You have decided to build a staircase to your terrace, add a new room above the shop, or fit a lift in your building. Then comes the big question: how do you open a thick concrete roof without cracking everything around it?
That is exactly where a professional roof cutting service in Raman helps. Instead of breaking the slab with hammers and chisels, we cut it with diamond tools along a straight, marked line. The result is a clean opening, less noise, less dust and a building that stays strong.
Core Cutting India provides RCC roof cutting, slab cutting, wall cutting and core cutting for homes, shops, mandi godowns, schools and workshops in Raman and the nearby towns of Bathinda district.
Call or WhatsApp: 7009679903 and tell us what you want to open. We will guide you on the method, time and cost.
What Is Roof Cutting?
Roof cutting is the process of cutting a planned section of an RCC roof or slab using diamond-tipped saws, so that a staircase, skylight, lift shaft or duct opening can be made without breaking the surrounding concrete. It is faster, neater and safer than manual breaking, and it is the preferred method for renovation work across Punjab today.
Why Raman Property Owners Are Choosing Machine Cutting
Raman is a busy mandi town. Houses are growing upward, shops are adding mezzanine floors, and godowns near the grain market are being modified for better storage and movement. Many of these buildings have slabs that are 5 to 8 inches thick with strong steel reinforcement.
Breaking such a slab by hand creates three problems:
- Heavy vibration that can crack beams, walls and flooring
- Rough edges that need extra plastering and repair
- Flying debris and dust that disturb families and neighbouring shops
Saw cutting solves all three. You get a smooth edge, controlled working and a much cleaner site.
Our Roof Cutting Services in Raman
RCC Terrace and Roof Cutting
We cut openings in terrace slabs for staircases, head-room, water tank access and ventilation. This is the most common request from home owners.
Slab Cutting for Floors and Ceilings
Need to connect the ground floor with a new floor above? We cut slab sections neatly so your engineer can add steel framing or a staircase.
Wall Saw Cutting
A rail-mounted diamond wall saw gives long, straight and deep cuts. It works very well for thick slabs and large openings.
Wire Saw Cutting
For extra-thick concrete, tight spaces or heavy structures, a diamond wire is passed around the section and pulled to cut it in pieces.
Hand Saw and Ring Saw Cutting
Small corners, short lines and difficult spots are handled with compact machines.
Core Cutting
Round holes for drain pipes, AC lines, electrical conduits and water supply. Often needed along with a roof opening.
Door, Window and Passage Cutting
Neat openings in concrete or brick walls, without damaging the rest of the wall.
Looking beyond Raman? We also offer similar services in Amritsar, Hoshiarpur and Moga.
How the Work Happens: From Your First Call to a Clean Opening
We follow the same simple process on every job, so you know what to expect.
1. Share Your Requirement
Send photos, the size of the opening and your Raman location on WhatsApp.
2. Site Visit and Slab Check
We check slab thickness, steel layout, beam position, access to water and power, and how debris can be removed.
3. Marking
The outline is drawn on the slab with you or your engineer present. Nothing is cut until you are happy with the marking.
4. Safety Planning
We decide how the cut pieces will be supported and lowered, so no piece falls suddenly.
5. Diamond Cutting
The machine cuts along the line with water cooling. Concrete and steel bars are cut together.
6. Lifting and Clearing
Cut blocks are removed in manageable pieces. We keep the area as tidy as possible.
7. Handover
You get straight edges ready for your mason, welder or contractor to continue.
Roof Cutting Cost in Raman: What You Should Expect to Pay
Nobody likes vague pricing, so here is a simple guide.
Roof cutting is usually charged by running foot, which means the total length of all cut lines, and not by the area of the hole.
Indicative Rates
| Job Type |
Approximate Cost |
| Standard RCC roof (4–6 inch) |
₹100 – ₹180 per running foot |
| Thick RCC slab (7–12 inch) |
₹180 – ₹300+ per running foot |
| Core cutting (holes) |
Per hole, depends on diameter and depth |
| Wall opening (door/window) |
Per running foot or per job |
| Wire saw or heavy structure |
Quoted per project |
A Simple Example
Suppose you want a staircase opening of 10 ft × 3 ft. The total cut length is 10 + 10 + 3 + 3 = 26 running feet. At an indicative rate in the standard range, your estimate would be roughly ₹2,600 to ₹4,700, before extra charges such as lifting, travel or difficult access.
What Changes the Price
- Slab thickness and amount of steel
- Length of the cut
- Floor height and ease of access
- Availability of water and electricity
- Machine type needed
- Debris removal and lifting
- Travel distance from our team
These figures are indicative. The final price is confirmed after checking your site.
Check Your Estimate Online
Use the Core Cutting India Rate Calculator to get a quick idea before you call.
Technology Behind a Clean Cut
Cutting concrete is not about force; it is about the right tool.
- Diamond segments grind through concrete and rebar instead of breaking it
- Wall saws guide the blade on a rail for dead-straight lines
- Wire saws handle thick and awkward structures
- Water cooling keeps blades sharp and reduces dust
- Compact hand saws reach corners and narrow spots
Because the machine does the work in a controlled way, your building experiences far less stress.
Benefits of Choosing a Professional Roof Cutting Service
- Better structural care: Cuts are planned around beams and columns
- Straight, tidy edges: Less finishing work afterwards
- Much lower vibration: Fewer cracks in walls and tiles
- Quicker completion: Many home jobs finish in one day
- Less noise and dust: Comfortable for families and nearby shops
- Safer working: Controlled lifting and cutting
- Cost-effective: Avoids the repair costs that follow manual breaking
Roof Cutting vs Hammer Breaking
| Point |
Machine Cutting |
Hammer Breaking |
| Edge quality |
Straight and smooth |
Uneven |
| Vibration |
Low |
High |
| Dust and noise |
Controlled |
Heavy |
| Crack risk |
Low |
High |
| Repair work after |
Minimal |
Extensive |
| Safety |
Higher |
Lower |
Where Roof Cutting Is Used in Raman
Home Staircase and Terrace Access
Many single-storey houses in Raman need a proper staircase to the roof or a new floor.
Shops and Showrooms
Open the ceiling to create a mezzanine or connect two floors.
Godowns and Storage Units
Mandi-based storage buildings often need wider openings, ducts or material-lifting spaces.
Schools, Clinics and Offices
Add lift shafts, ventilation or new passages.
Workshops and Small Factories
Create openings for machines, pipes and cables without halting the whole unit.
Repair and Slab Replacement
Cut out leaking or damaged slab sections and cast fresh concrete.
Safety Standards We Follow
We treat every roof as a live structure, not just a piece of concrete.
- Check for electric wires, water lines and gas pipes before cutting
- Keep people away from the area below the cut
- Support heavy slab pieces before separating them
- Use water to control dust
- Wear helmets, gloves, goggles and masks
- Keep machines in good working condition
A word of advice: For big openings in load-bearing slabs, please speak to a structural engineer before cutting. We are happy to work with your engineer or architect.
Areas We Cover Near Raman
We serve Raman and its surrounding region, including:
- Raman Mandi and nearby colonies
- Talwandi Sabo
- Sangat
- Maur
- Bhucho Mandi
- Goniana
- Rampura Phul
- Kotshamir and Jhumba area
- Bathinda
- Mansa and Sardulgarh
- Dabwali side
Other Cities We Serve
Core Cutting India also provides concrete cutting across Punjab:
Explore all services at corecuttingindia.com.
Why Customers Prefer Core Cutting India
- Quick local response for Raman and nearby areas
- Clear estimates before starting work
- Right machine for the right slab
- Trained operators who respect your property
- Tidy working style
- Easy communication in Punjabi, Hindi and English
- Suitable for small homes and large projects
Before You Book: A Simple Checklist
- Decide the exact purpose of the opening
- Measure the length and width
- Check your building drawing, if available
- Consult an engineer for large openings
- Arrange water and power access
- Clear furniture and people from below the cutting zone
- Send photos on WhatsApp for a faster quote
- Ask for a written estimate
Frequently Asked Questions (FAQs)
1. What is roof cutting service in Raman?
Roof cutting service in Raman means cutting RCC roofs or slabs with diamond saws to create openings for stairs, skylights, lifts or ducts. It is cleaner and safer than breaking concrete by hand.
2. How much does roof cutting cost in Raman?
Roof cutting in Raman generally costs between ₹100 and ₹300 per running foot, depending on slab thickness, steel and access. A final quote is given after a site check, and you can use our rate calculator for a quick idea.
3. Is roof cutting safe for my house?
Yes, when done by trained operators with proper planning and support. For big openings in load-bearing slabs, check with a structural engineer first.
4. How long does it take to cut a roof for a staircase?
A typical staircase opening in a home takes a few hours to a day. Thicker slabs and difficult access can take longer.
5. Can steel bars in the slab be cut too?
Yes. Diamond blades and wire saws cut both concrete and reinforcement bars.
6. Will cutting damage nearby walls or tiles?
Professional cutting produces very little vibration, so the risk is much lower than with manual breaking.
7. Do you provide service outside Raman?
Yes. We work in Talwandi Sabo, Maur, Bhucho Mandi, Rampura Phul, Bathinda and many other cities across Punjab.
8. How do I book roof cutting in Raman?
Call or WhatsApp 7009679903 or email [email protected] with photos, location and measurements. We will arrange the visit and quote.
Book Your Roof Cutting in Raman Today
Your roof opening should be neat, safe and stress-free. Let our team handle the cutting while you focus on the next stage of your project.
📞 Call: 7009679903
Send your roof photos on WhatsApp and get a quick estimate.
Conclusion
A concrete roof does not need to be broken to be opened. With the right diamond tools, careful planning and an experienced team, you can create a clean and accurate opening while protecting the rest of your building. For homes, shops, godowns and workshops across Raman, Talwandi Sabo, Maur, Rampura Phul and Bathinda, a professional roof cutting service in Raman is the smarter, safer and more economical choice.
Contact Core Cutting India on 7009679903 and get your roof cut the right way.
