core cutting services in Mahad that are fast, precise, and affordable? Whether you need openings for plumbing, HVAC ducts, electrical conduits, or structural modifications in RCC slabs and walls — Core Cutting India is your trusted partner in Mahad and across the Raigad district.
We use advanced diamond core drilling technology to deliver clean, dust-minimised, vibration-free cutting in concrete, brick, and stone — without causing cracks or structural damage to the surrounding area. Our team of experienced technicians has completed hundreds of projects in Mahad, Poladpur, Mangaon, Roha, Pen, and nearby industrial zones along the Mumbai-Goa Highway corridor.
📞 Call / WhatsApp: 7009679903
📧 Email: [email protected]
What Is Core Cutting? A Simple Explanation
Core cutting (also called core drilling) is a construction technique used to create precise, circular holes in concrete, RCC slabs, walls, floors, and other hard surfaces. Unlike traditional chiselling methods, core cutting uses a diamond-tipped drill bit mounted on a motorised machine to bore clean, smooth holes of any diameter — from 25mm to 600mm or larger.
This technique is widely used in:
- Plumbing pipe installation
- AC and HVAC duct openings
- Electrical conduit routing
- Structural beam and column testing
- Expansion bolt anchor points
- Water drainage and sewage line passage
Because the process is controlled and mechanical, it avoids the hammering and vibration that can weaken nearby structures — making it the preferred choice for contractors, builders, and site engineers across Mahad.
Our Core Cutting Services in Mahad
1. Diamond Core Drilling for Slabs and Floors
We drill precise circular holes through RCC slabs of any thickness — from thin 100mm roof slabs to heavy 600mm industrial floors. Common use cases include plumbing pipe inserts, drainage point creation, and anchor bolt holes for heavy equipment in Mahad's growing MIDC industrial belt.
2. Wall Core Cutting Services
Need a clean opening in a brick or concrete wall for AC piping, exhaust fans, or cable conduits? Our wall core cutting service in Mahad delivers smooth, round openings without damaging the wall's integrity or finish plaster around it.
3. RCC Column and Beam Core Drilling
For structural testing, load capacity assessments, or retrofitting projects, we drill core samples from columns and beams. These samples are used by structural engineers and testing labs to evaluate concrete strength using the compressive strength (IS 516) methodology.
4. Road and Pavement Core Drilling
Mahad's infrastructure projects, road widening works, and MIDC utility laying often require drilling into asphalt and PCC roads. Our team handles road core drilling for soil testing, utility pipe insertion, and pothole patching prep work.
5. Industrial Core Cutting – MIDC Mahad Projects
The Mahad MIDC industrial area has a high concentration of chemical plants, manufacturing units, and warehouses. We provide specialised industrial core cutting for equipment pads, drainage trenches, and machine foundation openings — compliant with industrial safety norms.
6. Water Tank and Underground Structure Drilling
Drilling into underground sumps, water tanks, septic structures, or RCC tunnels requires extra precision. We use waterproof core drilling setups with continuous water cooling to maintain bit life and deliver clean bores in wet concrete environments.
Why Choose Core Cutting India for Core Drilling in Mahad?
Here's why contractors and site engineers across Mahad prefer us over local operators:
✅ Diamond-Tipped Equipment: We use only premium diamond core bits for clean, burr-free bores — no jagged edges, no cracking.
✅ Experienced Technicians: Our trained team understands RCC structures, rebar positions, and load-bearing zones to avoid damage.
✅ Fast Mobilisation: We reach Mahad job sites quickly — covering Mahad city, MIDC Mahad, Poladpur, Roha, and Pen with rapid response.
✅ Competitive Pricing: Transparent pricing starting from ₹150–₹300 per hole (depending on diameter and depth). No hidden charges.
✅ Minimum Dust and Noise: Wet core drilling keeps dust down and noise low — ideal for working in occupied buildings and residential complexes.
✅ All Surface Types: Concrete, RCC, brick, granite, marble, tiles, asphalt — we cut it all.
✅ Safety-First Approach: We follow all construction safety protocols including ELCB usage, PPE for operators, and job hazard assessments.
Core Cutting Price Guide in Mahad
Pricing for core cutting in Mahad depends on:
- Hole diameter (e.g., 50mm, 100mm, 150mm, 200mm+)
- Material type (RCC slab, brick wall, granite)
- Depth of cut (thickness of the structure)
- Number of holes required
- Site accessibility and distance
Indicative Price Range:
| Hole Diameter |
Approx. Price Per Hole |
| Up to 50mm |
₹150 – ₹200 |
| 75mm – 100mm |
₹250 – ₹400 |
| 150mm – 200mm |
₹500 – ₹800 |
| 250mm – 300mm |
₹900 – ₹1,500 |
| Above 300mm |
Custom quote |
Note: Prices may vary based on site conditions and volume. Call us for an accurate quote for your specific project in Mahad.
📞 Call / WhatsApp: 7009679903
Our Core Cutting Process – Step by Step
Understanding how we work helps you plan your project better:
Step 1 – Site Survey & Assessment
Our technician visits the site (or reviews drawings/photos) to understand the structure type, slab thickness, rebar location, and required hole diameter.
Step 2 – Machine Setup
We mount our diamond core drilling rig on the surface using anchor bolts or vacuum fixing stands — ensuring stability and drill accuracy.
Step 3 – Wet Drilling
Water is continuously fed to the drill bit to cool it, reduce dust, and extend diamond bit life. Drilling proceeds steadily until the full depth is reached.
Step 4 – Core Removal
The concrete core (cylinder) is safely extracted and removed from the site or retained for testing if required.
Step 5 – Edge Finishing
The drilled hole edges are checked and smoothened. Any rebar protruding from the hole is cut flush or grouted as required.
Step 6 – Site Cleanup
Slurry and drilling debris are cleaned. The site is left ready for the next trade — plumbers, electricians, or HVAC installers.
Areas We Serve Near Mahad
We provide core cutting services across Mahad and nearby locations including:
- Mahad City (all areas including MIDC, market area, Nagar Panchayat zones)
- MIDC Mahad – Chemical & industrial plant corridor
- Poladpur – Highway construction and residential projects
- Mangaon – Municipal and commercial buildings
- Roha – Industrial and residential sites
- Pen – Infrastructure and housing projects
- Shrivardhan – Coastal and resort construction
- Khed – Agro-industrial and warehousing projects
We also serve major Maharashtra cities including Mumbai, Pune, and Nagpur for larger projects.
If you are looking for wall cutting services in other parts of Maharashtra, check out our services in:
Industries and Projects We Serve in Mahad
Our core cutting services in Mahad are used across a wide range of sectors:
Residential Construction: New flats, bungalows, and row houses needing AC pipe holes, plumbing rough-ins, and exhaust vents.
Commercial Buildings: Offices, showrooms, and malls requiring HVAC duct openings and electrical raceways.
Industrial Facilities – MIDC Mahad: Chemical plants, pharmaceutical factories, and warehouses needing equipment drain holes, pipe penetrations, and explosion-proof conduit routes.
Infrastructure Projects: Roads, bridges, culverts, and retaining walls across the Raigad corridor.
Renovation & Retrofitting: Old buildings being upgraded with modern plumbing and electrical systems.
Testing Labs & Structural Audits: Core samples extracted for concrete strength testing and structural health monitoring.
Safety Standards We Follow
Core cutting involves working with rotating machinery, high-torque drilling, and water — which demands rigorous safety practices. Our team follows:
- Use of ELCB (Earth Leakage Circuit Breaker) for electrical safety
- Mandatory PPE — helmets, gloves, eye protection, rubber boots
- Pre-drilling check for embedded steel and live electrical conduits
- Structural assessment before drilling near load-bearing zones
- Proper slurry containment to avoid water seepage into lower floors
- Machine guarding and anti-vibration mounts for high-rise drilling
Frequently Asked Questions – Core Cutting in Mahad
Q1. What is core cutting and when is it needed?
Core cutting is a technique to create precise circular holes in concrete, RCC slabs, walls, and floors using a diamond-tipped drill. It is needed during construction, renovation, or infrastructure work when openings are required for pipes, ducts, electrical conduits, or structural testing — without breaking or damaging the surrounding structure.
Q2. How much does core cutting cost in Mahad?
Core cutting prices in Mahad typically start from ₹150 per hole for small diameters (up to 50mm) and go up to ₹1,500 or more for large-diameter drilling above 300mm. The final price depends on the hole size, material hardness, slab thickness, and number of holes. Contact us on 7009679903 for a free quote.
Q3. Is core cutting safe for load-bearing walls and slabs?
Yes, when done by trained professionals, core cutting is safe even near load-bearing areas. Our technicians assess the structure before drilling, identify rebar positions, and avoid critical structural zones. We follow IS code recommendations for opening sizes and locations.
Q4. How long does core cutting take on a typical site in Mahad?
A standard residential project with 5–10 holes typically takes 2–4 hours. Larger industrial projects with multiple drill points may take one or more full days. We give you a time estimate after reviewing your project scope.
Q5. Do you provide core cutting services in MIDC Mahad?
Yes, we regularly work in MIDC Mahad for industrial clients — chemical plants, manufacturing units, and logistics warehouses. We are equipped for heavy-duty drilling in industrial-grade concrete and comply with factory safety requirements.
Q6. Can you cut very large diameter holes — like 300mm or 400mm?
Yes, we have the equipment to drill holes up to 600mm diameter and beyond using segmented diamond core bits and high-powered drilling rigs. Large-diameter core cutting is commonly used for HVAC duct openings and heavy pipe inserts in industrial buildings.
Q7. Do you also offer wall cutting (slot cutting) services in Mahad?
Yes, alongside core drilling we also provide wall cutting, slab cutting, and road cutting services in Mahad. Whether you need a rectangular opening or a linear cut for a beam pocket, our team handles it with wire saws and wall saws.
Q8. How do I book core cutting services in Mahad?
Simply call or WhatsApp us on 7009679903 or email [email protected] with your site location, number of holes, required diameter, and structure type. Our team will get back to you with a price and mobilisation date within hours.
Get a Free Quote for Core Cutting in Mahad Today
Don't waste time with untrained local labourers who use jackhammers and risk damaging your structure. Trust the professionals at Core Cutting India — Mahad's go-to team for precision diamond core drilling.
We serve Mahad, Roha, Pen, Mangaon, Poladpur, Shrivardhan, and all surrounding areas in the Raigad district. Whether it's a single hole in an apartment or 200 drill points in an MIDC factory, we deliver on time, on budget, and with zero structural damage.
📞 Call / WhatsApp Now: 7009679903
📧 Email: [email protected]
Fast response. Transparent pricing. Guaranteed precision.
