Kadi is a town of business and hard work. Cotton and oilseed processing, engineering workshops, warehouses and busy markets sit alongside homes where families keep growing and building. In such a place, concrete roofs and slabs are always being modified: a stair here, a lift there, a duct opening in a mill, a pit for a new machine.
The question is how to open the roof without damaging the building. The answer is a professional roof cutting service in Kadi. Core Cutting India uses diamond saws and wire saws to cut RCC roofs and slabs along exact lines, so the opening is neat, the vibration is low and the structure stays safe.
If you are planning any slab opening in Kadi or nearby, tell us your requirement. We will guide you on method, time and cost.
Call or WhatsApp: 7009679903 Email: [email protected]
Roof Cutting
Roof cutting means making a planned opening in an RCC roof or slab with diamond cutting tools, without breaking or shaking the rest of the structure.
Typical uses in Kadi:
- Terrace staircases
- Lift and elevator shafts
- Mezzanine openings in shops and warehouses
- Pipe, duct and cable passages
- Pits and equipment openings in mills and workshops
- Skylights and ventilation shafts
- Removal of damaged slab sections
Why Kadi Buildings Need Precise Cutting
Working Industrial Buildings
Mills, ginning units and workshops carry heavy machinery and constant load. Their slabs and beams should not be shocked by heavy hammering. Diamond cutting is controlled and keeps stress low.
Dust Can Spoil Products
Cotton, oilseed and fine raw materials do not mix well with construction dust. Water-cooled cutting reduces dust and helps you protect stock and workers.
Short Shutdown Windows
Industrial units cannot stay closed long. A planned cut can be finished in hours, so your production schedule recovers fast.
Shops and Homes in Close Lanes
Busy market areas and dense residential lanes have shared walls. Low-vibration cutting protects neighbouring property.
Expansion Without Rebuilding
You can add stairs, shafts and mezzanines to existing buildings without demolishing large portions.
Our Roof and Slab Cutting Services in Kadi
Industrial Units and Mills
- Openings for pipes, ducts and conveyors
- Pits and sumps in thick slabs
- Machine foundations and equipment openings
- Platform and mezzanine access
- Layout changes in existing slabs
Warehouses and Godowns
- Loading area modifications
- Stair and lift openings
- Sectional removal of unwanted slabs
Shops, Showrooms and Offices
- Mezzanine stair openings
- Lift cut-outs
- Plumbing, AC and electrical shafts
- Fire-exit staircase openings
Homes and Apartments
- Terrace stairs
- Home lift shafts
- Skylights and light wells
- Terrace door and water tank openings
Related Concrete Cutting
- Core drilling
- Wall cutting for doors and windows
- Floor saw cutting
- Wire saw cutting for thick structures
Roof Cutting Cost in Kadi: What to Expect
Roof cutting is usually priced per running foot of cut. Very small openings may have a minimum charge. Because slab thickness and steel differ from building to building, the cost can vary.
What Decides the Price
- Slab thickness – thicker slab, more effort.
- Reinforcement density – heavy steel slows cutting.
- Total cutting length – more length, higher cost.
- Access and height – difficult access needs more manpower.
- Working environment – running plants and confined areas need extra care.
- Type of machine – slab saw, wall saw or wire saw.
- Scheduling – urgent or off-hours work can change the rate.
Approximate Price Guide
| Type of Work |
Approximate Rate |
| Thin residential or shop slab |
₹60 – ₹90 per running foot |
| Medium thickness slab |
₹90 – ₹140 per running foot |
| Thick industrial slab, heavy steel |
₹140 – ₹200+ per running foot |
| Small cut-outs |
Minimum job charge may apply |
These rates are indicative and meant for planning. We provide a written quote after seeing your site and requirement.
Instant Estimate
Use our rate calculator or WhatsApp your measurements and photos to 7009679903.
Smart Ways to Control Cost
- Plan every opening before the team arrives.
- Share your engineer's drawing.
- Keep water and power ready.
- Avoid size changes after marking.
- Combine multiple jobs in one visit.
Our Process: Clear From Start to Finish
Step 1 – Enquiry. Call or WhatsApp with your Kadi location, purpose and approximate size of the opening.
Step 2 – Site study. We check slab thickness, steel layout, beams and access.
Step 3 – Quotation. You receive the rate, scope and expected time in writing.
Step 4 – Marking. We mark cutting lines and confirm them with you or your engineer.
Step 5 – Protection. Floors, stock and equipment are protected. Props, water and slurry control are arranged.
Step 6 – Cutting. Diamond blades or wires cut through concrete and steel along the lines.
Step 7 – Removal. Heavy pieces are cut into sections and lowered safely.
Step 8 – Clean-up. We clear debris and slurry and hand over the finished opening.
Technology and Equipment
| Equipment |
Best Used For |
| Slab saw |
Everyday roof and floor openings |
| Rail-mounted wall saw |
Long, deep, straight cuts |
| Diamond wire saw |
Thick slabs, beams and restricted spaces |
| Core drill |
Round holes for pipes, cables and anchors |
| Water cooling and slurry control |
Low dust, cleaner working area |
We match the machine to the job. A thick industrial slab needs a different approach than a thin residential roof. This careful selection saves time and protects the building.
Safety Practices on Every Site
Cutting a roof changes how a building carries load. That is why we put safety first.
- Structural study before marking
- No cutting of main beams or columns unless an engineer approves
- Temporary props for large openings
- Cleared drop zone under the cutting area
- Trained operators with helmets, gloves, goggles and ear protection
- Electrical safety in wet conditions
- Compliance with plant rules at mills and factories
- Honest guidance if your plan needs engineering advice first
Use Cases From Daily Life in Kadi
A Ginning or Processing Unit Changing Its Layout
The owner needs a duct opening and a stair to a new platform. We cut both with low dust so stock and workers are protected.
An Engineering Workshop Installing a New Machine
A pit and a pipe opening are needed in a thick slab. We cut around the steel and nearby equipment carefully.
A Market Shop Adding a Mezzanine
We cut a clean stair opening quickly so the shop can reopen soon.
A Family Home Building a Terrace Room
A staircase opening is cut neatly, ready for the mason.
A Clinic or School Installing a Lift
Water-cooled, low-vibration cutting helps keep the building in use.
(These are typical examples of work handled in industrial and residential towns like Kadi.)
Diamond Cutting vs. Hammering
| Question |
Diamond Cutting |
Hammering |
| Opening accuracy |
High |
Low |
| Vibration |
Very low |
Very high |
| Risk of cracks |
Low |
High |
| Dust |
Controlled |
Heavy |
| Noise |
Lower |
Very loud |
| Finishing |
Clean |
Rough |
| Repair cost later |
Low |
High |
Areas We Serve Around Kadi
We provide roof cutting and slab cutting in Kadi and nearby locations, including:
- Kadi city and the Kadi industrial belt
- Kalol
- Chhatral
- Mehsana
- Vijapur
- Becharaji
- Viramgam
- Sanand
- Patan
- Palanpur
- Ahmedabad and Gandhinagar
If your site is not listed, call us. We can usually plan work across North Gujarat.
We Also Serve Other Gujarat Cities
Our team also provides concrete cutting in other cities. Explore these pages:
We also work in other states, which helps companies with multiple locations.
Why Customers Choose Core Cutting India
- Clear quotes with no confusing extras
- Tools selected to suit your slab
- Care for your stock, machines and property
- Neat finish and full clean-up
- Quick replies on call and WhatsApp
- Smooth coordination with engineers, architects and contractors
- Safety-first advice throughout
Common Mistakes in Roof Cutting
- Marking the opening without checking beams
- Selecting a contractor only on lowest price
- Skipping props on large openings
- Forgetting waterproofing around terrace cut-outs
- Ignoring the weight and disposal of cut pieces
- Starting without an approved drawing
Checklist Before You Book
- [ ] Purpose and size of the opening decided
- [ ] Engineer's approval ready for structural work
- [ ] Area below cleared and stock protected
- [ ] Water and power available
- [ ] Plant entry or permission arranged
- [ ] Photos or sketch ready
Frequently Asked Questions: Roof Cutting Service in Kadi
1. How much does roof cutting cost in Kadi?
Roof cutting in Kadi is usually charged per running foot. Thin slabs may start around ₹60 per foot, while thick or heavily reinforced slabs cost more. The final rate depends on thickness, steel, cutting length and access. Call 7009679903 or use our rate calculator for a quick estimate.
2. Can you cut slabs inside a running mill or factory?
Yes. We plan the work to keep dust and vibration low and follow your safety rules. Sharing drawings and your preferred working hours helps us reduce disturbance to production.
3. Is diamond roof cutting safe for my building?
Yes, when done with proper planning and equipment. It produces far less vibration than hammering. For large openings, use temporary supports and get your engineer's approval.
4. How long does it take to cut a roof opening?
Small openings may take a few hours. Staircase, lift or industrial slab openings may need a day or more, depending on slab thickness and reinforcement.
5. Do you offer roof cutting near me in Kalol, Chhatral or Mehsana?
Yes. We serve Kadi and nearby places including Kalol, Chhatral, Mehsana, Vijapur, Becharaji and Viramgam. Call or WhatsApp us with your location to confirm.
6. Will cutting produce too much dust?
No. Water-cooled cutting keeps dust far lower than manual breaking. We also cover floors, stock and equipment before starting.
7. Do I need an engineer's approval for a staircase or lift opening?
For structural changes, it is strongly recommended. Your engineer can confirm the safe position and size, and we will cut exactly as per the approved plan.
8. How do I book roof cutting service in Kadi?
Call or WhatsApp 7009679903, or email [email protected] with your location, opening size and photos. We will arrange a site visit, send a written quote and fix a convenient date.
Book Your Roof Cutting Service in Kadi Today
Keep your building safe and your work on schedule. Choose a team that plans carefully and cuts cleanly.
Conclusion
A dependable roof cutting service in Kadi protects your building, your stock and your budget. Diamond cutting gives you the opening you planned, with low vibration, controlled dust and clean edges, which is why mills, workshops, shops and homes all prefer it to manual breaking.
Core Cutting India brings clear pricing, careful planning and tidy work to Kadi and nearby areas of Mehsana district and North Gujarat. Call or WhatsApp 7009679903 today to get your free roof cutting quote in Kadi.
