Need a roof cutting service in Nehru Place? Core Cutting India cuts RCC roofs and slabs with diamond tools. There is no hammering, no cracks in the rest of your building, and very little dust or noise. Our team visits your site, measures the job, and gives you a clear quote on the same day.
📞 Call or WhatsApp: 7009679903 📧 Email: [email protected] 🧮 Get your rate in 2 minutes: Rate Calculator
What Is Roof Cutting?
Roof cutting is the process of cutting an opening or a section out of a concrete roof or slab using diamond-tipped equipment. It is used to make space for a staircase, lift, skylight, duct, water tank, or a new floor connection. Unlike breaking with a hammer, diamond cutting gives straight, clean edges and does not shake the structure.
Typical roof cutting cost in Nehru Place and Delhi NCR: ₹80 to ₹250 per running foot, depending on slab thickness, steel reinforcement and access. Most small openings cost between ₹6,000 and ₹25,000. Use our online rate calculator for a closer estimate.
Why Nehru Place Property Owners Choose Us
Nehru Place is one of South Delhi's busiest commercial hubs. Offices, IT shops, clinics, showrooms and older residential buildings stand very close together. A noisy demolition here means complaints from neighbours, shop owners and the market association.
That is why most people look for a careful roof cutting service in Nehru Place rather than the cheapest one. We work in a controlled way, and we understand tight lanes, basement parking, narrow staircases and building society rules.
What you get with us:
- Low vibration cutting that protects beams, columns and old plaster
- Straight, neat edges that need little finishing work
- Less dust and noise because we use water-cooled cutting
- Quick site visit across Nehru Place and nearby areas
- Transparent pricing with no surprise charges after the work starts
- Trained operators who follow safety steps on every site
Our Roof Cutting Services in Nehru Place
1. RCC Roof and Slab Cutting
We cut reinforced concrete roofs of any normal thickness, including steel bars inside the slab. This is the most common request from Nehru Place building owners.
2. Staircase Opening in Roof
Adding a staircase to the terrace or a new floor? We cut the exact opening size you need, with clean edges for easy railing and finishing.
3. Lift Shaft Opening Cutting
Retrofitting a lift in an old building is difficult. Our controlled cutting lets you make the shaft opening without harming the surrounding structure.
4. Skylight and Ventilation Openings
We cut openings for skylights, exhaust fans, and light wells so your office or shop gets natural light and fresh air.
5. Duct, Pipe and AC Line Openings
Commercial buildings often need openings for HVAC ducts, plumbing, fire pipes, and cable trays. We cut round or square holes of the size you ask for.
6. Terrace Slab Removal
If you need to remove a portion of the terrace for a water tank, solar structure, or redesign, we cut it into sections that can be lifted out safely.
7. Core Drilling Through Roofs
For smaller holes, we use core drilling machines that make perfect round holes from 25 mm up to large diameters.
How Roof Cutting Works: Our Step-by-Step Process
We keep the process simple, so you always know what is happening on your property.
Step 1: Free Enquiry and Site Visit
Call or WhatsApp us on 7009679903. Share a photo of the roof, the size of the opening, and your location. If needed, our team visits the site in Nehru Place the same day or the next day.
Step 2: Inspection and Marking
We check the thickness of the slab, the position of beams and columns, and the steel layout. We then mark the cut lines clearly and confirm them with you.
Step 3: Safety Setup
We protect the floor below, set up supports where needed, and keep the area clear of people. Water supply and power points are arranged.
Step 4: Diamond Cutting
Using a wall saw, wire saw, slab saw or core drill, our operators make the cuts along the marked lines. Water keeps the blade cool and controls dust.
Step 5: Section Removal
The cut piece is either lifted out in blocks or broken down in a controlled way. Heavy pieces are handled with proper lifting arrangements.
Step 6: Cleaning and Handover
We clean the site, remove slurry, and leave you with a neat opening that is ready for the next stage of work.
Technology and Equipment We Use
Good results come from the right machine for the job. Here is what we use:
| Equipment |
Best For |
Why It Helps |
| Slab / Floor Saw |
Straight cuts in flat roofs |
Fast, accurate cuts |
| Wall Saw |
Thick slabs, large openings |
Deep cuts with low vibration |
| Wire Saw |
Very thick or hard-to-reach concrete |
Cuts almost any size and shape |
| Core Drilling Machine |
Round holes for pipes and ducts |
Clean, exact holes |
| Hand Saw (Diamond) |
Small corrections and corners |
Flexible for tight spots |
All cutting uses diamond blades or wires, which cut through both concrete and steel bars. This is why the edges come out smooth and strong.
Roof Cutting vs Breaking with Hammer: Which Is Better?
Many owners ask this before they start. Here is an honest comparison.
| Point |
Diamond Roof Cutting |
Hammer Breaking |
| Vibration |
Very low |
High |
| Risk of cracks in building |
Minimal |
High |
| Noise |
Low to moderate |
Very high |
| Dust |
Controlled with water |
Heavy |
| Edge finish |
Clean and straight |
Rough and uneven |
| Neighbour complaints |
Rare |
Common |
| Best for |
Offices, shops, old buildings |
Open demolition only |
In a crowded place like Nehru Place, diamond cutting is almost always the smarter choice.
Roof Cutting Cost in Nehru Place: Pricing Guide
Many people search for "roof cutting cost per sq ft" or "roof cutting charges in Delhi." The honest answer is that price depends on the job. Here are the main factors:
- Slab thickness: A 4-inch slab costs less than an 8-inch slab
- Steel reinforcement: More bars mean more cutting time
- Size and shape of the opening
- Floor level and access: Higher floors or narrow access may add handling cost
- Working hours: Night or weekend work for offices may cost extra
- Debris removal: Taking away the broken concrete is charged separately in most cases
Indicative Price Range (Delhi NCR)
| Type of Work |
Approximate Cost |
| Roof cutting (per running foot) |
₹80 – ₹250 |
| Small opening (2 ft × 2 ft) |
₹4,000 – ₹8,000 |
| Staircase opening |
₹15,000 – ₹45,000 |
| Core drilling (per hole) |
₹500 – ₹3,500 |
| Debris removal |
Quoted as per quantity |
These are indicative rates and may change after site inspection. For a close estimate, use our Rate Calculator or send us details on WhatsApp.
Tip: Ask every contractor whether the quote includes labour, machine, water, power and cleaning. A low price can become expensive when these are added later.
Who Needs Roof Cutting Service in Nehru Place?
Office and IT Spaces
Companies add staircases, internal links between floors, or duct openings for new AC systems.
Shops and Showrooms
Retailers expand to a new level or create double-height display areas.
Residential Owners
Families add terrace access, skylights, or lifts for elderly members.
Builders and Contractors
Renovation and structural alteration projects often need precise slab cutting.
Hospitals and Clinics
These sites need low-noise, low-dust cutting that does not disturb patients.
Benefits of Choosing Core Cutting India
Protects Your Building
Because we do not hammer the slab, the rest of your structure stays safe. This matters a lot in older buildings around Nehru Place, Kalkaji and Govindpuri.
Saves Time
Diamond cutting is faster than traditional breaking, and there is less cleaning and repair work later.
Saves Money in the Long Run
Clean edges mean less plastering and fewer repairs. Fewer cracks mean fewer structural worries.
Safe for People
Controlled cutting means fewer flying chips and less risk to workers and occupants.
Peaceful Work
Low noise means your neighbours, tenants and staff are not disturbed all day.
Safety Standards We Follow
Safety is not optional on a roof cutting job. Our team follows these basics on every site:
- Checking the structure before any cut begins
- Using temporary supports where the slab may shift
- Wearing helmets, gloves, safety shoes, goggles and ear protection
- Keeping electrical connections safe near water
- Cordoning off the area below the cutting zone
- Cutting in planned sections so no piece falls unexpectedly
- Cleaning slurry and debris immediately
If your building needs a structural engineer's approval, we are happy to work with your engineer. For major openings in load-bearing areas, we always suggest getting an engineer's opinion first.
Areas We Serve Near Nehru Place
We provide roof cutting service across South and Central Delhi. If you are in or near these places, we can reach you quickly:
- Nehru Place and Nehru Place Market
- Nehru Enclave
- Kalkaji
- Govindpuri
- Okhla Industrial Area
- Greater Kailash (GK-1 and GK-2)
- Chittaranjan Park (CR Park)
- East of Kailash
- Kailash Colony
- Lajpat Nagar
- Defence Colony
- Sarita Vihar
- Jasola
- Tughlakabad
- Sarojini Nagar
- Rajouri Garden
Looking for other cutting work nearby? Explore our related services:
Roof Cutting Service in Other Cities
Our work is not limited to Delhi. We also provide concrete cutting and roof cutting service in:
- Gurugram – offices, towers and independent floors
- Noida and Greater Noida – commercial and residential projects
- Ghaziabad – housing societies and factories
- Faridabad – industrial and residential sites
- Chandigarh, Mohali and Panchkula – homes and commercial spaces
- Ludhiana, Jalandhar and Amritsar – Punjab projects
- Jaipur – renovation and commercial work
To check availability in your city, WhatsApp us on 7009679903.
Why Trust Us? (Our Experience and Approach)
We are a specialist concrete cutting team. Our focus is on cutting, core drilling and structural openings, not general construction. Here is how we build trust with every client:
- Clear communication: We explain the process, time and cost before starting.
- No guesswork: We inspect the slab first and give honest advice, even if it means saying a job should not be done.
- Respect for your property: We cover, protect and clean the area.
- Trained operators: Machines are only handled by experienced staff.
- Customer-first service: You can call us directly and speak to someone who knows the work.
Tips Before You Book a Roof Cutting Contractor
- Get the plan approved. If the opening affects a beam or column, talk to a structural engineer.
- Check permissions. In societies and commercial complexes, take permission from the RWA or building management.
- Decide the exact size. Changing size mid-job increases cost.
- Ask about debris removal. Know who will take the waste away.
- Compare methods, not just prices. Hammer breaking may look cheaper but can lead to cracks and repair bills.
- Share photos on WhatsApp. It helps us give a faster, more accurate quote.
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Nehru Place?
Roof cutting in Nehru Place usually costs ₹80 to ₹250 per running foot. The final price depends on slab thickness, steel inside the slab, and site access. Small openings often fall between ₹6,000 and ₹25,000. Use our rate calculator or call 7009679903 for an exact quote.
2. Is roof cutting safe for an old building?
Yes, when done by trained professionals. Diamond cutting creates very little vibration, so it does not shake the structure like a hammer or breaker. For large openings in old buildings, we recommend a quick check by a structural engineer.
3. How long does it take to cut a roof slab?
A small opening usually takes 2 to 4 hours. A staircase or lift opening can take one day or more, depending on slab thickness and size. We confirm the time during the site visit.
4. Can you cut an RCC roof without damaging the rest of the slab?
Yes. Diamond wire saws and slab saws cut along exact lines, leaving the surrounding slab untouched. This is the main reason owners choose cutting over breaking.
5. Do you provide roof cutting service near me in South Delhi?
Yes. We serve Nehru Place, Kalkaji, Greater Kailash, Lajpat Nagar, Okhla, Govindpuri, Defence Colony and nearby areas. Call or WhatsApp 7009679903 for a quick visit.
6. Do I need permission to cut a roof in Delhi?
For independent houses, you usually need your own planning and, if structural changes are involved, an engineer's advice. In societies, offices and commercial complexes, you may need approval from the RWA, building owner or local authority. We can guide you on the basics.
7. What is the difference between roof cutting and core drilling?
Roof cutting makes larger openings, such as for stairs, lifts or skylights. Core drilling makes small, round holes for pipes, ducts and cables. Many projects use both.
8. Can I get a quote on WhatsApp?
Yes. Send a photo of the roof, the size of the opening and your location to 7009679903. We usually reply quickly with an estimate and a site visit plan.
Book Your Roof Cutting Service in Nehru Place Today
Whether you are planning a new staircase, a skylight, a lift shaft or a duct opening, the right cutting method saves you time, money and stress. Our roof cutting service in Nehru Place is built around careful work, clear pricing and respect for your property.
Do not risk cracks and noise with old-style breaking. Choose clean, controlled diamond cutting.
👉 Get Your Free Quote Now
Share your photos, size and location, and we will get back to you with a clear plan and price.
