Aligarh is best known for its lock and hardware industry and for the education hub around Marris Road, Civil Lines and Sasni Gate. It is also a city where buildings are always being changed. Owners add floors for rental rooms and hostels, shops open upper levels, factories add ventilation and machine openings, and hospitals plan lifts.
Each of these changes starts with cutting a hole in a concrete roof or slab. Doing it with a hammer can crack the slab and disturb the whole building. Doing it with diamond tools keeps the cut clean and the structure safe.
This page is a practical guide to hiring a roof cutting service in Aligarh: what the work involves, how to compare quotes, what it costs and how to avoid common mistakes.
Core Cutting India provides roof, slab, wall and core cutting in Aligarh city, Khair, Iglas, Atrauli, Gonda, Harduaganj, Chandaus, Tappal and nearby areas.
Call or WhatsApp 7009679903 and tell us what you need. We will suggest the right method and share a clear quote.
What Is Roof Cutting? (Quick Answer)
Roof cutting is the controlled removal of a marked section of an RCC roof or slab using diamond blades, wire saws or core bits. It is used for staircases, lift shafts, skylights, ducts, pipes and partial renovation.
Diamond cutting is preferred over hammering because it gives straighter edges, lower vibration, less noise and fewer cracks.
Which Type of Owner Are You? Find Your Situation
If you are a homeowner
You probably want a terrace staircase, a skylight or a few pipe holes. Your priority is a clean cut with minimum mess and a fair price.
If you are a builder or contractor
You need accurate openings on schedule, coordinated with your engineer and masons. Your priority is timing, accuracy and reliable quotes.
If you run a hostel, PG or rental building
You want extra floors, stairs or lift openings without disturbing existing tenants for long. Your priority is low noise, low dust and fast completion.
If you own a factory, workshop or warehouse
You need openings for machines, ventilation, exhaust or conveyors. Your priority is precision and minimum production downtime.
If you manage a school, college or hospital
You need lifts, service shafts and pipe passages in occupied buildings. Your priority is safety, controlled dust and careful timing.
Whichever you are, we plan the work around how you use the space.
Our Roof Cutting Services in Aligarh
RCC Roof and Slab Cutting
We cut reinforced concrete of different thicknesses. Blades and machines are chosen after checking slab thickness and steel density.
Staircase Openings
A neat opening of the right size lets your mason build stairs without extra corrections.
Lift Shaft and Lift Pit Openings
We cut slab openings for elevators in homes, hostels, hospitals, schools and offices with minimum disturbance.
Factory and Workshop Openings
Openings for ventilation, exhaust, pipes, ducts and machine access, cut to your drawing.
Skylight and Ventilation Cutting
Clean openings for skylights, fans, chimneys and ducts.
Wall Saw Cutting
Track-mounted wall saws give smooth, straight cuts for doors, windows, passages and thick walls.
Wire Saw Cutting
Ideal for heavy concrete, deep beams, columns and tight spaces where regular blades cannot fit.
Core Drilling
Accurate round holes for plumbing, drainage, cables, AC lines and anchor fasteners.
Sectional Slab Removal
When only part of a slab must go, we cut it into blocks and remove it in a controlled order.
How to Compare Roof Cutting Quotes in Aligarh
Prices alone can mislead. Use this table when you compare providers.
| Question to ask |
Why it matters |
| What method will you use: diamond cutting or breaking? |
Breaking can crack the slab and raise repair costs |
| Is the rate per running foot, per hole or a fixed project price? |
Helps you compare like with like |
| Is debris removal included? |
Removal can be a large hidden cost |
| Who arranges water and power? |
Avoids delays and extra charges |
| Do you visit the site before quoting? |
Photos alone can miss steel density or access problems |
| How long will the job take? |
Affects your schedule and disturbance |
| Will you protect nearby areas? |
Prevents damage to floors and furniture |
A clear, honest answer to all seven questions is a good sign.
Diamond Cutting vs Hammer Breaking
| Point |
Diamond Cutting |
Hammer / Breaker |
| Edge quality |
Straight and neat |
Rough and broken |
| Vibration |
Low |
High |
| Crack risk |
Very low |
High |
| Noise |
Comparatively lower |
Very loud |
| Dust |
Controlled with water |
Heavy |
| Steel bars |
Cut cleanly |
Bent and exposed |
| Repair after work |
Minimal |
Often extensive |
Our Process: Simple and Transparent
Step 1: Enquiry. Send location, cut size, slab thickness (if known) and photos on WhatsApp 7009679903.
Step 2: Site inspection. We check the slab, steel, access, water and power.
Step 3: Quote and plan. You get a clear price and a simple work plan.
Step 4: Marking. Lines are marked as per your drawing or engineer's advice and confirmed with you.
Step 5: Safety setup. We barricade the area, plan slab support and arrange slurry control.
Step 6: Cutting. Our operators cut steadily along the lines with the right machine.
Step 7: Removal and cleaning. The cut portion is removed safely, the area is cleaned and the opening is ready for the next stage.
Technology and Equipment
- Slab saws for horizontal cuts in roofs and floors
- Wall saws for precise vertical cuts
- Wire saws for thick or hard-to-reach concrete
- Core drilling machines for round holes of many sizes
- Diamond blades, beads and bits matched to the job
- Water cooling and slurry control for cleaner work and longer tool life
Safety Practices We Follow
- A structural engineer's opinion is advised for load-bearing slabs and beams
- Cut sections are supported or lowered in a planned way
- Workers wear helmets, gloves, goggles, ear protection and safety shoes
- Electrical points are earthed and kept away from water
- The area below is cleared of people and valuables
- Slurry and debris are removed to prevent slips and stains
For occupied buildings such as hostels, schools and hospitals, we plan working hours to reduce disturbance and keep people away from the cutting zone.
Roof Cutting Cost in Aligarh: Pricing Guide
The roof cutting cost in Aligarh depends on the job. Main factors:
- Slab thickness
- Total cutting length in running feet
- Amount of steel reinforcement
- Type of machine required
- Floor height and access
- Debris removal and lifting
- Distance from our team to your site
Approximate rate ranges (for guidance only):
| Work |
Basis |
Approximate Range |
| RCC roof / slab cutting |
Per running foot |
₹80 to ₹250 |
| Wall saw cutting |
Per running foot |
₹100 to ₹300 |
| Core drilling |
Per hole (by diameter) |
₹300 to ₹2,500 |
| Wire saw cutting |
Per project |
Quoted after inspection |
| Small jobs |
Minimum charge |
On request |
Final rates depend on site conditions.
Quick estimate: use our Rate Calculator and then call 7009679903 for the final quote.
Ways to keep the cost sensible:
- Share exact measurements and photos
- Combine all cuts in one booking
- Keep power and water ready
- Give clear access for machines
Where Roof Cutting Is Used in Aligarh
- Homes: terrace stairs, skylights, extra room openings
- Hostels, PGs and rental buildings: new floors, stairs, lift openings
- Lock and hardware units: ventilation, exhaust and machine openings
- Shops and showrooms: upper-floor access, AC and duct openings
- Hospitals and clinics: lift installation, service shafts
- Schools, colleges and coaching centres: stairs, lift openings, pipe passages
- Warehouses: loading, ventilation and conveyor openings
- Renovation projects: removing part of an old slab or changing layout
Areas We Serve Around Aligarh
Aligarh City
Marris Road, Civil Lines, Ramghat Road, Sasni Gate, Dodhpur, Kanwariganj, Medical Road, Quarsi, Jamalpur, Delhi Gate and nearby colonies and industrial pockets
Towns and Tehsils
Khair, Iglas, Atrauli, Gonda, Harduaganj, Chandaus, Tappal, Jattari, Lodha, Bijoli
Nearby Cities and Districts
Hathras, Agra, Mathura, Bulandshahr, Etah, Kasganj, Budaun, Ghaziabad
Other Cities
We also serve Delhi NCR, Noida, Meerut, Kanpur, Lucknow, Varanasi, Prayagraj and more.
Need service in other locations? Visit these pages:
Not sure if we cover your area? Call 7009679903 and we will confirm quickly.
Why Choose Core Cutting India?
- Clear quotes: you know the price before work begins
- Right machine for each job: not one tool for every situation
- Skilled operators: people who understand RCC and steel
- Property care: we protect floors, walls and surroundings
- Easy coordination: works smoothly with engineers, architects and contractors
- Simple contact: call, WhatsApp or email
Quick Checklist Before You Book
- Check with your engineer if the slab or beam is load-bearing.
- Keep your drawing or a rough sketch ready.
- Send clear photos and measurements.
- Confirm water and power at the site.
- Inform neighbours, tenants or staff about cutting hours.
- Ask if debris removal is included.
- Compare the method, not only the lowest price.
Frequently Asked Questions
1. What is the cost of roof cutting service in Aligarh?
The cost depends on slab thickness, cutting length, steel density and machine type. RCC roof cutting is usually charged per running foot, and small jobs may have a minimum charge. Use our rate calculator or call 7009679903 for an exact quote.
2. Is roof cutting safe for old buildings in Aligarh?
Yes, with proper planning. Diamond cutting creates much less vibration than breaking, so it is safer for older structures. For load-bearing parts, always confirm with a structural engineer.
3. How long does roof cutting take?
A small opening for stairs or a duct usually takes a few hours to one day. Thick slabs, heavy steel or difficult access can take two days or more.
4. Will roof cutting damage the rest of my slab?
No, not when diamond tools are used. Edges are clean and the surrounding concrete remains intact.
5. Do you provide service in Khair, Iglas and Atrauli?
Yes. We serve Aligarh city and nearby towns such as Khair, Iglas, Atrauli, Gonda, Harduaganj and Chandaus. Call us to confirm your exact location.
6. How do I choose a good roof cutting company in Aligarh?
Ask which method they use, whether they visit the site before quoting, whether debris removal is included and how they handle safety. A clear, written quote is a good sign.
7. Can you cut openings in hostel, school and hospital buildings?
Yes. We plan working hours, barricading and dust control to reduce disturbance in occupied buildings. Share your drawing and photos for a quick assessment.
8. How do I book roof cutting service in Aligarh?
Call or WhatsApp 7009679903, or email [email protected] with your location, cut size and photos. We will arrange a site check and share a clear quote.
Conclusion: Choose the Right Roof Cutting Service in Aligarh
Whether you are adding stairs to your home, a lift to a hospital, extra floors to a hostel or a ventilation opening to a factory, the way your roof is cut decides how safe and tidy the result will be. A professional roof cutting service in Aligarh gives you accurate openings, low vibration, cleaner work and lower repair costs.
Core Cutting India brings diamond cutting technology, careful planning and honest communication to every job, across Aligarh, Khair, Iglas, Atrauli, Harduaganj, Chandaus and the wider region.
Contact us today:
Send your location, cut size and a few photos on WhatsApp, and get a quick quote for roof cutting service in Aligarh.
