A roof opening sounds simple until you see the slab. Five or six inches of concrete, thick steel bars inside, a family living below, and a shop owner next door who does not want dust on his goods. Suddenly the job feels risky.
This is where a trusted roof cutting service in Raikot makes life easier. At Core Cutting India, we use diamond cutting machines to open RCC roofs and slabs along neat, straight lines. No wild hammering, no shaking walls, and no ugly broken edges.
Whether you are in Raikot city, near the old bazaar, or in a village around Jagraon Road, we help with staircases, skylights, lift shafts, duct openings and more.
Call or WhatsApp: 7009679903 for a free chat about your roof.
What Does a Roof Cutting Service Do?
A roof cutting service uses diamond-tipped saws to cut a marked section out of an RCC roof or slab, so you can create a staircase, skylight, lift shaft or pipe opening without damaging the rest of the structure. It gives straight edges, lower vibration and far less mess than manual breaking.
Is It Time to Cut Your Roof? Common Reasons People Call Us
Many property owners in Raikot contact us for one of these reasons:
- "I want a staircase to my terrace." The most common request by far.
- "We are adding a first floor." A new opening is needed to connect both levels.
- "My shop needs a mezzanine." Part of the ceiling must be removed neatly.
- "We need a lift." A shaft opening has to be cut through each slab.
- "Water tank access is difficult." A small hatch on the roof solves it.
- "A section of my slab is damaged." It must be cut out and recast.
- "I need ventilation or light." A skylight or air shaft is the answer.
If your reason is not on this list, do not worry. Send us a photo and we will tell you what is possible.
Our Roof and Slab Cutting Services in Raikot
RCC Roof Cutting
Openings in terrace slabs for staircases, head-room, tank access and ventilation.
Slab Cutting Between Floors
Clean cuts for connecting floors, lift shafts and duct openings.
Wall Saw Cutting
A rail-guided saw that gives long, accurate cuts through thick concrete.
Wire Saw Cutting
A diamond wire loop that handles very thick slabs, columns and hard-to-reach sections.
Ring Saw and Hand Saw Cutting
Compact tools for corners, narrow spaces and small jobs.
Core Cutting
Round holes for drainage, AC pipes, wiring and plumbing.
Door and Window Cutting
Precise openings in concrete or brick walls.
You can also see our work in other Punjab cities such as Amritsar, Batala and Abohar.
Why Diamond Cutting Is Better Than Breaking by Hand
Many local contractors still use hammers and breakers because it looks cheaper. But the hidden costs show up later.
| What Matters |
Diamond Cutting |
Manual Breaking |
| Edge finish |
Straight and smooth |
Rough, uneven |
| Vibration |
Very low |
High and risky |
| Dust |
Controlled with water |
Heavy and spreading |
| Cracks in nearby walls |
Rare |
Common |
| Repair after work |
Little |
A lot |
| Time on site |
Shorter |
Longer |
| Safety |
Planned and controlled |
Unpredictable |
The small saving at the start can turn into a big repair bill. Machine cutting protects your money as well as your house.
Our Working Process: What Happens After You Call
Step 1: Tell Us About the Job
Share your location in Raikot, the size you need and a few photos through WhatsApp.
Step 2: We Visit and Inspect
We measure slab thickness, check steel layout and see how water, power and debris removal can be managed.
Step 3: Fix the Outline Together
The cutting line is marked on the roof. We start only after you approve it.
Step 4: Safety Setup
We plan how every cut block will be supported and lowered. We also check for hidden wires and pipes.
Step 5: Cutting Begins
The right machine cuts through concrete and steel with water cooling.
Step 6: Block Removal
Pieces are lifted out in safe, manageable sizes.
Step 7: Final Handover
You receive clean edges ready for your next stage of construction.
Roof Cutting Cost in Raikot: Clear and Honest Pricing
Let us talk about money, because it is what most people want to know first.
Roof cutting is normally priced per running foot, which is the total length of all the cuts you need. The thicker the slab and the more the steel, the more effort the machine needs.
Indicative Price Guide
| Type of Job |
Approximate Rate |
| RCC roof, 4–6 inch thick |
₹100 – ₹180 per running foot |
| Thick slab, 7–12 inch |
₹180 – ₹300+ per running foot |
| Core cutting |
Per hole, based on size and depth |
| Wall opening |
Per running foot or per job |
| Wire saw / heavy work |
Quoted per project |
Two Quick Examples
Example 1: Terrace staircase, 9 ft × 3 ft Cut length = 9 + 9 + 3 + 3 = 24 running feet. In the standard range, you could expect roughly ₹2,400 to ₹4,300 before extras.
Example 2: Small water-tank hatch, 3 ft × 3 ft Cut length = 12 running feet. Estimated cost is about ₹1,200 to ₹2,200 in standard conditions.
Note: These are indicative only. Minimum charges, lifting, travel and access difficulty may change the final amount.
What Can Increase the Cost?
- Very thick or heavily reinforced slabs
- Cutting at a great height with no easy access
- No water or power on site
- Heavy debris removal
- Long travel distance
Get Your Estimate in Seconds
Try our Rate Calculator or message us on WhatsApp for a firm quote.
Equipment and Technology We Rely On
- Diamond blades and segments for smooth cutting of concrete and rebar
- Wall saws for deep, accurate straight lines
- Wire saws for very thick or awkward structures
- Water cooling systems to keep dust low and blades sharp
- Compact saws for tight corners
- Safety equipment for every team member
Technology matters because it decides the finish. A clean cut today means fewer problems tomorrow.
Benefits You Get With Professional Roof Cutting
- Safer for your structure: Cuts are planned around beams and columns
- Neat edges: Saves time and money on finishing
- Less vibration: Walls, tiles and plaster stay intact
- Faster results: Many home jobs are completed in a day
- Lower noise and dust: Better for families, shops and offices
- Predictable cost: You know the price before the work begins
- Works on all building types: Houses, shops, godowns, schools and factories
Safety Comes First on Every Site
Our team follows simple but strict safety habits:
- Scan the cutting area for electrical lines and pipes
- Keep people away from the area below the roof opening
- Support heavy pieces before the final cut
- Use water to control dust
- Wear helmets, goggles, gloves and masks
- Keep machines checked and well maintained
Please remember: If you plan a large opening in a load-bearing slab, consult a qualified structural engineer first. We are happy to coordinate with your engineer or architect.
Where Roof Cutting Is Used Around Raikot
Residential Homes
Staircases, head-room and terrace access for growing families.
Commercial Shops
Mezzanine floors, ceiling modifications and lift openings.
Godowns and Workshops
Wider openings for materials, ducts and machinery.
Schools and Clinics
Lift shafts, ventilation and new passages.
Repair and Reconstruction
Removing damaged slab sections safely.
Areas We Serve Around Raikot
We work in Raikot and nearby places, including:
- Raikot city and surrounding colonies
- Jagraon
- Sudhar
- Mullanpur Dakha
- Halwara
- Dehlon
- Sahnewal
- Ludhiana
- Malerkotla and Ahmedgarh
- Barnala and Khanna
Other Cities We Cover
Core Cutting India provides concrete cutting services across Punjab:
Visit our main website, corecuttingindia.com, to explore every service and location.
Why Choose Core Cutting India?
- Prompt response for Raikot and nearby areas
- Transparent estimates before the job starts
- Correct machine selection for each slab
- Experienced operators who work carefully
- Clean site practices
- Simple communication in Punjabi, Hindi and English
- Options for every budget
Common Myths About Roof Cutting
Myth 1: "Cutting will weaken my building." Poorly planned cutting can. Proper planning and engineer advice keep the structure safe.
Myth 2: "Hammer breaking is cheaper." It may look cheaper at first, but repairs and finishing often cost more.
Myth 3: "Steel bars cannot be cut cleanly." Diamond tools cut steel and concrete together without trouble.
Myth 4: "It will take many days." Many standard openings are done within a day.
Frequently Asked Questions (FAQs)
1. What is roof cutting service in Raikot?
Roof cutting service in Raikot means cutting RCC roofs or slabs using diamond saws to make openings for stairs, skylights, lifts or pipes. It is cleaner and safer than manual breaking.
2. How much does roof cutting cost in Raikot?
In Raikot, roof cutting usually costs between ₹100 and ₹300 per running foot, depending on slab thickness, steel and access. You can use our online calculator for a quick estimate.
3. Is roof cutting safe?
Yes, it is safe when done by trained professionals with proper planning and support. For large openings in load-bearing slabs, check with a structural engineer.
4. How long does it take to cut a roof?
A staircase or small opening is usually completed in a few hours to a day. Larger or thicker slabs may take more time.
5. Can you cut concrete with steel bars inside?
Yes. Diamond blades and wire saws cut both concrete and reinforcement steel.
6. Will cutting crack my walls or tiles?
Machine cutting creates very little vibration, so the risk is far lower than with hammer breaking.
7. Do you provide service near Raikot, like Jagraon and Ludhiana?
Yes. We serve Jagraon, Sudhar, Mullanpur Dakha, Ludhiana, Barnala and many other areas, along with cities across Punjab.
8. How can I book a roof cutting service in Raikot?
Call or WhatsApp 7009679903, or email [email protected] with photos, location and measurements. We will arrange the visit and quote.
Ready to Open Your Roof the Right Way?
Do not risk your house with rough, shaky breaking. Let professionals handle your roof with precision.
📞 Call: 7009679903
Send your photos and size on WhatsApp for a quick quote today.
Conclusion
A roof opening should improve your property, not harm it. With diamond cutting, careful planning and an experienced team, you get clean edges, low vibration and a safe result. For homes, shops, godowns and workshops across Raikot, Jagraon, Sudhar, Mullanpur Dakha and Ludhiana, a professional roof cutting service in Raikot is the smarter way to get the job done.
Call Core Cutting India on 7009679903 and book your roof cutting today.
