Khatima sits at the edge of the Terai, close to the Nepal and Uttar Pradesh borders, with the hills of Champawat just a short drive away. It is a trading town with busy bazaars, farming families, small industries and a growing number of new houses and showrooms. As the town expands, so do the needs of its buildings.
Maybe you want a staircase to your terrace. Maybe a lift in a new nursing home, an opening for a machine in a workshop, or a hatch for a water tank. In every case, you need a trusted roof cutting service in Khatima that can cut concrete cleanly without harming the building. Core Cutting India uses diamond-blade machines that cut RCC roofs and slabs with little noise, almost no vibration and low dust.
Call or WhatsApp: 7009679903 | Email: [email protected]
Quick answer: Roof cutting in Khatima means using a diamond saw to cut a marked section of an RCC roof for stairs, lifts, tanks, skylights or pipes. Prices usually start at about ₹80 per running foot for thin slabs. The final cost depends on slab thickness, steel, access and total cutting length.
What Is Roof Cutting?
Roof cutting is the planned removal of a section of a concrete roof or slab. A diamond blade, wall saw or wire saw slices along a pre-marked line, cutting through both concrete and steel bars inside.
Compared with manual breaking, this method is straighter, faster and gentler on the building. For busy markets and residential lanes in Khatima, it also means much less disturbance for neighbours.
Why Khatima Property Owners Need Roof Cutting
Khatima's building styles are varied. You will find old market buildings, modern showrooms, school campuses, farm-linked warehouses and new housing colonies. Common reasons for roof cutting here:
- Adding a second or third floor to a house or shop
- Terrace access with a new staircase
- Lift installation in hospitals, hotels and multi-storey homes
- Water tank and solar heater hatches
- Industrial openings for machines, pipes and conveyors
- Ventilation openings in storage halls and cold stores
- Repair work, removing damaged or leaking slab sections
Our Roof Cutting Services in Khatima
Staircase Opening Cutting
We cut accurate openings for terrace and inter-floor stairs based on your drawing.
Lift Shaft Cutting
Clean rectangular openings for home lifts, goods lifts and hospital lifts.
Roof Hatch Cutting
Small and medium openings for tanks, solar panels and maintenance access.
Wall Saw Cutting
Rail-guided saws give long, deep, straight cuts in thick slabs and walls.
Diamond Wire Saw Cutting
When slabs are very thick or machines cannot fit, wire saws can reach and cut cleanly.
Core Cutting
Round holes for plumbing, drainage, AC pipes, cables and exhaust fans. See all services on corecuttingindia.com.
Controlled Partial Demolition
We cut damaged or unsafe roof sections into safe blocks and remove them in a controlled manner.
Industrial and Commercial Cutting
Openings in factory slabs, showroom roofs, warehouse floors and school buildings.
Roof Cutting Cost in Khatima
Here is a practical guide to help you plan your budget.
| Work Type |
Indicative Rate |
| Thin RCC roof (up to 6 inch) |
₹80 – ₹150 per running foot |
| Thick slab (6–12 inch) |
₹150 – ₹260 per running foot |
| Wall saw cutting |
₹120 – ₹300 per running foot |
| Core cutting |
₹150 – ₹800 per hole, by diameter |
| Wire saw cutting |
Quoted after site visit |
| Minimum charge for small jobs |
₹3,500 – ₹5,500 |
These are approximate rates. Your final price depends on your actual site.
What Decides the Final Price?
- Slab thickness
- Steel density inside the slab
- Total cutting length
- Roof height and machine access
- Water and power supply
- Distance from our team to your site
For a quick estimate, try our rate calculator or share photos and measurements on WhatsApp.
Our Working Process
Step 1: Enquiry. Call or WhatsApp with your Khatima location and requirement.
Step 2: Site visit. We inspect the slab, nearby walls and access.
Step 3: Marking. We draw cut lines on the roof. You approve before we start.
Step 4: Quotation. You get a clear written price.
Step 5: Preparation. We set up water, floor protection and supports.
Step 6: Cutting. The diamond blade cuts along the marked line, cooled by water.
Step 7: Safe removal. Slab pieces are secured and lowered.
Step 8: Clean-up. We clear debris and hand over a work-ready site.
Technology We Use
- Diamond wall saws for precise, deep cuts
- Wire saws for large and awkward sections
- Hand-held ring saws for corners and edges
- Core drilling machines for round holes
- Water-cooling systems for dust and heat control
- Electric and hydraulic power units for stable performance
The diamond segments grind concrete in fine particles. This keeps the edge neat and the structure stable.
Safety and Care
Your roof is part of your building's strength, so we follow safe practices:
- Slab inspection before cutting
- Supports where needed
- Barricaded work area
- Helmets, gloves, goggles and safety shoes for operators
- Safe electrical setup around water
- Controlled lifting of cut sections
Please note: If your slab is load-bearing or the building is old, consult a structural engineer before fixing the opening position. We are happy to coordinate with your engineer or architect.
Why Choose Core Cutting India?
- Quick work that saves time and labour
- Low vibration that protects your building
- Neat edges that reduce finishing work
- Clear rates given before work begins
- Quick response on call and WhatsApp
- Experience with homes, shops, factories and institutions
- Plain communication in Hindi and English
Diamond Cutting vs Hammer Breaking
| Point |
Diamond Cutting |
Hammer Breaking |
| Vibration |
Very low |
High |
| Dust |
Low |
Heavy |
| Noise |
Moderate |
Very loud |
| Edge |
Straight and tidy |
Rough |
| Risk to beams and walls |
Low |
High |
| Time |
Short |
Long |
| Repairs after |
Minimal |
Often needed |
Where We Serve in and Around Khatima
We provide roof cutting, slab cutting and core cutting in Khatima and nearby places:
- Khatima main market and Tanakpur Road
- Jhankat
- Sitarganj
- Banbasa
- Tanakpur
- Nanakmatta
- Kichha and Rudrapur
- Champawat and Lohaghat
- Pilibhit and Lakhimpur Kheri side
- Haldwani and Kashipur for larger projects
Slab Cutting in Other Cities
We also work in other parts of Uttarakhand. Visit these local pages:
We also take projects in Dehradun, Haridwar, Rishikesh, Nainital, Almora and more. Message us to confirm availability.
Typical Use Cases in Khatima
- Home owners: Terrace stairs or a new floor connection
- Shop owners: Upper-floor openings for storage or display
- Hospitals and clinics: Lift and pipe openings
- Schools: Fire-exit stairs and utility openings
- Warehouses and cold stores: Ventilation and machine openings
- Factories: Pipeline, conveyor and crane openings
- Hotels and banquet halls: Duct and kitchen exhaust holes
- Old buildings: Removal of cracked or leaking slab sections
Tips Before You Book
- Confirm the opening size and location.
- Share drawings or photos for a faster quote.
- Consult your engineer about beam layout.
- Plan around peak summer heat to protect working conditions.
- Avoid heavy monsoon days for easier access.
- Ensure power and water are available.
- Get the quote in writing, including travel.
FAQs: Roof Cutting Service in Khatima
1. What is the cost of roof cutting service in Khatima?
Roof cutting in Khatima usually costs between ₹80 and ₹300 per running foot, depending on slab thickness, steel, access and length. Small jobs have a minimum charge. Call 7009679903 for a free estimate.
2. Is roof cutting safe for my building?
Yes. Diamond cutting causes very little vibration, so it does not shake the structure. For load-bearing slabs, get a structural engineer to approve the opening.
3. How long does roof cutting take?
A standard staircase or tank opening takes a few hours to one day. Thicker slabs or larger openings take longer. We confirm timing after checking your site.
4. Can you cut roofs in factories and warehouses near Sitarganj and Khatima?
Yes. We handle homes, shops, factories and warehouses in Khatima, Sitarganj, Banbasa, Tanakpur and nearby areas. Call or WhatsApp 7009679903 to check availability.
5. Will cutting create too much dust and noise?
No. Water-cooled diamond cutting creates much less dust and noise than hammer breaking. It suits occupied homes, shops and schools.
6. What is the difference between roof cutting and slab cutting?
Roof cutting means cutting the top slab of a building. Slab cutting covers any concrete slab, including floors. The machines and method are the same.
7. Can you cut a roof in an old building in Khatima?
Yes. We inspect the slab first and use controlled cutting and supports to protect the remaining structure. A structural engineer's advice is recommended for old buildings.
8. How do I book a roof cutting service in Khatima?
Call or WhatsApp 7009679903, or email [email protected]. Share your location, slab thickness and opening size. We will arrange a free site check and quote.
Conclusion: Book a Dependable Roof Cutting Service in Khatima
Whether you are upgrading a home, expanding a shop or setting up a factory floor, your roof opening should be clean, safe and exact. With diamond-blade machines, careful marking and honest pricing, Core Cutting India delivers a reliable roof cutting service in Khatima that protects your property and saves you time.
Send us your measurements and a photo, and we will reply with a quick estimate.
📞 Call: 7009679903
