Walk through Munirka and you will notice one thing quickly. Buildings here grow upwards. Four, five or even six floors packed with PGs, rented flats, small offices and shops, all standing close together. When owners want to add a staircase, install a lift or open up a dark corridor, the roof slab has to be cut. And in a crowded locality like this, it must be done with great care.
A professional roof cutting service in Munirka solves this problem. At Core Cutting India, we use diamond saws and wire saws that cut reinforced concrete in clean, measured lines. There is no heavy pounding, so tenants, neighbours and the building itself stay undisturbed.
We work in Munirka Village, Munirka Vihar, Vasant Vihar, RK Puram, Vasant Kunj, Mahipalpur and nearby parts of South West Delhi. Whether you own a single house or a multi-floor rental building, we can plan and complete your roof opening safely.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator
At a Glance: Roof Cutting in Munirka
| Question |
Short Answer |
| What is it? |
Cutting a measured opening in a concrete roof using diamond tools |
| Typical cost |
₹95 – ₹270 per running foot |
| Time for a staircase opening |
About 4 to 8 hours |
| Dust and noise |
Low, because of water-cooled cutting |
| Is it safe? |
Yes, with proper planning and supports |
| Free site visit? |
Yes |
Why Roof Cutting Is So Common in Munirka
Munirka is close to JNU, IIT Delhi, Vasant Vihar and the Munirka Metro station. Demand for rooms is high, so owners keep extending their buildings or improving access. This is why roof cutting requests are very common here.
Typical needs include:
- Adding a new floor: A fresh staircase opening is needed in the roof slab.
- Installing a lift: Tenants prefer buildings with lifts, so owners add a shaft.
- Improving light: Inner rooms and corridors get dark. A skylight or light well helps.
- Fire safety access: Terrace doors and escape stairs are added.
- Services and ducts: Plumbing, AC, exhaust and cable routes need openings.
- Renovation: Old or damaged slab sections are removed and recast.
Our Roof Cutting Services in Munirka
Staircase Opening in Slab
We cut a straight, correctly sized opening in your roof so the staircase can be built or fitted without extra demolition.
Lift Shaft Opening
Our team cuts shaft openings with square corners and exact dimensions, following your lift vendor's drawing.
Skylight and Light Well
A neatly cut skylight brings daylight into dark corridors and stairwells, saving electricity and making rooms feel larger.
Terrace Access and Fire Exit
Many buildings need a safe exit route to the terrace. We make a clean opening for stairs, doors or hatches.
Ventilation and Exhaust Cutting
Kitchens, café units and small workshops need proper exhaust. We cut openings for fans, chimneys and ducts.
Pipe, Duct and Cable Holes
We make round and rectangular openings for water pipes, drainage, AC lines and wiring. For other Delhi areas, see our local pages like Karol Bagh and Pitampura.
Partial Slab Removal
If a section of the roof is cracked or being rebuilt, we remove it in controlled blocks.
Wall Cutting
New doors, windows and passages are cut using a wall saw for a clean finish.
How Our Roof Cutting Process Works
1. Share Your Requirement
Message us on WhatsApp at 7009679903 with your location, a few photos and the size of the opening you want.
2. Site Inspection
Our technician checks slab thickness, steel direction, nearby beams and columns, floor height and access for machines.
3. Price and Plan
We give you a clear quote, time estimate and work plan. You can also get an early idea from the rate calculator.
4. Preparation
We protect the floor below, set up props if needed, arrange water and mark the cutting lines.
5. Cutting Work
The operator cuts along the marked lines. We divide large openings into smaller blocks to make lowering safe.
6. Cleanup
Debris is removed, the area is cleaned, and the opening is handed over ready for finishing.
Technology Behind Clean Cuts
We choose the equipment based on your slab, not the other way round.
- Wall saw: For deep, straight cuts in thick roofs and beams.
- Floor saw: For flat slabs where the machine can sit on the surface.
- Diamond wire saw: For heavy or hard-to-reach concrete.
- Core drilling machine: For round holes in different sizes.
- Hand-held diamond saw: For corners and finishing.
- Water-cooling system: Keeps dust down and protects the blade.
Diamond segments grind through concrete and steel together. The result is a smooth edge and a calm building.
Safety: How We Protect Your Building and Tenants
In a PG or rental building, many people live below the roof you are cutting. Safety must come first.
- Structural study: We check beams, columns and slab span before marking.
- Temporary support: Props are installed under large openings.
- Service check: Electric wiring, water pipes and gas lines are identified first.
- Clear zone: The area below the cut is emptied and barricaded.
- Worker protection: Helmets, gloves, masks, goggles and ear protection are used.
- Water control: Slurry is managed so it does not leak into rooms below.
- Controlled lowering: Cut blocks are lowered slowly with ropes or hoists.
- Engineer guidance: For big structural changes, a structural engineer's advice is recommended.
Roof Cutting Cost in Munirka: Price Guide for 2026
Many owners ask, "What is the rate per foot for slab cutting?" Here is a simple guide.
| Type of Work |
Indicative Cost |
| Slab cutting up to 6 inches thick |
₹95 – ₹165 per running foot |
| Slab cutting 6 to 12 inches thick |
₹165 – ₹270 per running foot |
| Wall saw cutting |
₹100 – ₹200 per running foot |
| Core holes |
Per hole, based on size and depth |
| Small job |
Minimum charge applies |
These are approximate prices. The final quote is shared after inspection.
Why Prices Differ from One Building to Another
- Thick slabs take more time and blade wear.
- Dense steel slows the cut.
- Longer cutting lines cost more.
- Higher floors need extra lifting effort.
- Narrow lanes increase handling time.
- Debris removal may need extra labour.
Simple Ways to Control Your Budget
- Finalise the opening size beforehand.
- Combine roof, wall and core cutting in a single visit.
- Keep the work area clear.
- Tell us in advance about stairs, lanes and water access.
Who Hires Roof Cutting in Munirka?
- PG and hostel owners adding lifts, light wells and terrace access
- House owners extending their building vertically
- Shop and showroom owners creating mezzanine floors or service ducts
- Café and restaurant owners building rooftop seating and exhaust systems
- Builders and contractors handling renovation and extension work
- Architects and engineers who need precise cuts as per drawings
- Society and RWA committees upgrading older buildings
Diamond Cutting vs. Breaker Method
| Point |
Diamond Cutting |
Breaker Method |
| Vibration |
Very low |
Very high |
| Impact on tenants |
Minimal |
High disturbance |
| Cracks in nearby walls |
Rare |
Common |
| Edge quality |
Smooth and straight |
Rough |
| Dust |
Controlled with water |
Heavy |
| Extra repair work |
Little |
Plenty |
| Best for crowded buildings |
Yes |
No |
Local Know-How: Why It Matters in Munirka
Munirka has tight lanes, parked vehicles and buildings built close together. Machines and blocks must be moved by hand in many cases. Our team is used to:
- Bringing compact equipment through narrow gates
- Working in buildings with limited water pressure
- Keeping tenants informed and comfortable
- Planning work hours to reduce disturbance
- Coordinating with masons, lift companies and architects
Because we work across South and West Delhi regularly, we reach your site quickly and plan the job well.
Areas We Serve Near Munirka
- Munirka Village and Munirka Vihar
- Vasant Vihar and Vasant Kunj
- RK Puram (Sectors 1 to 13)
- JNU Area and IIT Delhi Surroundings
- Mahipalpur and Aerocity
- Hauz Khas and Saket
- Delhi Cantonment and Palam
- Dwarka and Janakpuri
Looking for core cutting in other parts of Delhi? Visit these pages:
We Also Serve Other Cities
Our services are available in Gurugram, Noida, Greater Noida, Ghaziabad, Faridabad, Sonipat, Panipat, Meerut, Chandigarh, Ludhiana, Jaipur and other North Indian cities. Call 7009679903 to confirm availability in your city.
Why People Trust Core Cutting India
Experience: We handle roof, wall and slab cutting for homes, rentals, shops and industrial units.
Expertise: We use professional diamond equipment and plan each cut before starting.
Authority: Roof cutting is one of several concrete cutting services we provide, along with core cutting and wall cutting.
Trust: We give the price early, explain the method clearly and tell you honestly if an engineer should check the structure first.
Checklist Before You Book
- [ ] Decide the size and location of the opening
- [ ] Keep drawings, photos or measurements ready
- [ ] Take your engineer's opinion for large openings
- [ ] Inform tenants or neighbours in advance
- [ ] Keep water and electricity available
- [ ] Decide where cut blocks will be stored or loaded
What Clients Say
"We wanted to add a lift in our PG building. The team measured carefully, cut neatly and the tenants hardly felt any shaking." – PG owner, Munirka
"They finished our staircase opening in a single day, and the site was clean at the end." – Homeowner, Vasant Vihar
(Replace with verified reviews before publishing.)
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Munirka?
Roof cutting in Munirka typically costs ₹95 to ₹270 per running foot, depending on slab thickness, steel and access. You get an exact quote after a free site visit.
2. Is roof cutting safe in a multi-storey building?
Yes, if it is done with diamond tools and proper supports. This method creates very little vibration, so nearby walls and floors remain safe. For large openings, consult a structural engineer.
3. How long does roof cutting take?
A normal staircase opening takes about 4 to 8 hours. A lift shaft or thick slab may take one to two days.
4. Can you cut a roof while tenants are living in the building?
Yes. Diamond cutting is quiet and clean enough for occupied buildings. We also barricade the area below and plan timings to reduce disturbance.
5. Do you provide roof cutting near JNU, Vasant Vihar and RK Puram?
Yes. We serve Munirka and nearby areas, including Vasant Vihar, RK Puram, Vasant Kunj, Mahipalpur and Hauz Khas.
6. Can you cut slabs with steel reinforcement?
Yes. Our diamond blades cut concrete and steel bars together along the marked line.
7. Do I need permission to cut my roof?
For small changes in your own house, it is usually fine. For structural changes or multi-storey buildings, check local rules and consult an engineer.
8. How can I book roof cutting service in Munirka?
Call or WhatsApp 7009679903, or email [email protected] with your location, photos and opening size. We will arrange a free site visit.
Conclusion: Get Reliable Roof Cutting Service in Munirka
Munirka's buildings are crowded, busy and growing fast. That makes accurate, low-vibration cutting more important than ever. With diamond tools, trained operators and honest pricing, Core Cutting India offers a dependable roof cutting service in Munirka for PGs, homes, shops and commercial buildings.
Tell us what you plan to open, and we will cut it cleanly and safely.
📞 Call or WhatsApp today: 7009679903
✉️ [email protected] 🌐 corecuttingindia.com 🧮 Check your estimate here
Free site visit. Clear rates. Trusted service in Munirka and across Delhi NCR.
