Ayodhya is changing quickly. New hotels, homestays, dharamshalas and shops are coming up, older buildings are being upgraded and hospitals and schools are expanding to serve a growing number of visitors and residents. Behind almost every upgrade is a common need: a clean, accurate opening in a concrete roof or slab.
A professional roof cutting service in Ayodhya does this with diamond cutting tools. Instead of breaking the slab with heavy hammers, we cut along marked lines using water-cooled blades and wires. The opening is neat, the vibration is low and the rest of your building stays safe.
Core Cutting India provides roof, slab, wall and core cutting in Ayodhya, Faizabad, Milkipur, Rudauli, Bikapur, Sohawal and nearby areas.
Call or WhatsApp 7009679903 and tell us about your project. We will suggest the right method and share a clear quote.
Roof Cutting Explained in Simple Words
Roof cutting means removing a planned section of an RCC roof or slab using diamond blades, wire saws or core bits. It is commonly used for:
- Staircases to the terrace or a new floor
- Lift and elevator shafts
- Skylights and ventilation openings
- Duct, pipe and cable passages
- Partial slab removal during renovation
Because the concrete and steel are sliced neatly, the risk of cracks and loose joints is much lower than with hammering.
Why Ayodhya Buildings Need Careful Cutting
Ayodhya has a unique mix of buildings and pressures:
- Hospitality growth: hotels, guest houses and homestays need lifts, ducts, extra stairs and new floors, often on tight deadlines
- Crowded and sensitive areas: near busy roads, ghats and religious sites, noise and dust complaints spread quickly
- Older and newer structures side by side: cutting methods must protect existing walls and beams
- Seasonal rush: owners prefer quick, clean work that does not disturb guests or shop customers for long
Diamond cutting fits these needs. It is precise, quieter than breaking and easy to plan around your schedule.
Our Roof Cutting Services in Ayodhya
RCC Roof and Slab Cutting
We cut reinforced concrete of different thicknesses. Blades and machines are matched to the slab and its steel.
Staircase Opening in Roof or Slab
A neat opening of the right size lets your mason build stairs without extra chipping.
Lift Shaft and Lift Pit Openings
Many hotels, hospitals and homes are adding lifts for senior citizens and visitors. We cut slab openings for elevators with minimum disturbance.
Hotel and Homestay Duct Openings
Clean openings for AC ducts, exhaust systems, plumbing shafts and fire-safety pipes.
Skylight and Ventilation Cutting
Bring in light and air with neat openings for skylights, fans and chimneys.
Wall Saw Cutting
Track-mounted wall saws give smooth, straight cuts for doors, windows, passages and thick walls.
Wire Saw Cutting
Ideal for heavy concrete, deep beams, columns and tight spaces where regular blades cannot reach.
Core Drilling
Accurate round holes for water pipes, drainage, cables, AC lines and anchor fasteners.
Sectional Slab Removal
When only part of a slab must go, we cut it into blocks and remove it in a planned sequence.
Diamond Cutting vs Manual Breaking
| Point |
Diamond Cutting |
Manual Breaking |
| Accuracy |
Straight and measured |
Uneven |
| Vibration |
Low |
High |
| Crack risk |
Very low |
High |
| Noise |
Comparatively lower |
Very loud |
| Dust |
Controlled with water |
Heavy |
| Effect on neighbours |
Minimal |
Often disturbing |
| Repair after work |
Little |
Often extensive |
How Your Job Will Go: Step by Step
Step 1: Share your details. Send location, cut size, slab thickness (if known) and photos on WhatsApp 7009679903.
Step 2: Site inspection. We check the slab, access, water, power and safety needs.
Step 3: Quote and plan. You get a clear price and work plan before we begin.
Step 4: Marking. Cut lines are marked as per your drawing or engineer's advice and confirmed with you.
Step 5: Safety setup. We barricade the area, plan slab support and arrange slurry control.
Step 6: Cutting. Our operators cut steadily along the lines with the right machine.
Step 7: Removal and cleaning. The cut section is removed safely, the area is cleaned and the opening is handed over ready for the next stage.
Technology and Equipment
- Slab saws for horizontal cuts in roofs and floors
- Wall saws for exact vertical cuts
- Wire saws for thick or difficult concrete
- Core drilling machines for holes of many diameters
- Diamond blades, beads and bits selected for each job
- Water cooling and slurry control for cleaner work and better tool life
Safety Practices We Follow
- A structural engineer's opinion is advised for load-bearing slabs and beams
- Cut sections are supported or lowered in a planned way
- Workers wear helmets, gloves, goggles, ear protection and safety shoes
- Electrical points are earthed and kept away from water
- People and valuables are cleared from the area below
- Slurry and debris are removed to prevent slips and stains
If your building is old, heavily loaded or close to neighbouring structures, tell us early. We will plan access, working hours and support accordingly.
Permissions: for buildings in regulated or redevelopment zones, please check any approval needed from the local development authority or your society before starting structural changes.
Roof Cutting Cost in Ayodhya: Pricing Guide
The roof cutting cost in Ayodhya depends on the job, not just the size of the opening. Main factors:
- Slab thickness
- Total cutting length in running feet
- Amount of steel reinforcement
- Type of machine required
- Floor height and access
- Debris removal and lifting
- Distance from our team to your site
Approximate rate ranges (for guidance only):
| Work |
Basis |
Approximate Range |
| RCC roof / slab cutting |
Per running foot |
₹80 to ₹250 |
| Wall saw cutting |
Per running foot |
₹100 to ₹300 |
| Core drilling |
Per hole (by diameter) |
₹300 to ₹2,500 |
| Wire saw cutting |
Per project |
Quoted after inspection |
| Small jobs |
Minimum charge |
On request |
Final rates depend on site conditions.
Quick budget check: use our Rate Calculator and then call 7009679903 for the exact quote.
Ways to keep the cost sensible:
- Share exact measurements and photos
- Combine all cuts in one booking
- Keep power and water ready
- Ensure clear access for machines
Common Uses of Roof Cutting in Ayodhya
- Hotels and guest houses: lift openings, duct and exhaust cuts, extra stairs
- Homestays and dharamshalas: terrace access, plumbing shafts, new floors
- Homes: terrace stairs, skylights, extra room openings
- Shops and showrooms: upper-floor access, AC and duct openings
- Hospitals and clinics: lift installation, service shafts
- Schools and colleges: stairs, lifts, pipe passages
- Warehouses and small industries: ventilation, machine and loading openings
- Renovation work: removing part of an old slab or changing layout
Areas We Serve Around Ayodhya
Ayodhya and Faizabad
Civil Lines, Saket Nagar, Rikabganj, Naya Ghat, Devkali, Golaghat, Tedhi Bazar, Lucknow Road, Gorakhpur Road, and the areas around Ram Path and Dharam Path
Towns and Tehsils
Milkipur, Rudauli, Bikapur, Sohawal, Masodha, Goshainganj, Amaniganj
Nearby Districts and Cities
Ambedkar Nagar, Sultanpur, Barabanki, Gonda, Basti, Lucknow, Prayagraj
Other Cities
We also serve Delhi NCR, Agra, Mathura, Kanpur, Varanasi, Gorakhpur, Meerut and more.
Need service in other parts of Uttar Pradesh? Visit these pages:
Not sure if we cover your location? Call 7009679903 and we will confirm quickly.
Why Choose Core Cutting India?
- Clear pricing: you know the cost before work starts
- Right machine for each job: not one tool for every situation
- Skilled operators: people who understand RCC and steel
- Care for your property: protection for floors, walls and surroundings
- Easy coordination: works smoothly with engineers, architects and contractors
- Simple contact: call, WhatsApp or email
Quick Checklist Before You Book
- Check with your engineer if the slab or beam is load-bearing.
- Confirm any approvals needed for structural changes.
- Keep the drawing or a rough sketch ready.
- Send clear photos and measurements.
- Check water and power at the site.
- Inform neighbours or guests about cutting hours.
- Ask if debris removal is included, and compare the method, not only the lowest price.
Frequently Asked Questions
1. What is the cost of roof cutting service in Ayodhya?
The cost depends on slab thickness, cutting length, steel density and machine type. RCC roof cutting is usually charged per running foot, and small jobs may have a minimum charge. Use our rate calculator or call 7009679903 for an exact quote.
2. Is roof cutting safe for old buildings in Ayodhya?
Yes, with proper planning. Diamond cutting creates much less vibration than breaking, so it is safer for older structures. For load-bearing parts, always confirm with a structural engineer.
3. How long does roof cutting take?
A small opening for stairs or a duct usually takes a few hours to one day. Thick slabs, heavy steel or difficult access may need two days or more.
4. Will roof cutting damage the rest of my building?
No, not when diamond tools are used. Edges are clean and the surrounding concrete remains intact.
5. Do you provide service in Faizabad, Milkipur and Rudauli?
Yes. We serve Ayodhya, Faizabad and nearby towns such as Milkipur, Rudauli, Bikapur and Sohawal. Call us to confirm your exact location.
6. What is the difference between roof cutting and slab cutting?
Roof cutting means cutting the top slab of a building. Slab cutting is a wider term for any concrete floor or roof slab. Both use the same diamond cutting methods.
7. Can you cut lift openings for hotels and homestays?
Yes. We cut slab openings for lift shafts, ducts and service shafts in hotels, guest houses and homestays with minimum disturbance to the rest of the building.
8. How do I book roof cutting service in Ayodhya?
Call or WhatsApp 7009679903, or email [email protected] with your location, cut size and photos. We will arrange a site check and share a clear quote.
Conclusion: Trusted Roof Cutting Service in Ayodhya
Ayodhya's buildings are being upgraded every day, and every upgrade deserves clean, careful work. Whether you are adding a lift to a hotel, building stairs to your terrace, opening a duct in a shop or renovating an older home, a professional roof cutting service in Ayodhya gives you accurate openings, safer work and fewer repair costs.
Core Cutting India brings diamond cutting technology, careful planning and honest communication to every job, across Ayodhya, Faizabad, Milkipur, Rudauli, Bikapur, Sohawal and the wider region.
Contact us today:
Send your location, cut size and a few photos on WhatsApp, and get a quick quote for roof cutting service in Ayodhya.
