Do you want to make a new staircase opening, fit a skylight, add a lift, or remove a damaged part of your terrace? Breaking the roof with a hammer is risky. It causes cracks, heavy dust, and can weaken the whole building.
Core Cutting India offers professional roof cutting service in Sant Ravidas Nagar (Bhadohi) using modern diamond cutting machines. We cut RCC roofs and slabs in straight, clean lines. There is no heavy vibration, and the rest of your structure stays safe.
📞 Call or WhatsApp: 7009679903 📧 Email: [email protected] 💰 Check your estimate: Rate Calculator
What Is Roof Cutting?
Roof cutting is the process of cutting a concrete roof or slab in a planned shape and size using diamond blades and special machines. It is also called RCC roof cutting, slab cutting, or roof opening cutting.
Instead of breaking the concrete with a heavy breaker, a diamond blade or wire slices through concrete and steel bars in a clean line. Only the portion you want is removed. The rest of the roof stays untouched.
Roof cutting is commonly used for:
- Making an opening for a staircase to the terrace
- Creating space for a lift or elevator shaft
- Fitting a skylight or ventilation opening
- Passing pipes, ducts, or cables through the slab
- Removing a damaged or unsafe roof portion
- Changing a floor plan during renovation
- Making a water tank or solar panel opening
Why Sant Ravidas Nagar Needs Professional Roof Cutting
Sant Ravidas Nagar, also known as Bhadohi, is growing fast. It is famous for carpets, but new houses, showrooms, factories, godowns and apartments are coming up in Bhadohi town, Gyanpur, Aurai, Suriyawan and Gopiganj. Many owners are also renovating old buildings to add floors, staircases and parking areas.
Older homes in the area often have tightly packed walls, narrow lanes and attached neighbours. Traditional demolition can crack shared walls and disturb families nearby. Professional cutting solves this because it is:
- Quiet: less noise than a jackhammer
- Clean: water-cooled cutting keeps dust low
- Precise: the opening is exactly as marked
- Safe: no shock to beams, columns or nearby walls
Our Roof Cutting Services in Sant Ravidas Nagar
1. RCC Roof Slab Cutting
We cut reinforced concrete roofs of any thickness, including steel bars, using wall saws, ring saws, and hand saws.
2. Staircase Opening Cutting
For homeowners who want terrace access, we make neat staircase openings in the roof with clean edges, ready for finishing.
3. Lift Shaft and Elevator Opening
Adding a lift in an existing building needs accurate cutting. We cut floor and roof slabs to the shaft size given by your engineer.
4. Skylight and Ventilation Openings
Want natural light? We cut square, rectangular, or custom openings for skylights and ventilation.
5. Pipe, Duct and Cable Openings
We create round and rectangular holes for plumbing, AC ducts, and electrical lines. See our core cutting solutions for smaller round holes.
6. Partial Roof Removal
When only a damaged or unwanted part of the roof must be removed, we cut it in sections. This protects the healthy part of the structure.
7. Commercial and Industrial Roof Cutting
Factories, warehouses, hospitals, hotels, schools, and showrooms often need openings in thick slabs. We work with your schedule so your operations are disturbed as little as possible.
Technology and Machines We Use
Good results depend on the right equipment. Here is what we use depending on the job:
Wall Saw Cutting: A rail-mounted diamond blade that cuts straight, deep lines. It suits thick slabs and large openings.
Hand Saw / Slab Saw: A handheld or trolley-mounted saw for shallow cuts, corners, and small jobs.
Ring Saw: Cuts deeper than a normal blade. It helps in corners and thick beams where the wall saw cannot reach.
Wire Saw: A diamond wire cuts very thick or awkward structures where other machines cannot fit.
Core Drilling Machine: Makes round holes for pipes, ducts, and anchor points.
Water Cooling System: Water keeps the blade cool and traps dust, which protects your furniture, family, and workers.
Our Roof Cutting Process, Step by Step
We keep everything simple and transparent.
Step 1: Enquiry and Site Discussion Call or WhatsApp us on 7009679903. Tell us the location, roof thickness, and what you need cut.
Step 2: Site Inspection Our team checks the slab, beams, columns, steel layout, and access for machines.
Step 3: Marking and Planning We mark exact cutting lines with your approval. This step avoids mistakes.
Step 4: Safety Setup We arrange supports, barricades, water supply, and protection for floors and belongings.
Step 5: Cutting Diamond blades cut through concrete and rebar along the marked lines.
Step 6: Section Removal Cut pieces are lifted or lowered carefully, not dropped.
Step 7: Cleaning and Handover We clear the debris and slurry. You receive a clean, ready-to-use opening.
Roof Cutting Rate in Sant Ravidas Nagar (Pricing Guide)
One of the most common questions is: "How much does roof cutting cost?"
The price depends on the job, so a fixed number is not possible for everyone. Here is an approximate guide for Sant Ravidas Nagar and nearby areas:
| Type of Work |
Approx. Rate |
| RCC roof/slab cutting (up to 6 inch) |
₹60 – ₹120 per running foot |
| Thick slab cutting (6–12 inch) |
₹120 – ₹250 per running foot |
| Core cutting (small round holes) |
Charged per hole, based on diameter and depth |
| Minimum job charge |
May apply for small work |
These are indicative rates only. The final quote depends on site inspection.
Factors that affect the price:
- Thickness of the slab
- Amount of steel reinforcement
- Total length of the cut
- Height and floor level of the work
- Machine type needed
- Access, electricity, and water availability
- Whether debris removal is required
- Distance from our team's location
👉 Get a quick estimate now using our online Rate Calculator or send site photos on WhatsApp at 7009679903.
Benefits of Choosing Diamond Roof Cutting
1. Structural Safety Cutting causes little vibration, so nearby beams, columns, and walls are not damaged.
2. Clean, Straight Edges The finish is smooth and accurate, which saves plastering and finishing cost.
3. Less Dust and Noise Water-cooled cutting is friendlier to families, offices, and neighbours.
4. Faster Work Machines work much faster than manual breaking. Many openings are done in one day.
5. Saves Money in the Long Run No repair of cracked walls, no rework, no material wastage.
6. Works in Tight Spaces Bhadohi's narrow lanes and closely built houses need compact machines. Ours are suited for that.
7. Suitable for Renovation and Occupied Buildings People can continue living or working in other parts of the building.
Safety Standards We Follow
Safety is not optional when you cut a roof. Our team follows these practices:
- Structural check before cutting begins
- Proper supports under the section being cut
- Use of helmets, gloves, goggles, and ear protection
- Controlled lowering of cut blocks
- Electrical safety and water-proof connections
- Barricading of the work area
- Clear communication with the owner and engineer
We recommend that owners consult a structural engineer before cutting load-bearing slabs, beams, or large openings. We are happy to coordinate with your engineer or contractor.
Who Uses Our Roof Cutting Service?
- Homeowners adding a staircase, extra floor, or skylight
- Builders and contractors working on renovation or extension
- Carpet factory and godown owners in Bhadohi who need openings for machinery, ducts, or ventilation
- Architects and engineers who need accurate cutting to plan
- Hospitals and schools with strict noise and dust limits
- Government and PWD projects requiring controlled demolition
Areas We Serve Around Sant Ravidas Nagar
We provide roof cutting service in Sant Ravidas Nagar and surrounding towns, including:
- Bhadohi city and Bhadohi Civil Lines
- Gyanpur
- Aurai
- Suriyawan
- Gopiganj
- Durgaganj
- Mirzapur
- Varanasi
- Prayagraj
- Jaunpur
- Ghazipur
- Chandauli
If your location is not listed, call us. We accept projects across Uttar Pradesh and India.
Our Slab Cutting Services in Other Cities
We also offer slab and roof cutting in other cities of Uttar Pradesh:
Visit our main website, Core Cutting India, to see all services and locations.
Why Choose Core Cutting India?
- Trained operators who understand RCC structures
- Modern diamond machines for clean, accurate cuts
- Transparent pricing, with no hidden charges after the quote
- Quick response on call and WhatsApp
- Neat work with minimal disturbance to your property
- Support for all project sizes, from a single opening to full commercial work
- Coverage across Uttar Pradesh, including Sant Ravidas Nagar
Tips Before You Book a Roof Cutting Service
- Share photos and measurements for a faster quote.
- Get an engineer's opinion if the slab is load-bearing.
- Keep water and power access ready at the site.
- Move furniture and valuables away from the work area.
- Confirm debris removal in the quote.
- Ask about timelines so you can plan other work like plastering or waterproofing.
- Compare cost per running foot, not just the total quote, to compare fairly.
Roof Cutting vs Traditional Breaking
| Point |
Diamond Roof Cutting |
Manual Breaking |
| Accuracy |
Very high |
Low |
| Vibration |
Minimal |
Heavy |
| Dust |
Low (water-cooled) |
High |
| Damage to nearby structure |
Very low |
High risk |
| Finish |
Clean edges |
Rough, needs repair |
| Speed |
Fast |
Slow |
For almost every renovation job, diamond cutting is the smarter choice.
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Sant Ravidas Nagar?
Roof cutting in Sant Ravidas Nagar usually costs around ₹60 to ₹250 per running foot, depending on slab thickness, steel content, and site conditions. Some jobs also have a minimum charge. For an exact price, use our rate calculator or call 7009679903.
2. Is roof cutting safe for my building?
Yes. When done by trained professionals using diamond machines, roof cutting is safe. It causes very little vibration and protects nearby walls and beams. For load-bearing slabs, we recommend a structural engineer's approval first.
3. How long does it take to cut a roof opening?
A standard staircase or skylight opening can often be cut in a few hours to one day. Large or thick slabs may take longer. We give a time estimate after inspecting the site.
4. Can you cut an RCC roof with steel bars inside?
Yes. Diamond blades cut through both concrete and reinforcement steel. That is why diamond cutting is preferred for RCC roofs.
5. Do you provide roof cutting near me in Bhadohi and nearby towns?
Yes. We serve Bhadohi, Gyanpur, Aurai, Suriyawan, Gopiganj, Mirzapur, Varanasi, Prayagraj, Jaunpur, and more. Call or WhatsApp 7009679903 to confirm availability in your area.
6. Is roof cutting better than breaking the slab?
Yes, in most cases. Cutting gives clean edges, less dust, low vibration, and no damage to the nearby structure. Breaking is noisy, messy, and can crack the rest of the building.
7. Will the cutting make a lot of dust or noise?
No. Water-cooled diamond cutting greatly reduces dust, and the noise is much lower than jackhammer breaking. This suits homes, offices, hospitals, and shops.
8. How can I get a quick quote?
Send photos and approximate measurements on WhatsApp to 7009679903, email [email protected], or use the online rate calculator. We usually reply quickly.
Book Your Roof Cutting Service in Sant Ravidas Nagar Today
Whether you are building a staircase, adding a lift, opening a skylight, or renovating a factory, the right cutting method saves time, money, and stress. Our team offers professional roof cutting service in Sant Ravidas Nagar with clean results, safe work, and honest pricing.
📞 Call or WhatsApp Now: 7009679903
Send your site photos on WhatsApp and get a free quote today.
Conclusion
Choosing the right roof cutting service in Sant Ravidas Nagar protects your building, saves rework, and gives you a clean, accurate opening on the first attempt. With modern diamond equipment, trained operators, clear pricing, and strong safety practices, Core Cutting India is ready to handle homes, factories, and commercial projects across Bhadohi and nearby cities. Call 7009679903 now to discuss your project.
