Vikash Puri (also spelled Vikaspuri) is one of West Delhi's biggest and busiest residential areas. Independent houses, builder floors, large housing societies, schools, clinics and shops all stand side by side along the Outer Ring Road and inside the colony blocks. As families grow and businesses expand, owners often need a new staircase, lift, skylight or terrace opening.
A professional roof cutting service in Vikash Puri makes these changes smooth and safe. At Core Cutting India, we use diamond saws, wire saws and core drills to cut RCC roofs and slabs on lines you approve. The result is a clean opening, controlled dust and very little vibration, so your home, shop and neighbours stay comfortable.
📞 Call or WhatsApp: 7009679903 📧 Email: [email protected] 🧮 Find your cost: Rate Calculator
Quick Facts
- What it is: Cutting a planned opening in an RCC roof or slab using diamond tools
- Typical cost: About ₹80 to ₹250 per running foot in Delhi NCR
- Small openings: Usually ₹6,000 to ₹25,000
- Time: A few hours for small cuts, a day or more for stairs and lifts
- Best for: Lifts, stairs, skylights, ducts, terrace changes
- Contact: 7009679903 on call or WhatsApp
Why Vikash Puri Owners Prefer Diamond Cutting
Vikash Puri has grown over many years, and its buildings reflect that. Some houses are old and solid. Others are newer builder floors with finished interiors. Many are part of societies with rules about noise, working hours and common areas.
Here is what usually matters to owners in this area:
- Society and RWA rules about noise and timings
- Close neighbours on both sides
- Finished interiors that must not be damaged
- Elderly family members who need a calm home
- Shops below that must stay open
- Parking and gate limits for machines and materials
Heavy hammering does not suit these conditions. It brings loud noise, strong shaking and thick dust. Diamond cutting is far gentler. A blade or wire follows a marked line, water cools the cut and holds dust down, and only the planned part of the slab is removed.
Our Roof Cutting Services in Vikash Puri
Staircase Opening for Terrace or New Floor
Adding another floor or opening your terrace? We cut the stair opening to your exact drawing.
Lift Opening in Existing Houses
Many families in Vikash Puri add a lift for elders. We cut shaft openings through each slab with low vibration and straight edges.
Skylight and Ventilation Openings
Dark stair cores, bathrooms and inner rooms feel brighter with a skylight. We cut round, square or rectangular openings.
Duct, Pipe and Exhaust Openings
Clinics, restaurants, offices and coaching centres need clean openings for ducts, chimneys, pipes and cables.
Terrace Slab Removal
Planning a terrace room, solar frame, tank platform or open deck? We cut the slab in sections and remove it safely.
Core Drilling in Slabs
Our core drills make smooth round holes in many diameters, for pipes, drains and wiring.
Wall and Floor Cutting Support
If your project needs wall work too, see our related pages:
Our Process, Explained Simply
Step 1 – Send details. Share roof photos, opening size and your Vikash Puri address on WhatsApp.
Step 2 – We inspect. We check slab thickness, beam position, steel clues, access, water and power.
Step 3 – You get a quote. The price and inclusions are explained in plain words.
Step 4 – We plan around you. We plan work timing to suit your family, society rules or shop hours as far as possible.
Step 5 – Protection and marking. Floors and nearby items are covered. Cut lines are marked and confirmed with you.
Step 6 – Diamond cutting. The right machine is used for your slab. Water keeps dust and heat low.
Step 7 – Removal and cleanup. The slab is lifted out in sections. Slurry and debris are cleared before handover.
Tools and Technology
| Machine |
Best For |
Benefit |
| Slab Saw |
Flat roofs and terraces |
Quick, straight cuts |
| Wall Saw |
Thick or heavily reinforced slabs |
Deep, accurate cuts |
| Wire Saw |
Large or hard-to-reach sections |
Flexible sizes and shapes |
| Core Drill |
Round holes for services |
Clean, exact diameter |
| Hand-held Diamond Saw |
Corners and finishing |
Easy control in tight spots |
Diamond tools cut through concrete and steel bars together. That gives a sharp, smooth and strong edge.
Cutting vs Breaking: Which Suits Vikash Puri Better?
| Factor |
Diamond Cutting |
Hammer Breaking |
| Vibration |
Very low |
Heavy |
| Risk of cracks |
Low |
High |
| Noise |
Moderate |
Very loud |
| Dust |
Controlled with water |
Heavy |
| Edge finish |
Straight |
Rough |
| Society complaints |
Fewer |
More likely |
| Repairs afterwards |
Small |
Often large |
Roof Cutting Charges in Vikash Puri: What to Expect
People often search "roof cutting cost per sq ft" or "slab cutting rate near me." Because every roof differs, the price depends on:
- Slab thickness
- Steel density
- Opening size and shape
- Floor level and access
- Working hours, such as early morning or holiday work
- Debris removal
Indicative Price Table (Delhi NCR)
| Job |
Approximate Cost |
| RCC roof cutting |
₹80 – ₹250 per running foot |
| Small opening (2 ft × 2 ft) |
₹4,000 – ₹8,000 |
| Staircase opening |
₹15,000 – ₹45,000 |
| Core drilling |
₹500 – ₹3,500 per hole |
| Debris removal |
Based on quantity |
These are guide prices only. Final cost depends on inspection. Use our Rate Calculator or send measurements on WhatsApp for a closer estimate.
Helpful tip: Always ask what the quote covers. Machine, labour, water, electricity, safety and cleaning should be clearly listed.
Who Uses Roof Cutting in Vikash Puri?
Independent House and Builder Floor Owners
Stairs, lifts, skylights and terrace rooms are the most common requests.
Society Residents
With RWA approval, owners cut service openings or internal links as needed.
Shops and Showrooms
Layout changes, stair access and duct openings can be done with limited disturbance.
Clinics and Diagnostic Centres
Quiet, low-dust work keeps patients comfortable.
Schools and Coaching Centres
Stair and ventilation openings are planned around class timings.
Restaurants and Banquet Halls
Exhaust and chimney openings need precise, neat cutting.
Architects and Contractors
We follow drawings closely, so your design is delivered as planned.
Why People Trust Core Cutting India
We focus on cutting. Concrete cutting and core drilling are our daily work.
We explain clearly. You will know the method, time and price before we start.
We respect your property. We protect surroundings and clean up afterwards.
We give honest advice. If an engineer should approve the plan, we say so first.
We are easy to reach. Call, WhatsApp or email and get a direct reply.
We know West Delhi. Society rules, parking limits and busy ring road traffic are part of our planning.
Safety Standards on Every Job
- Inspect the slab and surroundings before starting
- Use temporary support where needed
- Wear helmets, gloves, goggles, ear protection and safety shoes
- Keep power connections away from water
- Block access below the cutting area
- Cut in planned sections to avoid sudden falls
- Clean slurry and debris promptly
For large openings near beams, columns or load-bearing parts, please consult a structural engineer. We gladly work to your approved drawing.
Areas We Serve Around Vikash Puri
We regularly work in:
- Vikash Puri (Vikaspuri) and Outer Ring Road
- Janakpuri and Hari Nagar
- Tilak Nagar and Subhash Nagar
- Rajouri Garden and Tagore Garden
- Paschim Vihar and Peeragarhi
- Uttam Nagar and Mohan Garden
- Keshopur and Nawada
- Dwarka Mor and Najafgarh Road
- Punjabi Bagh and Madipur
- Sarojini Nagar, Lajpat Nagar and Adarsh Nagar
Roof and Concrete Cutting in Other Cities
We also support projects in:
- Gurugram – towers, villas and builder floors
- Noida and Greater Noida – offices, societies and commercial buildings
- Ghaziabad – homes, warehouses and workshops
- Faridabad – residential and industrial units
- Chandigarh, Mohali and Panchkula – villas and commercial projects
- Ludhiana, Jalandhar and Amritsar – renovation and structural work
- Jaipur – residential and commercial cutting
Send your city name and photos on WhatsApp to check availability.
Checklist Before You Book
- Consult an engineer if the opening touches a beam or column.
- Take society or RWA approval where needed.
- Fix the opening size before work begins.
- Agree on working hours.
- Decide who removes debris.
- Ask about the method. Cutting and breaking are very different.
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Vikash Puri?
Roof cutting in Vikash Puri usually costs ₹80 to ₹250 per running foot. The final price depends on slab thickness, steel reinforcement and site access. Small openings often cost ₹6,000 to ₹25,000. Call 7009679903 or use our rate calculator for a clear estimate.
2. Is roof cutting allowed in housing societies?
Most societies need permission from the RWA or management for structural work, and sometimes an engineer's approval. We suggest taking written approval first. We can also plan work timings to follow society rules.
3. How long does roof cutting take?
A small opening can take 2 to 4 hours. A staircase or lift opening may take a day or more, depending on size and slab thickness. We confirm the timing after inspection.
4. Is diamond cutting safe for houses with finished interiors?
Yes. Diamond cutting causes very little vibration compared with hammering, so tiles, walls and ceilings stay safe. We also cover floors and furniture, and control dust with water.
5. Do you provide roof cutting near me in Janakpuri or Hari Nagar?
Yes. We serve Vikash Puri, Janakpuri, Hari Nagar, Tilak Nagar, Paschim Vihar and nearby areas. Call or WhatsApp 7009679903 to book a visit.
6. Do I need permission for roof cutting in Delhi?
For structural changes, take advice from a qualified structural engineer. In societies, commercial buildings or rented premises, you may also need approval from the owner, RWA or local authority. We can guide you on what to check.
7. What is the difference between roof cutting and core drilling?
Roof cutting makes larger openings such as stairs, lifts and skylights. Core drilling makes smaller round holes for pipes, ducts and cables. Many projects use both.
8. Can I get a quote on WhatsApp?
Yes. Send a roof photo, opening size and your location to 7009679903. We will share an estimate and plan the site inspection.
Conclusion: Book Your Roof Cutting Service in Vikash Puri
Opening a roof should improve your home or business, not bring cracks, noise and society complaints. With diamond cutting, careful planning and honest pricing, you get a clean, accurate and safe result. Our roof cutting service in Vikash Puri is built on low-vibration methods, clear communication and respect for your property and neighbours.
Send us a photo and your measurements today, and we will guide you from there.
👉 Get Your Free Quote Now
