Few places in Uttarakhand have a story like Tehri. The old town now rests beneath the waters of the Tehri Lake, and New Tehri, built on the hills above, has become a planned town of offices, schools, homes and markets. Around the lake, resorts, camps and homestays have grown. Along the roads to Chamba, Dhanaulti and Kunjapuri, new buildings keep appearing.
All these buildings need updates. A lift for a lake-view resort. A staircase to a rooftop café. A skylight for a hill cottage. A hatch for a tank. Each starts with an opening in a concrete roof. A skilled roof cutting service in Tehri can make it without shaking the building.
Core Cutting India uses diamond-blade machines to cut RCC roofs and slabs cleanly. No hammering, very little dust and almost no vibration.
Call or WhatsApp: 7009679903 | Email: [email protected]
Quick answer: Roof cutting in Tehri means using a diamond saw to cut a marked part of an RCC roof for stairs, lifts, skylights, tanks or pipes. Rates usually start at about ₹90 per running foot for thin slabs. Slab thickness, steel, hill access and distance decide the final price.
What Is Roof Cutting?
Roof cutting is the planned removal of part of a concrete roof or slab. A diamond blade, wall saw or wire saw cuts along a line you have approved, passing through concrete and steel bars in one clean motion.
It replaces the old method of hammering, which is loud, dusty and risky for the building.
Why Tehri Buildings Need Gentle Cutting
Tehri district lies in a seismically sensitive Himalayan zone. Many buildings stand on slopes, near the lake or along hill roads. New Tehri itself was planned with modern structures, and many older concrete buildings across the district have served families for years.
Here is why machine cutting suits Tehri:
- Low vibration protects beams, columns and nearby walls.
- Quiet working is good for resorts, schools and offices in use.
- Compact machines reach terraces on steep plots.
- Controlled removal keeps debris from falling onto roads and slopes.
- Fast completion helps you finish between rain spells.
Our Roof Cutting Services in Tehri
Resort and Hotel Roof Openings
Lift shafts, stair openings, rooftop restaurant access and duct holes for lakeside resorts, camps and hotels.
Staircase Opening Cutting
The most common request in homes. We cut an exact opening for a terrace or inter-floor stair.
Skylight and Ventilation Cutting
Bring in light and air, especially useful in cold hill homes.
Roof Hatch and Tank Access
Neat openings for water tanks, solar water heaters and service routes.
Wall Saw Cutting
Rail-guided saws make long, deep, straight cuts through thick slabs and walls.
Diamond Wire Saw Cutting
For very thick or awkward sections where large machines cannot fit.
Core Cutting
Round holes for plumbing, drains, chimneys, heater lines and cables. Explore more at corecuttingindia.com.
Controlled Slab Removal
Cracked, leaking or damaged portions are cut into manageable blocks and removed carefully.
Roof Cutting Cost in Tehri
Here is a simple guide to help you plan.
| Type of Work |
Indicative Rate |
| Thin RCC roof (up to 6 inch) |
₹90 – ₹160 per running foot |
| Thick slab (6–12 inch) |
₹160 – ₹280 per running foot |
| Wall saw cutting |
₹130 – ₹320 per running foot |
| Core cutting |
₹150 – ₹900 per hole, by size |
| Wire saw cutting |
Quoted after site visit |
| Hill transport |
Added by distance |
| Minimum charge, small jobs |
₹4,000 – ₹6,000 |
These are approximate rates for planning. Your final price depends on your site.
What Affects the Price?
- Slab thickness
- Steel quantity
- Total cutting length
- Road access and carrying distance
- Floor height
- Water and power supply
- Season and weather
For a quick estimate, use our rate calculator or send photos and measurements on WhatsApp.
How Our Process Works
Step 1: Contact us. Call or WhatsApp with your Tehri location and needs.
Step 2: Site visit. We inspect the slab, beams and access route.
Step 3: Marking. Cut lines are drawn. You approve them first.
Step 4: Quote. A clear, written price.
Step 5: Setup. We arrange water supply, floor cover and slab supports.
Step 6: Cutting. A water-cooled diamond blade follows the marked line.
Step 7: Removal. Pieces are secured and lowered with control.
Step 8: Clean-up. We clear debris and leave the area ready for your next stage.
Equipment and Technology
- Diamond wall saws for precise, straight cuts
- Wire saws for heavy or irregular sections
- Ring saws for corners and tight spaces
- Core drilling machines for round holes
- Water-cooling systems for dust and heat control
- Electric and hydraulic power units for steady cutting
Diamond grinds concrete instead of striking it, so the cut stays straight and the structure stays calm.
Safety Practices
- Slab condition checked before cutting
- Supports used where needed
- Work area barricaded
- Operators wear helmets, gloves, goggles and safety shoes
- Safe electrical connections near water
- Controlled lifting of cut sections
Important: In a seismic hill region, consult a structural engineer before cutting a load-bearing roof or deciding the opening size. We are happy to coordinate with your engineer or architect. Near the lake, also check any local rules that may apply to your plot.
Benefits of Choosing Core Cutting India
- Very low vibration, ideal for hill buildings
- Less dust and noise, good for resorts and homes in use
- Neat edges that cut finishing costs
- Quick turnaround on standard openings
- Clear pricing before work begins
- Easy contact by call, WhatsApp and email
- Experience with homes, resorts, institutions and commercial sites
Diamond Cutting vs Manual Breaking
| Point |
Diamond Cutting |
Manual Breaking |
| Vibration |
Minimal |
Heavy |
| Dust |
Low |
High |
| Noise |
Moderate |
Very loud |
| Edge quality |
Straight |
Uneven |
| Risk to structure |
Low |
High |
| Time |
Short |
Long |
| Repair after |
Little |
Often needed |
Where We Serve Around Tehri
We provide roof cutting, slab cutting and core cutting in Tehri and nearby places:
- New Tehri town and the Tehri Lake area
- Koteshwar and Pratapnagar
- Chamba and Kunjapuri
- Dhanaulti and Surkanda Devi road
- Ghansali and Lambgaon
- Narendranagar and Kirtinagar
- Devprayag and Srinagar Garhwal
- Mussoorie and Uttarkashi side
- Rishikesh and Dehradun for larger projects
Slab Cutting in Other Cities
We also serve other parts of Uttarakhand. Visit these local pages:
We also take projects in Haridwar, Nainital, Almora, Pauri and more. Message us to confirm availability.
Common Use Cases in Tehri
- Lakeside resorts: Lift openings and rooftop dining stairs
- Homestays and camps: Terrace access and skylights
- Family homes: Upper-floor connections
- Shops and offices: Upper-floor access and storage openings
- Government buildings and schools: Lift shafts and fire-exit stairs
- Hospitals and clinics: Lift and pipe openings
- Restaurants and cafés: Chimney and exhaust holes
- Old buildings: Removal of leaking or damaged slab sections
Tips Before You Book
- Fix the opening size and exact position.
- Keep a drawing or photos ready.
- Ask your engineer about beams and load path.
- Plan around tourist season and weekend traffic to Dhanaulti.
- Avoid heavy monsoon days, when hill roads can be unstable.
- Arrange water and power at roof level.
- Get the quote in writing, including transport.
FAQs: Roof Cutting Service in Tehri
1. What is the cost of roof cutting service in Tehri?
Roof cutting in Tehri usually costs between ₹90 and ₹320 per running foot, depending on slab thickness, steel, access and length. Hill transport may be added. Call 7009679903 for a free estimate.
2. Is roof cutting safe in a seismic hill area like Tehri?
Yes, when done with diamond machines. They cause very little vibration. For load-bearing slabs, a structural engineer should approve the opening.
3. How long does roof cutting take?
A standard staircase or tank opening takes a few hours to a day. Thicker slabs and larger openings take longer. We confirm timing after seeing your site.
4. Do you provide roof cutting in New Tehri, Chamba and Dhanaulti?
Yes. We serve Tehri, New Tehri, Chamba, Dhanaulti, Ghansali, Narendranagar and nearby areas. Call or WhatsApp 7009679903 to check availability.
5. Can you work at a resort near the lake while guests are staying?
In most cases, yes. Water-cooled diamond cutting is quieter and cleaner than breaking. We can plan work around guest schedules.
6. What is the difference between roof cutting and slab cutting?
Roof cutting means cutting the top slab of a building. Slab cutting covers any concrete slab, including floors. The machines and method are the same.
7. Can you cut a roof in an old house?
Yes. We inspect the slab first and use supports and controlled cutting to protect the remaining structure. An engineer's advice is recommended for old buildings.
8. How do I book a roof cutting service in Tehri?
Call or WhatsApp 7009679903, or email [email protected]. Share your location, slab thickness and opening size. We will arrange a free site check and quote.
Conclusion: Book a Trusted Roof Cutting Service in Tehri
From planned homes in New Tehri to resorts by the lake and cottages on the road to Dhanaulti, every roof deserves careful handling. With diamond-blade machines, thoughtful planning and honest rates, Core Cutting India delivers a dependable roof cutting service in Tehri that protects your building and your peace of mind.
Send us your measurements and a photo, and we will reply with a quick estimate.
📞 Call: 7009679903
