Planning to open a staircase, add a lift shaft, or remodel your home, and the concrete roof is in the way? Breaking it with hammers is slow and noisy, and it can crack the rest of your building. That is why more property owners now choose a professional roof cutting service in Dhuri.
At Core Cutting India, we cut RCC roofs and slabs using diamond-tipped machines. The cuts are straight, the vibration is low, and the surrounding structure stays safe. Whether you live in Dhuri city, a nearby village, or an industrial area, our trained team can reach your site, inspect it, and give you a clear quote.
Call or WhatsApp us on 7009679903 for a free site visit and quote.
What Is Roof Cutting?
Roof cutting, also called slab cutting or RCC cutting, is a method of removing a measured section of a concrete roof or floor slab. Instead of breaking the concrete, we cut it along marked lines with a diamond blade or diamond wire.
The result is a clean, straight edge. The cut piece is removed in manageable blocks, and the rest of the slab stays intact.
It is the preferred method when:
- You want to make an opening for a staircase
- You are adding a lift or elevator shaft
- You need space for a skylight, duct or water tank
- You are renovating an old building without damaging the structure
- You are extending or merging two floors or two buildings
Why Choose Our Roof Cutting Service in Dhuri?
Many contractors in the area still use breakers and chisels. We do not, and here is why customers trust us.
1. Clean and Accurate Cuts
Diamond cutting follows the exact line you marked. There are no uneven edges or surprise cracks, so finishing work such as plastering, steel framing, or tiling becomes much easier.
2. Low Vibration, Safe for Your Building
Hammering sends shockwaves through beams, columns and walls. Our machines cut with very little vibration. This matters in older buildings and in homes with shared walls in crowded Dhuri localities.
3. Less Noise and Less Dust
We use water-cooled cutting, which keeps dust down. Your family, shop, or office can carry on with much less disturbance.
4. Faster Completion
A job that takes days with manual breaking can often be done in hours with a wall saw or wire saw, depending on thickness and size.
5. Transparent Pricing
No hidden charges. You get a clear estimate after the site check, and you can also use our online rate calculator for a quick idea.
6. Trained Operators and Safety First
Every job is handled by experienced machine operators who follow safety steps before, during and after cutting.
Our Roof and Slab Cutting Services in Dhuri
We offer different methods depending on your slab thickness, the type of reinforcement, and access to the site.
Wall Saw / Slab Saw Cutting
A diamond blade runs on a track and cuts straight lines through RCC. This works well for staircase openings, door and window cuts, and large straight sections.
Wire Saw Cutting
A diamond-coated wire loops around the section and slices through very thick or hard-to-reach concrete. It suits heavy slabs, beams, and awkward corners where a blade cannot fit.
Hand Saw and Ring Saw Cutting
Used for tight spaces and shallow cuts where a big machine cannot enter, such as small terraces or narrow staircases.
Core Drilling for Pipes and Ducts
We make round holes for plumbing, drainage, AC ducts and cables. See also our core cutting service in Mohali for related work.
Floor Cutting and Trench Cutting
For factories, workshops and godowns that need floor channels for drainage or machinery lines.
Common Uses of Roof Cutting in Dhuri
Dhuri is a growing town with a mix of homes, shops, agricultural businesses, and small industry. Here is where our customers usually need roof cutting:
- New staircase to a terrace or upper floor in houses and shops
- Lift installation in homes, hospitals and commercial buildings
- Skylight or ventilation opening to bring in natural light
- Water tank, solar or duct opening through a slab
- Building extension where an old roof must be joined to a new one
- Rice mill, warehouse and godown modifications around Dhuri and nearby areas
- Shop-to-showroom conversion where an internal opening is needed
- Partial roof removal without bringing down the whole structure
Our Roof Cutting Process: Step by Step
Knowing how the work happens helps you plan. Here is our usual process:
Step 1: Call or WhatsApp
Share your location in Dhuri, a photo of the roof, and what you want to cut. Message us on 7009679903.
Step 2: Free Site Inspection
Our team visits, checks slab thickness, steel reinforcement, beam positions, and access. We also note power and water availability.
Step 3: Marking and Planning
We mark the cutting lines clearly with you. This is the time to confirm the exact size and shape of the opening.
Step 4: Safety Setup
We support the slab where needed, protect nearby areas, and set up water and power for the machines. People and belongings are kept clear of the cutting zone.
Step 5: Precision Cutting
Using the right diamond machine, we cut along the marked lines. Water keeps the blade cool and reduces dust.
Step 6: Safe Removal of Concrete
The cut portion is lifted or broken into manageable blocks and removed in a controlled way.
Step 7: Cleaning and Handover
We clean the area, remove slurry, and show you the finished opening before we leave.
Roof Cutting Cost in Dhuri: What Affects the Price?
This is the question most people ask first, and it is a fair one. Roof cutting is usually priced per running foot, per square foot, or per cut, depending on the job.
| Type of Work |
Approximate Pricing |
| Slab cutting (thin RCC, up to 6 inch) |
₹60 – ₹120 per running foot |
| Thick slab / heavy RCC cutting |
₹120 – ₹250 per running foot |
| Wire saw cutting |
Quoted on site, based on volume |
| Core drilling (small holes) |
Quoted per hole, based on diameter and depth |
Factors That Change the Final Cost
- Slab thickness: thicker concrete takes more time and blade wear
- Amount of steel: more reinforcement means slower cutting
- Total length of cut: more cutting means more cost
- Height and access: upper floors or narrow spaces need extra effort
- Location: distance from our base to your site
- Machine type: wall saw, wire saw or hand saw
- Debris removal: whether you want us to take away the concrete
For a fast estimate, try our online rate calculator. For an exact price, call 7009679903 and our team will visit the site.
Technology We Use
Good results come from good equipment. Our work is done with:
- Diamond blades and wires that cut concrete and steel cleanly
- Hydraulic wall saws for deep and long straight cuts
- Wire saw systems for thick and complex sections
- Water cooling systems to control dust and heat
- Core drilling rigs for neat round holes
Diamond cutting is a cleaner and more controlled way to open concrete compared to traditional breaking, especially when you need to protect the remaining structure.
Safety and Quality: Our Promise
Cutting a roof is serious work. We take these precautions on every job:
- Checking the structure before starting
- Planning the cut sequence so the slab does not drop unexpectedly
- Using temporary supports when needed
- Wearing helmets, gloves, goggles and ear protection
- Keeping the work zone barricaded
- Safe handling of electricity and water together
- Proper disposal of slurry and debris
Tip for homeowners: Always get a professional inspection before cutting a load-bearing slab. If your building is very old, ask a structural engineer to confirm the plan. We are happy to work with your engineer or contractor.
Roof Cutting vs Traditional Breaking: Quick Comparison
| Feature |
Diamond Roof Cutting |
Manual Breaking |
| Accuracy |
Very high |
Low |
| Vibration |
Minimal |
High |
| Risk of cracks |
Low |
High |
| Noise and dust |
Lower |
Very high |
| Speed |
Faster |
Slower |
| Finishing work |
Easy |
Needs more repair |
For most renovation work, diamond cutting saves money in the long run because you spend less on repair and finishing.
Areas We Serve Near Dhuri
Our team serves Dhuri city and nearby areas, including the Dhuri Railway Station area, the Sangrur–Malerkotla road belt, Dhuri Anaj Mandi area, and nearby industrial and residential colonies. We also travel to surrounding towns and villages, such as:
- Sangrur
- Malerkotla
- Barnala
- Sunam
- Bhawanigarh
- Ahmedgarh
- Dhanaula
- Patiala
- Nabha
- Ludhiana
Other Cities and Regions We Cover
We also provide slab cutting, core cutting and related services across Punjab and neighbouring states. See our pages for:
If your location is not listed, just call us. We try to accommodate projects across Punjab, Haryana, Himachal and the Chandigarh region.
Who Needs Our Roof Cutting Service?
- Homeowners adding a staircase or terrace access
- Builders and contractors who need quick, accurate openings
- Architects and engineers who want precise cuts to specification
- Factory and warehouse owners modifying existing structures
- Shopkeepers and showroom owners redesigning space
- Hospitals and schools installing lifts or new utilities
Why Customers in Dhuri Trust Core Cutting India
- Clear communication in Punjabi, Hindi and English
- On-time arrival and a clean working style
- Honest advice, even if it means a smaller job
- Equipment suited for both home and industrial work
- Support after the job if you need adjustments
Your roof is a major part of your property, so we treat every cut as if it were our own building.
Tips Before You Book a Roof Cutting Service
- Decide the exact size of the opening before the team arrives.
- Check your building drawing if you have one.
- Ask about beams and columns near the cutting line.
- Keep water and power access ready.
- Clear the area below the slab.
- Ask for a written quote with the scope clearly mentioned.
- Confirm whether debris removal is included.
Frequently Asked Questions (FAQs)
What is roof cutting service in Dhuri?
Roof cutting service in Dhuri means cutting an opening in an RCC roof or slab using diamond machines. It is used for staircases, lifts, skylights, ducts and renovations, and it avoids the damage caused by manual breaking.
How much does roof cutting cost in Dhuri?
Roof cutting in Dhuri usually costs between ₹60 and ₹250 per running foot, depending on slab thickness, steel, access and length of cut. You can use our rate calculator or call 7009679903 for an exact quote.
Is roof cutting safe for my building?
Yes, when done by trained professionals. Diamond cutting causes very little vibration compared to hammering, which protects beams, walls and columns. A site inspection and proper support planning make it even safer.
How long does it take to cut a roof slab?
A typical staircase opening in a house can often be completed in a few hours to one day, depending on thickness, steel and access. Larger or thicker slabs may take longer.
Can you cut a roof without breaking the rest of the structure?
Yes. Wall saw and wire saw cutting follow exact lines, so only the marked section is removed and the remaining slab stays intact.
Do you provide roof cutting near Dhuri, such as in Sangrur and Malerkotla?
Yes. We serve Dhuri and nearby areas, including Sangrur, Malerkotla, Barnala, Sunam, Patiala and more. Call 7009679903 to confirm availability in your area.
Is a permit or engineer's advice needed before roof cutting?
For load-bearing slabs, beams or old buildings, it is wise to consult a structural engineer. Local rules may also apply for some buildings. We can coordinate with your engineer to plan the cut safely.
How do I book a roof cutting service in Dhuri?
Call or WhatsApp 7009679903 or email [email protected] with your location, photos and the size of the opening. We will arrange a free site visit and give you a clear quote.
Get Your Roof Cutting Service in Dhuri Today
If you are planning a staircase, lift, skylight or renovation, do not risk damage with old-style breaking. Choose a roof cutting service in Dhuri that is precise, safe and honest about pricing.
Contact Core Cutting India
Tap to call or send us a WhatsApp message now. Get a free site visit and a clear quote for roof cutting in Dhuri and nearby areas.
