Is your family adding a new floor in Jhunjhunu? Is your shop getting a lift? Or maybe your old Shekhawati-style house needs a modern staircase? In each case, a part of your concrete roof has to be opened, and how that is done decides how safe and neat your building remains.
That is where a trained roof cutting service in Jhunjhunu makes the difference. At Core Cutting India, we use diamond-blade machines to cut RCC roofs and slabs along exact marked lines. There is no heavy pounding, no unwanted cracks and no big mess.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected] 🌐 Website: corecuttingindia.com
Roof Cutting
Think of it like cutting a cake with a sharp knife instead of smashing it with a hammer. A diamond saw runs through the concrete and the steel bars in a straight line. The marked section is lifted out, and the remaining slab stays solid.
You may know this work by other names:
- RCC roof cutting
- Slab cutting
- Terrace opening cutting
- Concrete opening
- Staircase cutting
The goal is always the same: a clean, accurate opening with minimum damage.
Why Jhunjhunu Property Owners Need Roof Cutting
Jhunjhunu and the wider Shekhawati belt have a special mix of old and new construction. Beautiful old havelis stand beside new colonies near the bypass, and educational and industrial activity around Pilani, Khetri and Chirawa keeps pushing demand for new building work.
People call us for reasons like these:
- Adding stairs to a new first floor or terrace.
- Installing a lift in a house, hospital, shop or hostel.
- Opening a light well in a deep or closed layout.
- Changing plumbing or water tank position.
- Making duct openings for air-conditioning and ventilation.
- Repairing damaged concrete by cutting out weak sections.
- Controlled demolition before reconstruction.
For old buildings, care matters even more. Machine cutting protects the parts you want to keep.
Services We Offer in Jhunjhunu
1. Staircase Opening in RCC Roof
We create a clean opening that fits your stair design exactly.
2. Lift and Elevator Shaft Cutting
Slab openings through multiple floors, following your engineer's layout.
3. Skylight and Ventilation Opening
Let in sunlight and fresh air without weakening the roof.
4. Water Tank, Duct and Pipe Openings
Neat cuts for services, with smooth edges that reduce finishing work.
5. Partial Slab Removal
Remove only what is needed, and protect beams and columns.
6. Sectional Roof Demolition
We cut big slabs into manageable blocks, so debris is controlled.
7. Core Cutting and Drilling
For round holes of different sizes, see our core cutting service page.
Our Working Process: From Call to Clean Opening
Day 0: Enquiry. You call or WhatsApp with photos, location and opening size.
Site assessment. We check thickness, beams, steel and access.
Marking. Lines are drawn clearly and confirmed with you or your engineer.
Quote. You receive a written estimate with the unit of measurement clearly stated.
Preparation. We clear the area, set up water and power, and add supports if needed.
Cutting. Our operators cut along the marked lines with diamond tools.
Lifting. Cut sections are lowered or removed safely.
Clean-up. We leave the site tidy and ready for finishing.
Small jobs take a few hours. Staircase and lift openings usually take about a day. Large or thick slabs may need more time.
Technology That Makes Cleaner Cuts
Good machines give a good result.
- Diamond wall saw: thick slabs, deep and straight cuts.
- Slab saw: flat terraces and shallow work.
- Wire saw: hard-to-reach or very thick sections.
- Core drilling machine: round, accurate holes.
- Water cooling system: controls dust, reduces heat and protects blades.
Machine Cutting vs Manual Breaking
| Feature |
Machine Cutting |
Manual Breaking |
| Vibration |
Low |
High |
| Crack risk |
Low |
High |
| Edge quality |
Straight and smooth |
Rough and uneven |
| Dust |
Water-controlled |
Loose and heavy |
| Time |
Faster |
Slower |
| Repair after work |
Minimal |
Extensive |
If you own an older haveli-style building or a building with shared walls, machine cutting is the safer choice.
Benefits of Roof Cutting Service in Jhunjhunu by Professionals
- Structure protection: the building stays strong.
- Accuracy: size and position match the plan.
- Peace and quiet: less noise and shaking for neighbours.
- Speed: faster than hand breaking.
- Savings: less plaster and patch work later.
- Steel cutting included: concrete and bars are cut together.
- Safer work area: controlled lifting reduces the risk of accidents.
- Better result: clean openings look professional and are easier to finish.
Safety Standards on Every Job
Roof work carries real risk, so we follow a clear safety routine.
- Structure and slab checked before cutting begins.
- Temporary props used where needed.
- Lifting and lowering planned in advance.
- Operators wear helmets, gloves, goggles, ear protection and masks.
- Electrical points protected from water.
- Danger zone marked and cleared.
- No cutting in unsafe weather.
If the slab is load-bearing, part of an old structure or near shared walls, your civil engineer should approve the plan first. We are happy to work with them.
What Does Roof Cutting Cost in Jhunjhunu?
The best way to know your price is a quick inspection. Until then, here is a general guide to help you plan. These figures are indicative and not a final quote. You can also try our online rate calculator.
| Job Type |
Approx. Rate in Jhunjhunu |
| RCC slab cutting up to 6 inch |
₹95 – ₹195 per running foot |
| RCC slab cutting 6 to 12 inch |
₹195 – ₹390 per running foot |
| Core cutting, small holes |
Per-hole rate by depth |
| Core cutting, large holes |
Higher per-hole rate |
| Wire saw work |
After inspection |
| Very small jobs |
A minimum charge may apply |
Why Do Two Quotes Differ So Much?
- Slab thickness changes cutting time.
- Number and size of steel bars affects speed and blade wear.
- Length of cut changes the total bill.
- Height and access may need extra effort.
- Distance from Jhunjhunu city can affect travel cost.
- Debris lifting and removal may or may not be included.
Helpful tip: Ask each contractor to list what is included. A cheap quote that leaves out lifting, water or debris may cost more later.
Areas We Serve Around Jhunjhunu
Within Jhunjhunu city: Bypass Road, Station Road, Rani Sati Road area, Housing Board, Subhash Chowk, Sikar Road, Churu Road, Nawalgarh Road and nearby new colonies.
Nearby towns: Nawalgarh, Chirawa, Pilani, Mandawa, Khetri, Udaipurwati, Surajgarh, Buhana, Singhana, Mukundgarh, Narhar and Fatehpur.
If your location is a little further, call us and we will check availability.
Roof and Core Cutting in Other Cities of Rajasthan
Besides Jhunjhunu, we also provide cutting and drilling support in many other places. You can check these local pages:
We also work in Jaipur, Sikar, Churu, Alwar, Bikaner, Ajmer, Nagaur, Udaipur and other cities depending on the project. Call 7009679903 to confirm.
Where Roof Cutting Is Used: Real-Life Examples
Homes and Villas
- New staircase to the terrace
- Skylight in a closed corridor
- Water tank relocation
- Double-height living room
Shops, Showrooms and Offices
- Goods lift or passenger lift
- Mezzanine connection
- AC and fire duct openings
- Cable shaft cutting
Hostels, Colleges and Hospitals
- Extra stairs and ramps
- Lift installation
- Service shafts
- Renovation with low noise and low dust
Factories and Godowns
- Pits, trenches and floor openings
- Exhaust and ventilation cuts
- Slab changes for machine setup
Heritage and Old Buildings
- Careful partial openings
- Controlled changes while protecting what remains
Why Customers Choose Core Cutting India
- Straightforward talk. You get clarity on price, time and scope.
- Skilled team. Operators trained on diamond equipment.
- Right machine for each job. No shortcuts.
- Budget help. Use our rate calculator before booking.
- Care for property. We protect surroundings as much as possible.
- Easy support. Call, WhatsApp or email at any time.
Preparation Checklist Before We Arrive
- Mark or describe the exact opening you want.
- Keep your drawing or a rough sketch.
- Consult your engineer for beams and load-bearing slabs.
- Arrange water and electricity.
- Clear furniture and valuables from above and below.
- Take photos of the roof, the room beneath and the stairs or path to the roof.
- Plan waterproofing and finishing after the cut.
Frequently Asked Questions (FAQs)
1. How much does roof cutting service cost in Jhunjhunu?
In Jhunjhunu, roof cutting generally costs between ₹95 and ₹390 per running foot. The price depends on slab thickness, steel density, floor level and site access. Use our online rate calculator for a quick estimate, and we will confirm the final price after inspection.
2. Is it safe to cut a concrete roof?
Yes, when done with diamond cutting machines by trained operators. These machines create very little vibration, so nearby walls and beams are protected. For old or load-bearing slabs, please consult a civil engineer first.
3. How long does roof cutting take?
A small opening takes a few hours. A staircase or lift opening usually takes about one day. Thicker or heavily reinforced slabs may need more time.
4. Do you provide roof cutting near me in Pilani, Chirawa or Mandawa?
Yes. We serve Jhunjhunu city and nearby towns including Nawalgarh, Chirawa, Pilani, Mandawa, Khetri and Udaipurwati. Call or WhatsApp 7009679903 to confirm for your exact location.
5. Can roof cutting be done in an old building?
Yes, with careful planning. Machine cutting is gentler than breaking, so it suits older structures too. However, you should get an engineer's opinion before cutting any load-bearing part.
6. What is the difference between roof cutting and core cutting?
Roof cutting makes larger openings, usually square or rectangular, for stairs, lifts or skylights. Core cutting makes round holes for pipes, cables and AC lines. We offer both.
7. Will there be a lot of dust and noise?
Much less than manual breaking. Water cooling controls most of the dust, and diamond cutting is quieter than hammering. Some noise and water slurry are normal, and we clean the area after the work.
8. How do I book roof cutting service in Jhunjhunu?
Call or WhatsApp 7009679903 with your location, roof photos and required opening size. We will arrange a site check and share a clear estimate. You can also write to [email protected].
Book Your Roof Cutting Service in Jhunjhunu Today
Ready to start your staircase, lift or renovation work? Let us help you open your roof the right way.
Simple steps:
- Send roof photos on WhatsApp.
- Share the opening size and your location.
- Get a clear estimate and schedule.
📞 Call / WhatsApp: 7009679903 ✉️ Email: [email protected] 🌐 Website: https://corecuttingindia.com/ 🧮 Rate Calculator: Rate-calculator
Conclusion
A professional roof cutting service in Jhunjhunu gives you accuracy, safety and speed, whether you are building a staircase, installing a lift or renovating a heritage-style home. Diamond cutting keeps your structure protected, your edges clean and your project on track. Call or WhatsApp 7009679903 today and get a clear, fair quote from Core Cutting India.
