Same-day service available in Mysuru, Vijayanagar, Gokulam, Saraswathipuram, Hebbal, and all major localities.
If you are looking for core cutting services in Mysuru that are fast, dust-free, and structurally safe, you have come to the right place. Whether it is a new air conditioner duct, a plumbing line, an electrical conduit, or a ventilation shaft — our diamond core cutting technology gets the job done without chipping or cracking your concrete.
We are local experts serving Mysuru’s residential apartments, commercial complexes, industrial sheds, and infrastructure projects. No vibrations. No jackhammers. Just clean, circular, precise holes.
Why Choose Professional Core Cutting in Mysuru?
Traditional chiseling or hammering is loud, messy, and dangerous for your structure. Professional concrete core cutting in Mysuru uses diamond-tipped cylindrical drills that rotate at high speed to cut through reinforced cement concrete (RCC) like butter.
Here is why Mysuru’s builders, engineers, and homeowners trust us:
-
Zero structural stress – No micro-cracks in beams or columns.
-
Perfectly round holes – Ideal for pipes, conduits, and ducts.
-
Low noise & no dust – Wet drilling technology available.
-
Any angle – Horizontal, vertical, or angled cuts.
-
Reinforcement friendly – Cuts through steel rebar smoothly.
Our Core Cutting Services in Mysuru
We solve real-world construction problems. Below is every type of core drilling service we offer in Mysuru.
Wall Core Cutting Service
Need a hole in an existing RCC wall for an AC pipe, exhaust fan, or water line? We cut clean holes from 20mm to 300mm diameter through any load-bearing or partition wall.
Slab Core Cutting Services
For plumbing stack pipes, electrical risers, or HVAC ducts through roof slabs or intermediate floors. Our slab core cutting services in Mysuru are used by many builders in Gokulam and Jayalakshmipuram.
Diamond Core Cutting for Beams & Columns
Structural members cannot be hacked. We use low-vibration diamond coring for MEP (Mechanical, Electrical, Plumbing) penetrations through beams and columns without affecting structural integrity.
Concrete Hole Cutting for Utility Lines
From drainage pipes to gas lines and fibre optic cables — we drill precise holes in existing foundations and retaining walls.
Industrial Core Cutting Services
Heavy-duty drilling for chemical plants, textile units, and food processing factories in Mysore Industrial Estate, Hebbal, and Belagola.
Our Simple 4-Step Core Cutting Process
We make RCC core cutting in Mysuru predictable and transparent.
-
Site Assessment – Our engineer visits your site (free for local projects) to check rebar density, concrete thickness, and access.
-
Marking & Setup – We mark the exact centre point, mount the drill rig, and connect water supply for dust suppression.
-
Diamond Drilling – The core drill rotates at 2,000–3,000 RPM, cutting a smooth cylinder. We remove the concrete core in one piece.
-
Site Cleanup – No broken concrete mess. We clear debris, sludge, and hand over a ready-to-use opening.
🕒 Most residential core cuts take less than 2 hours. Larger slab or beam work is completed within one working day.
Core Cutting Cost in Mysuru
Pricing depends on diameter of hole, thickness of concrete, steel density, and access height. Below is a realistic price range for core cutting cost in Mysuru.
💡 Minimum visit charge: ₹1,500 + GST (waived for 5+ holes).
Get exact pricing: Share your wall/slab photo on WhatsApp – 7009679903.
Prices are indicative. GST extra. Commercial projects get bulk discounts.
Where We Provide Core Cutting Services in Mysuru
We are strategically located to serve core cutting near me in Mysuru requests instantly.
-
Central Mysuru: Devaraja Mohalla, Lashkar Mohalla, Agrahara
-
North Mysuru: Vijayanagar, Hebbal, Vidyaranyapuram, Sharadadevinagar
-
South Mysuru: Udayagiri, Kuvempunagar, Jayalakshmipuram
-
East Mysuru: Gokulam, Vontikoppal, Siddharthanagar
-
West Mysuru: Saraswathipuram, Bogadi, Yadavgiri
-
Outer Areas: Srirampura, Belavadi, Hootagalli, Kadakola
We also serve nearby towns like Srirangapatna, Mandya, Nanjangud, and Bannur on prior notice.
Safety & Technology
Unlike local “drilling bhaiyas” who use impact drills, we use electro-hydraulic diamond core drilling rigs from Hilti and Husqvarna.
-
Overload protection – Auto cut-off if rebar jams.
-
Water swivel system – Zero airborne silica dust.
-
Slip clutch – Prevents kickback and injury.
-
Vacuum base & expansion anchor – No floor damage while drilling.
🏗️ We carry general liability insurance and follow OSHA-style safety protocols. Our operators wear PPE (gloves, goggles, earplugs, respirator).
Core Cutting in Mysuru Homes & Offices
Case 1 – New AC duct in an apartment (Vijayanagar)
The client needed a 65mm hole through a 9-inch RCC wall for a split AC piping. We completed it in 45 minutes without any dust on their new wallpaper.
Case 2 – Plumbing stack in a 5-storey building (Gokulam)
The builder had missed a soil pipe penetration in the slab. We cored 110mm holes in 3 slabs in one day without affecting tenants below.
Case 3 – Electrical bus duct in a factory (Hebbal Industrial Area)
We drilled 40 holes of 32mm diameter in a 450mm thick foundation wall for cable pass-through – completed in 2 shifts.
What Our Mysuru Customers Ask
Which is the best core cutting service in Mysuru?
Mysore Core Cut is widely rated as the best core cutting service in Mysuru for residential and commercial projects due to our diamond drilling technology, transparent pricing, and same-day response. We have 120+ Google reviews across Karnataka.
What is core cutting and why is it important in construction projects?
Core cutting is the process of drilling precise circular holes in RCC without hammering. It is important because it preserves structural integrity, prevents cracks, and allows clean installation of utilities like AC pipes, drain lines, and electrical conduits.
Do you provide diamond core cutting services in Mysuru?
Yes. We provide diamond core cutting services in Mysuru using industrial-grade wet diamond bits for RCC, brick, block, and even granite. Diamond cutting is the safest method for reinforced concrete.
Can RCC walls, slabs, beams, and columns be safely core cut?
Absolutely. Our RCC core cutting contractor in Mysuru uses low-vibration rigs and avoids rebar breakage. We follow structural drawings and work with your engineer if required.
What is the cost of core cutting services in Mysuru?
Cost ranges from ₹500 to ₹6,000 per hole depending on diameter, depth, and location. A standard 65mm AC duct hole in a 9-inch wall costs around ₹900–₹1,200. Call us for an exact quote.
Do you offer concrete drilling for plumbing, electrical, and HVAC installations?
Yes, 100%. Our concrete drilling services in Mysuru are specifically used by plumbers, electricians, and HVAC contractors for running pipes, wires, and ducts through hard concrete.
Is core cutting suitable for residential, commercial, and industrial buildings?
Yes. We do residential core cutting (homes, apartments), commercial core cutting (offices, showrooms, hospitals), and industrial core cutting (factories, warehouses, power plants) across Mysuru.
Can core cutting be performed without damaging the structure?
Yes. Unlike chiselling, diamond core cutting produces no impact damage, no edge spalling, and no micro-fractures. The surrounding concrete remains 100% intact.
How long does a core cutting project take to complete in Mysuru?
A single residential hole takes 30–60 minutes. A full floor with 10–15 holes takes 3–4 hours. Large industrial jobs may take 1–2 days. We work weekends and post hours.
How can I book a professional core cutting contractor in Mysuru?
You can book instantly by calling 7009679903 or sending a WhatsApp message with your site address, hole size, and photos of the wall/slab. We schedule within 24 hours.
Core Cutting Services in Other Karnataka Cities
We are not limited to Mysuru. If you need core cutting in other major cities, our team is available across the state.
We also serve Hubli, Belagavi, Kalaburagi, Shivamogga, and Tumakuru. Call us to check availability.
Frequently Asked Questions
1. Can you cut a 12-inch hole in a 15-inch thick retaining wall?
Yes. We have rigs capable of drilling up to 400mm diameter and 2000mm depth. For walls thicker than 24 inches, we use a core barrel extension.
2. Do you need water or electricity at the site?
We need access to water (for wet drilling to suppress dust) and a 15A power socket. If water is unavailable, we use vacuum dust extraction for dry drilling.
3. Will core cutting affect the rebars inside the concrete?
We avoid cutting main reinforcement bars. We use a rebar locator before drilling. If unavoidable, we seek structural approval. Stirrups (small rings) can be cut safely.
4. Is weekend service available in Mysuru?
Yes. We work on Saturdays, Sundays, and public holidays to avoid disturbing office or school hours.
5. Do you give a warranty on your core cutting work?
We provide a 30-day workmanship warranty against misalignment, improper finishing, or water leakage due to poor drilling.
6. How deep can you core cut in one pass?
Standard depth per pass is up to 24 inches (600mm). For deeper foundations, we use sectional rods and multi-pass drilling.
7. Do you handle post-drilling waterproofing?
We do not waterproof, but we recommend our partner agencies. We can seal the annular gap with non-shrink grout on request.
8. Are you registered as a contractor in Mysuru?
Yes. We are a licensed micro-enterprise under Udyam registration and a registered vendor with several Mysuru-based developers.
Get Same-Day Core Cutting in Mysuru – Call Now
Don’t wait for cracks to appear or projects to stop. Whether you are a homeowner trying to install an exhaust fan or a project manager needing 50 holes in a slab – our core cutting services in Mysuru are just one call away.
📞 Call or WhatsApp: 7009679903
📧 Email: [email protected]
📍 Service Area: Entire Mysuru urban and rural – including all zones mentioned above.
