuts in thick slabs.
- Floor saw: Best for flat roofs where the machine can sit on the surface.
- Diamond wire saw: A flexible wire loop that cuts very thick or awkward concrete where saws cannot reach.
- Core drilling rig: Makes round holes of different diameters for pipes, cables and ducts.
- Hand-held diamond saw: Used for corners and finishing.
Every machine runs with water. The water cools the diamond blade, keeps dust down and helps the blade last longer. The result is a cleaner site and a smoother cut.
Safety Comes First: Our Site Rules
Your roof carries weight, so we treat every cut as an engineering decision, not just a cutting job.
- Study the structure first. We locate beams, columns and the slab span before marking.
- Use supports when needed. Temporary props are placed under larger openings.
- Respect load-bearing members. We do not cut main beams without engineer approval.
- Check hidden services. Electric wires, water lines and gas pipes are identified before work.
- Protect people. The area under the cut is cleared and barricaded.
- Wear proper gear. Helmets, gloves, masks, goggles and ear protection are used.
- Control slurry. Wastewater is managed so it does not flow into neighbours' homes.
If your project involves a major structural change, we recommend involving a structural engineer. We are happy to work with your architect or contractor.
Roof Cutting Cost in Tughlakabad: What to Expect
A lot of people ask, "What is the rate of roof cutting per foot?" or "How much does slab cutting cost in Delhi?" The honest answer is that it varies with the job, but here is a helpful range.
| Type of Work |
Indicative Price |
| Slab cutting up to 6 inches |
₹85 – ₹150 per running foot |
| Slab cutting 6 to 12 inches |
₹150 – ₹250 per running foot |
| Wall cutting |
₹100 – ₹200 per running foot |
| Core holes |
Priced per hole by size and depth |
| Very small jobs |
Minimum charge applies |
These are approximate rates. The final price is decided after inspection.
What Changes the Price?
- Thickness: A thicker slab needs more time and blade wear.
- Rebar density: More steel slows the cut.
- Cut length: The longer the cutting line, the higher the cost.
- Floor and access: Upper floors, tight lanes and stairs need extra effort.
- Debris removal: Carrying blocks down may need more manpower.
- Power and water: If the site lacks these, we arrange them at extra cost.
Money-Saving Tips
- Finalise the opening size before we arrive. Changes at the last minute cost time.
- Combine multiple cuts (roof, wall and core holes) into one visit.
- Keep the working area clear.
- Ask us for a written quote so there are no surprises.
You can check a rough figure now at our Rate Calculator and then message us for the final price.
Where Roof Cutting Is Used: Real-Life Examples
Homes: A family in a two-floor house wants an internal staircase. We cut a neat opening in a few hours.
Builder floors: A new owner wants a small light well in the centre of the building. We cut a clean square opening.
Small factories: A unit near the railway belt needs a goods lift between floors. We cut an exact shaft opening.
Warehouses: A storage owner needs space for a hoist. We cut the slab and give a smooth finish.
Shops and showrooms: A shop needs a mezzanine stair or duct opening. We do both without shaking the display area.
Renovation projects: A damaged section of roof is removed safely so it can be recast.
Why Local Knowledge Helps in Tughlakabad
Tughlakabad is close to the historic fort area, the railway lines, the container depot and busy roads leading to Okhla, Badarpur and Faridabad. Traffic, narrow lanes and old constructions can slow work if you do not plan properly.
Because our team works regularly across South Delhi, we know how to:
- Reach congested lanes with compact equipment
- Plan work timings to reduce disturbance
- Handle older buildings with uneven slabs
- Manage water supply where pressure is low
- Coordinate with contractors, masons and lift companies
Areas Near Tughlakabad We Cover
We offer roof cutting and concrete cutting services in:
- Tughlakabad Village and Tughlakabad Extension
- Govindpuri and Kalkaji
- Okhla Industrial Area and Okhla Phase 1 to 3
- Sangam Vihar and Khanpur
- Pul Prahladpur and Badarpur Border
- Sarita Vihar and Jasola
- Greater Kailash and Nehru Place
- Lajpat Nagar and Jangpura
Looking for core cutting in other parts of Delhi? See our local pages:
We Also Work in Other Cities
Our services are available in Faridabad, Gurugram, Noida, Greater Noida, Ghaziabad, Sonipat, Panipat, Karnal, Chandigarh, Ludhiana, Jaipur and other North Indian cities. Contact us on 7009679903 to confirm your location.
Why Choose Core Cutting India?
We bring experience. Our team has handled roof, wall and slab cutting for homes, shops and industrial units in Delhi NCR.
We use professional equipment. Diamond saws, wire saws and core drills are chosen to suit your slab.
We are honest about pricing. You hear the price before work starts, along with the reasons behind it.
We give practical advice. If your plan needs an engineer's input, we will tell you.
We respect your property. We protect floors, control dust and clean up after the job.
Quick Preparation Checklist
Before our team arrives, please:
- [ ] Decide the exact size and position of the opening
- [ ] Share your drawing or photos if available
- [ ] Confirm the slab can be cut with your engineer for large openings
- [ ] Keep water and electricity ready
- [ ] Remove furniture and valuables from below the cutting area
- [ ] Decide where the cut blocks will be kept
Voices from Our Customers
"We wanted to add stairs to our terrace. The team arrived on time, explained everything and finished neatly." – Homeowner, Tughlakabad Extension
"A small godown opening was needed for a hoist. The cut was straight and the cleanup was good." – Business owner, Okhla
(Please replace with real, verified reviews before going live.)
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Tughlakabad?
Roof cutting in Tughlakabad generally costs between ₹85 and ₹250 per running foot, depending on slab thickness, steel and site access. We give an exact quote after a free site visit.
2. Is roof cutting safe for old houses?
Yes, when diamond cutting is used. It creates very little vibration, so old walls and beams are not shaken. For big openings in old buildings, we advise taking a structural engineer's opinion.
3. How long does roof cutting take?
A normal staircase opening takes around 4 to 8 hours. Thicker slabs and large lift shafts may take one to two days.
4. Can you cut through steel reinforcement?
Yes. Our diamond blades and wire saws cut concrete and steel bars together along the marked line.
5. Will there be a lot of dust and noise?
No. We use water-cooled cutting, which reduces dust. It is also much quieter than a hammer or breaker.
6. Do you offer roof cutting near Govindpuri, Okhla and Kalkaji?
Yes. We cover Tughlakabad and nearby areas such as Govindpuri, Kalkaji, Okhla, Sangam Vihar, Khanpur and Badarpur.
7. Do I need permission for cutting my roof?
Small changes in your own house are usually allowed, but major structural work may need approval and an engineer's sign-off. Check with your local authority if you are unsure.
8. How can I book a roof cutting service in Tughlakabad?
Call or WhatsApp 7009679903, or email [email protected] with your location, photos and size of the opening. We will schedule a free site visit.
Conclusion: Book a Reliable Roof Cutting Service in Tughlakabad
A roof opening should be exact, safe and free of avoidable damage. With the right machines, trained operators and honest pricing, that is easy to achieve. Core Cutting India offers dependable roof cutting service in Tughlakabad for homes, shops, factories and warehouses, along with nearby areas of South Delhi.
From staircase and lift openings to skylights and duct routes, we plan each cut carefully and complete it neatly.
📞 Call or WhatsApp today: 7009679903
✉️ [email protected] 🌐 corecuttingindia.com 🧮 Check your estimate here
Free site visit. Clear rates. Dependable service in Tughlakabad and across Delhi NCR.
