Looking for a reliable roof cutting service in Jodhpur? Core Cutting India cuts RCC roofs and slabs using diamond-blade machines, so your building stays strong, your neighbours are not disturbed, and your work finishes on time. We handle openings for staircases, lifts, skylights, ducts, water tanks and renovation work in homes, shops, offices, factories and schools.
Call or WhatsApp: 7009679903 | Email: [email protected] | Website: corecuttingindia.com
Roof cutting means cutting a section of a concrete roof or slab with a diamond wall saw, slab saw or wire saw, instead of breaking it with a hammer. In Jodhpur, professional roof cutting usually costs between ₹90 and ₹350 per running foot, depending on slab thickness, steel reinforcement, height and site access. Use our online rate calculator for a quick estimate.
What Is Roof Cutting, and Why Do Jodhpur Homeowners Choose It?
Many houses in Jodhpur, from old homes near Ratanada and Paota to new builds in Pal Road, Basni and Chopasni Housing Board, were built with solid RCC slabs. When you want to add a staircase, open a new window, shift a water tank or extend a floor, a part of that slab has to go.
The old method was to break it with a jackhammer. That causes heavy vibration, cracks in nearby beams, flying debris and a lot of noise. Modern RCC roof cutting is different. A diamond blade cuts a clean, straight line through concrete and steel. Only the marked portion is removed. The rest of your structure stays untouched.
That is why architects, civil engineers and contractors in Jodhpur now prefer machine cutting for any slab modification.
Roof Cutting vs Slab Cutting vs Concrete Cutting
People search for these terms differently, but they are closely related:
- Roof cutting: removing a portion of a terrace or top-floor slab.
- Slab cutting: cutting any floor or roof slab, including inside a building.
- Concrete cutting: a wider term that includes walls, floors, beams and pavements.
- Core cutting (core drilling): making round holes for pipes, AC lines, cables and drainage.
If you are not sure which one you need, send us a photo on WhatsApp. We will tell you the right method.
Our Roof Cutting Services in Jodhpur
We offer a full range of slab and roof cutting work for residential, commercial and industrial sites.
1. RCC Roof Cutting for Staircase Openings
The most common request. We cut a clean rectangular opening so a new staircase can connect your ground floor to the terrace or first floor.
2. Lift Shaft and Elevator Opening Cutting
Adding a lift in an existing building needs precise cutting through each floor slab. Our operators follow your drawing to the exact size.
3. Skylight and Ventilation Opening
Want more daylight in a dark house? A skylight opening in the roof is one of the best upgrades. We cut it without damaging waterproofing around it.
4. Water Tank and Duct Opening
Openings for overhead tanks, plumbing shafts, AC ducts and exhaust fans are cut cleanly, with smooth edges that need very little finishing.
5. Partial Slab Removal for Renovation
Heritage and old-style homes often need part of the slab removed for a new layout. Controlled cutting protects the beams and columns you want to keep.
6. Slab Cutting for Demolition in Sections
Instead of crashing the whole roof down, we cut it into manageable blocks. This is safer and keeps debris handling simple.
7. Core Cutting and Core Drilling
Round holes from 25 mm up to large diameters for plumbing, electrical, HVAC and drainage. Learn more on our core cutting service page.
How Our Roof Cutting Process Works (Step by Step)
A clear process builds trust. Here is exactly what happens when you book us.
- Enquiry: You call or WhatsApp us on 7009679903 with your location, photos and the opening size you want.
- Site visit and inspection: Our team checks slab thickness, beam position, steel reinforcement and access to the roof.
- Marking: The cutting lines are marked with your engineer or architect, so the opening is exactly where it should be.
- Quotation: You get a written estimate based on running feet or per-hole rate. No hidden charges.
- Safety setup: Area below the slab is cleared and supported where needed. Water supply and power are arranged.
- Cutting: The diamond saw cuts along the marked lines. Water cools the blade and controls dust.
- Lifting and removal: The cut block is lowered or broken into pieces and taken out safely.
- Clean-up: We leave the site tidy, with smooth edges ready for finishing.
Most small and medium openings are completed in a few hours to one day. Larger jobs depend on thickness and quantity.
Technology and Machines We Use
Good equipment decides the quality of the cut. We use:
- Diamond wall saws: for deep and straight cuts in thick roof slabs.
- Hand-held and floor saws: for flat terraces and shallow cuts.
- Wire saws: for large, awkward or heavily reinforced sections.
- Core drilling rigs: for neat round holes of different diameters.
- Water cooling and slurry control: to protect blades and reduce dust.
Why diamond cutting is better than breaking:
| Feature |
Diamond Roof Cutting |
Manual Breaking |
| Vibration |
Very low |
High |
| Noise |
Moderate |
Very high |
| Dust |
Controlled with water |
Heavy |
| Accuracy |
Straight, clean edges |
Rough and uneven |
| Risk to nearby structure |
Low |
High |
| Finishing work |
Minimal |
Extra plastering needed |
| Speed |
Fast |
Slow |
Benefits of Hiring a Professional Roof Cutting Service in Jodhpur
- Structure stays safe: No hammer shocks, so no new cracks in beams or walls.
- Precise openings: Cuts match your drawing within a small tolerance.
- Less dust and noise: Important in Jodhpur's dry, dusty weather and in crowded lanes.
- Faster work: Machine cutting saves days compared to manual breaking.
- Lower finishing cost: Smooth edges mean less plaster and repair.
- Works through steel: Diamond blades cut concrete and reinforcement bars together.
- Safer for your family: Controlled cutting reduces falling debris and accidents.
- Clean site: Less mess to clear after the job.
Safety Standards We Follow
Safety is not optional when cutting a roof. Our team follows these practices on every site:
- Structural check before cutting, and engineer consultation where required.
- Proper props or supports below the cut portion when needed.
- Safe lifting plan so the cut block never falls uncontrolled.
- Helmets, gloves, goggles, ear protection and dust masks for operators.
- Electrical safety with earthing and water-proof connections.
- Barricading of the working and drop zones.
- No work in unsafe weather conditions such as heavy rain or strong wind.
We always recommend that you share your structural drawing or consult your civil engineer for load-bearing slabs, especially in old buildings.
Roof Cutting Rate in Jodhpur – Pricing Guide
Pricing is one of the first things people want to know. Rates depend on your exact site, so the figures below are indicative ranges only. For the most accurate number, use our rate calculator or send us photos.
| Type of Work |
Approx. Rate in Jodhpur |
| RCC roof / slab cutting (up to 6 inch thickness) |
₹90 – ₹180 per running foot |
| RCC roof / slab cutting (6 to 12 inch thickness) |
₹180 – ₹350 per running foot |
| Core cutting (small holes, 25–100 mm) |
Per-hole rates, depending on depth |
| Core cutting (large holes, 150 mm and above) |
Higher per-hole rates, based on diameter |
| Wire saw cutting |
Quoted after site inspection |
| Minimum job charge for small work |
May apply |
What Affects Roof Cutting Cost?
- Slab thickness: thicker slabs take more time and blade wear.
- Reinforcement: dense steel increases cutting time.
- Total cutting length: more running feet, more cost (but better per-foot rate on large jobs).
- Height and access: a fourth-floor terrace is harder than a ground-floor roof.
- Location: travel to areas outside Jodhpur city may add a small charge.
- Debris removal and lowering: extra manpower or lifting support.
- Urgency: same-day work may cost more than planned work.
Tip: Ask for a quote that clearly states the unit (per running foot or per sq ft), thickness assumed, and whether debris removal is included. This avoids confusion later.
Where We Provide Roof Cutting Service in Jodhpur
We serve all major areas of Jodhpur city and nearby towns:
Inside Jodhpur: Ratanada, Paota, Shastri Nagar, Sardarpura, Pal Road, Basni, Chopasni Housing Board, Mandore, Kudi Bhagtasni, Boranada, Jhalamand, Sangaria, Bhagat Ki Kothi, Air Force Area and Industrial Areas.
Near Jodhpur: Osian, Bilara, Luni, Pipar, Phalodi, Shergarh and Balotra.
Planning work outside the city? Tell us your location and we will confirm availability on the call.
Core Cutting and Concrete Cutting in Other Cities and Towns of Rajasthan
Besides Jodhpur, we provide cutting and core drilling services across Rajasthan and in other Indian cities. If you or your contractor is working at another site, these local pages may help:
We also work in Pali, Barmer, Jaisalmer, Nagaur, Udaipur, Jaipur, Ajmer, Bikaner and other cities, depending on project size. Call 7009679903 to check availability for your location.
Where Is Roof Cutting Used? (Use Cases)
For Homes
- New staircase to terrace or extra floor
- Skylight or open-to-sky courtyard
- Shifting water tank position
- Balcony or terrace modification
For Shops and Offices
- Lift or escalator opening
- Duct and pipe openings for AC and fire systems
- Mezzanine floor connection
- Opening for new cable trays
For Factories and Warehouses
- Slab cutting for machine foundations or pits
- Drainage and trench cutting
- Roof openings for exhaust and ventilation systems
For Schools, Hospitals and Hotels
- Staircase and ramp additions
- Service shafts
- Renovation in occupied buildings, where low noise and dust matter most
Why Choose Core Cutting India for Roof Cutting in Jodhpur?
There are many cutting contractors, so here is what we focus on:
- Clear communication: You know the plan, price and timing before work begins.
- Trained operators: Experienced hands on every machine.
- Modern diamond tools: Sharp blades, smooth cuts, less delay.
- Transparent estimates: Use the rate calculator to get an idea before you call.
- Respect for your property: Floors, walls and furniture are protected as far as possible.
- Local availability: Quick response for Jodhpur and nearby areas.
- Single point of contact: Call, WhatsApp or email, and you will get a direct reply.
Tips Before You Book a Roof Cutting Service
- Know your goal. Decide the size and position of the opening.
- Consult an engineer. Especially if beams or columns are close by.
- Keep drawings ready. Even a rough sketch helps.
- Clear the area. Remove furniture, plants and stored items below and above the cut.
- Arrange water and power. Machine cutting needs both.
- Take clear photos. Share roof, ceiling below and access path on WhatsApp.
- Compare quotes fairly. Look at what is included, not only the lowest price.
- Plan finishing work. Waterproofing, plastering and painting come after cutting.
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Jodhpur?
Roof cutting in Jodhpur generally costs between ₹90 and ₹350 per running foot, based on slab thickness, steel reinforcement and site conditions. The exact price is confirmed after a quick inspection or by checking photos. You can also use the online rate calculator on our website for a quick idea.
2. Is it safe to cut an RCC roof?
Yes, when done by trained operators with proper machines and a structural check. Diamond cutting makes very little vibration compared to hammering, so the rest of the building remains stable. For old or load-bearing slabs, we advise confirming with a civil engineer first.
3. How long does roof cutting take?
A small opening, such as a skylight or a duct, can be cut in a few hours. A staircase or lift opening may take one day. Large or heavily reinforced slabs can take longer. We give a time estimate after seeing the site.
4. Can you cut a roof without damaging the rest of the house?
Yes. Diamond wall saws and wire saws cut only along the marked lines. Because there is no heavy pounding, the nearby walls, beams and ceilings are protected. Some dust and water will be present, but it is controlled and cleaned.
5. Do you provide roof cutting near me in Jodhpur and nearby villages?
Yes. We serve areas across Jodhpur city and nearby locations such as Osian, Bilara, Luni, Pipar, Phalodi and Balotra. Call or WhatsApp 7009679903 with your location to confirm.
6. What is the difference between roof cutting and core cutting?
Roof cutting creates larger openings, usually square or rectangular, for stairs, lifts or skylights. Core cutting makes round holes of smaller diameter for pipes, cables and AC lines. We offer both services.
7. Do you charge for site visits?
Please confirm on the call. In many cases, we can give you an approximate estimate from photos on WhatsApp, and final pricing is shared after inspection.
8. How do I book a roof cutting service in Jodhpur?
Call or WhatsApp 7009679903, share your location, photos and required opening size, and we will arrange inspection and a written quote. You can also email [email protected].
Get Your Free Roof Cutting Quote in Jodhpur Today
Whether it is a staircase opening in your home or a lift shaft in a commercial building, our team is ready to help with fast, neat and safe work.
Step 1: Send photos of your roof on WhatsApp. Step 2: Get an estimate and schedule. Step 3: Enjoy a clean, accurate opening, without the damage and mess of old methods.
📞 Call / WhatsApp: 7009679903 ✉️ Email: [email protected] 🌐 Website: https://corecuttingindia.com/ 🧮 Check approximate rates: Rate-calculator
Conclusion
A safe and professional roof cutting service in Jodhpur protects your building, saves time and gives you the exact opening you planned. With diamond cutting technology, a clear process, fair pricing and attention to safety, your renovation or construction work moves forward without stress. Call or WhatsApp 7009679903 today, share your requirement, and get a free quote from Core Cutting India.
