A professional roof cutting service in Ahmedabad uses diamond blades and wire saws to remove a marked part of an RCC roof. The cut is neat, the vibration is low, and nearby walls, beams and tiles stay safe. Core Cutting India provides this service to homes, offices, shops, schools and industries across Ahmedabad.
Want a rough budget first? Open our rate calculator or WhatsApp your measurements to 7009679903.
Roof Cutting Service in Ahmedabad: Quick Facts
| Question |
Short answer |
| What is it? |
Cutting an opening in an RCC roof or slab using diamond tools |
| Common uses |
Staircase, lift shaft, duct, skylight, slab removal |
| Typical cost |
About ₹150–₹360 per sq ft |
| Time needed |
A few hours to a few days, depending on size |
| Noise and dust |
Low and controlled with water cooling |
| Who can book |
Homeowners, builders, shop owners, factories |
| How to book |
Call or WhatsApp 7009679903 |
Why Ahmedabad Roofs Need Special Care
Ahmedabad is not one type of city. It is many cities in one, and each part has its own building style.
Old city and pol houses
Areas like Manek Chowk, Kalupur, Dariapur, Raipur and Shahpur have heritage buildings and tightly packed lanes. Access is narrow, and walls are old. Heavy hammering here can cause serious damage. Our low-vibration cutting is a much safer option.
Established residential zones
Navrangpura, Paldi, Ellisbridge, Naranpura, Ghatlodia, Maninagar and Vastrapur have bungalows and low-rise apartments, many built decades ago. Staircase and lift retrofits are very common here.
New western Ahmedabad
Bodakdev, Thaltej, Prahlad Nagar, Bopal, South Bopal, Shilaj and Sindhu Bhavan Road are full of modern towers, clubs and showrooms. Here, cutting is used for duct openings, interior redesigns and service shafts.
Industrial belts
Vatva, Naroda, Odhav, Changodar, Sanand and Narol have factories that often need machine pits, drainage cuts and thick slab removal.
A team that understands these differences can plan better and avoid costly mistakes. That is what we bring to your site.
Our Roof Cutting Services in Ahmedabad
Terrace Staircase Opening
We cut a clean opening so that your new staircase fits perfectly.
Lift Opening Through Slabs
Whether it is a home lift or a commercial passenger lift, we cut straight openings on every floor.
Slab Removal for Reconstruction
Weak, leaking or damaged slabs are cut into blocks and carried out safely.
Duct and Chimney Openings
Common in restaurants, cafés, clinics and kitchens.
Industrial Slab and Floor Cutting
Machine foundations, pits, trenches and pipeline openings.
Beam and Column Cutting
Done only after your structural engineer approves.
Core Cutting
Holes for AC pipes, plumbing, drainage and electrical lines.
Wall Cutting
Door, window and passage openings. Explore our related services in Junagadh, Surat and Gandhinagar.
Roof Cutting Cost in Ahmedabad
Let us keep the money talk simple and honest.
Estimated rate card
| Work |
Indicative price |
| RCC roof / slab cutting |
₹150 – ₹360 per sq ft |
| Staircase opening |
Fixed quote after measurement |
| Lift opening |
Per slab, based on size and thickness |
| Core holes |
₹500 – ₹3,000 per hole |
| Wall cutting |
Per running foot |
| Heavy industrial cutting |
Custom quote |
These are approximate figures. The final price is shared after a site visit.
What makes the price go up or down?
- Slab thickness: Thicker slabs take longer.
- Steel inside: More bars mean more blade wear.
- Total area: Bigger work often gets a better rate per sq ft.
- Access: A third-floor cut in a narrow pol lane costs more effort than an open ground-floor job.
- Debris disposal: Blocks need to be lifted and carried.
- Timing: Night or emergency work may add to the cost.
Free estimate in minutes
Use the Rate Calculator or WhatsApp us at 7009679903.
Which Cutting Method Is Right for Your Job?
Not every roof needs the same tool. Here is a simple decision guide.
Use a slab saw when…
The roof or floor is open and easy to reach. It makes straight, deep cuts quickly.
Use a wall saw when…
You need large, vertical or controlled openings, such as in thick walls or sloping sections.
Use a diamond wire saw when…
The slab is very thick, the area is hard to reach, or you are cutting beams and columns.
Use core drilling when…
You only need round holes for pipes, ducts or cables.
Our team picks the right method after inspecting your site, so you do not need to worry about technical choices.
How We Work: From First Call to Final Clean-Up
Step 1: Tell us what you need
Call or WhatsApp 7009679903. Share your area, the size of the opening and a few photos.
Step 2: Free site visit
Our supervisor checks slab thickness, beams, steel and access.
Step 3: Marking and approval
The opening is drawn on the slab. Your architect or engineer can confirm it.
Step 4: Written quote
You get the price, timeline and scope in clear words.
Step 5: Safety preparation
Floors are covered, the area below is cleared and supports are placed if needed.
Step 6: Diamond cutting
We cut along the marked lines using water-cooled blades.
Step 7: Controlled removal
Cut blocks are lifted or lowered safely.
Step 8: Clean finish
Slurry is cleared, and the site is handed over ready for the next work.
Technology We Use
| Equipment |
What it does |
| Slab / floor saw |
Straight cuts in roofs and floors |
| Wall saw |
Large and vertical openings |
| Diamond wire saw |
Thick or hard-to-reach concrete |
| Core drill |
Smooth round holes |
| Hand saw |
Corners and finishing |
Diamond-segmented blades slice through concrete and steel together. Continuous water flow protects the blade and keeps dust down.
Safety Standards on Our Ahmedabad Sites
- Look before cutting: We check for beams, columns, pipes and wires.
- Engineer's opinion for big changes: Strongly advised for structural cuts.
- Cordoned work area: No one stays under the cutting zone.
- Temporary props: Used where the slab needs support.
- Personal protective gear: Helmets, gloves, goggles, shoes and ear protection.
- Electrical safety: Proper earthing and covered cables.
- Planned lifting: Heavy pieces are handled with care.
If your building is old, tell us before the visit. We will plan extra precautions.
Where Roof Cutting Is Needed in Ahmedabad
| Location type |
Common job |
| Bungalows in Satellite, Bodakdev, Thaltej |
Terrace stair or lift opening |
| Flats in Maninagar, Vastral, Nikol |
Duct and water tank access |
| Shops on CG Road and Ashram Road |
Mezzanine or stair opening |
| Showrooms on SG Highway |
Duct, skylight and layout changes |
| Pol houses in the old city |
Careful low-vibration cutting |
| Factories in Naroda, Vatva, Odhav |
Machine pits and floor openings |
| Schools and hospitals |
Quiet, controlled work |
| Offices near Prahlad Nagar and Vastrapur |
Interior redesign openings |
Why Choose Core Cutting India?
- We plan before we cut. Every opening is measured, marked and approved.
- We protect your property. Low vibration means fewer cracks.
- We keep things clear. Price, time and process are explained simply.
- We respect your neighbours. Less noise, less dust.
- We reach you fast. Inspection across Ahmedabad without long delays.
- We handle all scales. From a single staircase to an industrial floor.
Cutting vs Hammer Breaking
| Feature |
Diamond Cutting |
Hammer Breaking |
| Accuracy |
Follows exact line |
Uneven |
| Vibration |
Very low |
Heavy |
| Noise |
Lower |
Very loud |
| Dust |
Controlled |
High |
| Damage to nearby parts |
Rare |
Frequent |
| Edge |
Clean and straight |
Rough |
| Repair cost after |
Low |
High |
Where We Work Around Ahmedabad
Inside the city: Satellite, Bodakdev, Prahlad Nagar, SG Highway, Thaltej, Vastrapur, Navrangpura, Paldi, Ellisbridge, Ashram Road, CG Road, Naranpura, Ghatlodia, Chandkheda, Motera, Gota, Sola, Maninagar, Vastral, Nikol, Naroda, Odhav, Vatva, Sarkhej, Bopal, South Bopal, Shilaj, Manek Chowk, Kalupur and Raipur.
Nearby towns: Gandhinagar, Kalol, Sanand, Changodar, Dholka, Bavla, Viramgam, Mehsana and Nadiad.
Service in other cities
Core Cutting India also offers cutting services in Surat, Vadodara, Rajkot, Gandhinagar, Junagadh, Bharuch, Vyara, Anand and other cities across Gujarat. See more:
Preparation Checklist Before We Arrive
- Keep a sketch or drawing ready.
- Take clear photos of the roof and the room below.
- Confirm the opening size with your architect or mason.
- Ask your engineer to approve beams or columns, if involved.
- Inform neighbours or the society office.
- Keep water and power ready.
- Move furniture and cover valuables.
Benefits of Hiring a Professional Roof Cutting Team
- Protects your building from unnecessary damage
- Saves time on demolition and repair
- Creates clean openings for stairs and lifts
- Reduces dust and noise
- Improves site safety
- Gives better value over the full project
Frequently Asked Questions (FAQs)
1. What is roof cutting service in Ahmedabad?
Roof cutting service in Ahmedabad is the process of cutting an RCC roof or slab using diamond tools to create openings for staircases, lifts and ducts, or to remove damaged parts safely. It creates less vibration and dust than breaking.
2. How much does roof cutting cost in Ahmedabad?
Roof cutting in Ahmedabad usually costs about ₹150 to ₹360 per sq ft. The final rate depends on slab thickness, steel content, location and area. Use the rate calculator or call 7009679903 for a precise quote.
3. Is roof cutting safe for old pol houses and heritage buildings?
It is generally safer than hammering because vibration is much lower. We inspect the building first and use supports when needed. For heritage structures, involve a structural expert before starting.
4. How long does a roof cutting job take?
A small opening may take a few hours to a day. Thicker or larger slabs take longer. We share the expected time after the site visit.
5. Can you cut a slab to add a lift in my existing house?
Yes. We make accurate slab openings so your lift contractor can install the shaft. A structural check is recommended first.
6. Do you serve Satellite, Bopal, Naroda and Vatva?
Yes. We serve all major parts of Ahmedabad, including Satellite, Bopal, Naroda, Vatva, Maninagar and SG Highway, as well as nearby towns such as Gandhinagar and Sanand.
7. Why is cutting better than breaking a roof?
Cutting is accurate, cleaner and quieter. It protects nearby walls and beams, while breaking often creates cracks and extra repair cost.
8. How can I book a roof cutting service in Ahmedabad?
Call or WhatsApp 7009679903, or email [email protected] with your location, measurements and photos. We will arrange a site visit and share a clear quote.
Get Started Today
Ready to open that slab the smart way? Reach out now.
📞 Call: 7009679903 💬 WhatsApp: Send your site details 📧 Email: [email protected] 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator
Conclusion
From pol houses in Raipur to showrooms on SG Highway and factories in Vatva, a reliable roof cutting service in Ahmedabad helps you make changes without damaging your building. Diamond cutting is accurate, safer and cleaner, and it saves money on repairs.
Core Cutting India brings careful planning, modern equipment and honest pricing to every site in Ahmedabad, Gandhinagar, Sanand and nearby areas. Call or WhatsApp 7009679903 today to book your site visit and receive a clear, no-pressure quote.
