Picture this: it's Saturday morning, and the core cutting crew arrives at ten. It's now half past eight. What would you do with those ninety minutes?
If your answer is "scramble," this guide is for you. Instead of a long list of rules, we'll take you on a room-by-room walkthrough of a typical home. For each space, you'll see what to move, what to cover, what to check and what to tell the crew. By the end, you'll have a plan that works whether you have a weekend or just a few hours.
A quick note on scope: this is about preparing your site. For the reasons behind power, water and safety requirements, see our explainer on core cutting requirements. For the overall renovation schedule, see our interior renovation checklist.
Renovating your home? Let's get the cutting day sorted. 📞 Call: 7009679903 | 💬 WhatsApp: Send your room photos | ✉️ info@corecuttingindia.com
Start Here: The Ten-Minute Home Walk
Before touching anything, walk through your home with your phone and a roll of masking tape. In each room where a hole is planned:
- Stand at the spot and decide the exact centre
- Mark it with tape and write the diameter on it
- Check the other side of the wall
- Take a photo from two angles
- Note the nearest power point and water tap
Send the photos to your contractor. This ten-minute walk is the single most useful thing you can do, because it turns a vague "somewhere on this wall" into a precise instruction.
For background on the method itself, see our core cutting service page.
Room 1: The Living Room (Usually the AC Hole)
The living room is where most homes need a pipe hole for a split AC. It's also where your best furniture lives.
Prepare
- Move sofas, TV units and showpieces at least a few feet from the wall
- Take down curtains, wall art and clocks nearby
- Cover the floor with plastic sheets or old bedsheets
- Cover electronics you can't move
Check
- Is the planned hole high enough to sit above furniture and below any false ceiling line?
- Will the AC pipe slope slightly downward and outward so water drains away?
- What does the outside wall look like at this spot? Is there a balcony, a window or a neighbour's wall?
Tell the crew
- The height of the hole from the floor
- Whether the wall is brick, RCC or unknown
- Which side the outdoor unit will sit on
Room 2: The Kitchen (Chimney, Exhaust and Drain)
Kitchens are busy and full of fixtures, so they need extra care. For chimney and exhaust details in Jalandhar kitchens, our guides on chimney hole cutting and exhaust fan hole cutting are good references.
Prepare
- Empty the shelves and counters near the wall
- Cover the hob, platform and cabinets with sheets
- Switch off and, if possible, disconnect gas appliances near the work area
- Cover food, utensils and anything stored nearby
Check
- Is the chimney position based on the final hob location?
- Is the duct route short and straight, since bends reduce suction?
- Will the hole clear tiles, cabinets and wall units?
Tell the crew
- Where the chimney or exhaust will connect
- Whether tiles are already fixed
- Any known pipes or wiring behind the wall
Room 3: The Bathroom (Exhaust, Geyser Pipe, Drain)
Wet rooms mix water, electricity and tiles, which means more to protect.
Prepare
- Remove towels, toiletries and loose fittings
- Cover the sanitaryware and floor
- Switch off the geyser and nearby electrical points if asked
- Keep the floor dry and non-slippery for the crew
Check
- Is the exhaust hole placed relative to the final tile layout?
- If a floor or slab opening is needed, does it match the planned drain level once screed and tiles are added?
- Will waterproofing be done after cutting? It should be
Tell the crew
- Whether a floor drain or geyser pipe is planned
- Whether the room is above or below another living space
Room 4: Bedrooms (AC, Cable and Conduit Holes)
Bedrooms usually need fewer holes but contain softer, more delicate items.
Prepare
- Strip beds or cover them completely
- Cover wardrobes and dressing tables
- Move rugs and clothes away
- Keep bedding and soft furnishings in another room
Check
- Does the AC hole line up with the intended wall and headboard position?
- Is the outdoor unit reachable from the outside wall or balcony?
Tell the crew
- Whether the room is occupied by a child, an elderly person or someone with breathing problems
Room 5: Balcony and Terrace (Drains, Pipes and Outdoor Lines)
Outdoor holes seem simple but have their own risks.
Prepare
- Clear plants, pots and furniture
- Cover or remove anything under the opening, especially on lower floors
- Check access for the ladder or scaffold
Check
- Where will slurry run? On upper floors, it can stain the building's facade or a neighbour's wall below
- Does the hole need sealing against rain and pests afterwards?
Tell the crew
- Floor level and whether there's a lift
- Any society rules for outer-wall work
Room 6: Staircase, Passage and Entry (The Route In)
The crew also needs a clear path, and this is the area most people forget.
- Clear shoes, bicycles, pots and stored items from the route
- Check stair lighting
- Keep the entrance free for loading and unloading
- If you live in an apartment, inform the security desk and lift operator
If the passage is narrow or there's no lift, tell the contractor in advance so they can plan how to bring equipment up.
Protect the People, Not Just the Furniture
Renovation preparation is about family as much as property.
Children
Keep them in another room with an adult. Drilling noise, water and equipment are not safe or comfortable for young children.
Elderly family members
Noise and dust can be tiring, and slippery floors are a hazard. Arrange a quiet space elsewhere in the house, or consider visiting relatives for a few hours.
Pets
Animals can get stressed by drilling noise and may wander into wet or dusty areas. Keep them away or boarded for the day.
Work-from-home
Plan meetings around the schedule. Core drilling is loud, so take important calls elsewhere.
Anyone with breathing problems
Wet cutting reduces airborne dust, but it doesn't eliminate it. Keep them well away from the work zone and ensure ventilation.
The Utility Check: Power and Water
Even in a well-prepared home, these two make or break the day. Test them the evening before.
- Power: Is there a working socket near each cutting spot? Is the wiring sound? Are power cuts common in your area?
- Water: Is the tap running? Is the overhead tank full? Do you have a bucket as backup?
For a practical rundown, see our guide on what to arrange before core cutting.
Hidden Surprises: Know Your Walls
Walls hide things. Before the crew arrives, think about what could be inside.
- Electrical conduits from switchboards
- Water pipes from bathrooms and kitchens
- Reinforcement steel
- Old repairs
If you have drawings, share them. If you don't, ask the contractor how they check before drilling. Beams and columns need an engineer's approval; see our note on beam cutting. And for concrete-specific questions, what you need before concrete core cutting goes deeper.
If You Only Have Ninety Minutes: The Emergency Plan
Back to our Saturday morning. Here's what to do with limited time, in order.
- Mark and photograph each hole position (10 minutes)
- Check the other side of each wall (5 minutes)
- Test power and water (5 minutes)
- Clear the route from the door to the work area (10 minutes)
- Move furniture away from each wall (20 minutes)
- Cover floors and fixtures (20 minutes)
- Arrange people and pets (10 minutes)
- Call the contractor to confirm arrival and share any final details (10 minutes)
It won't be perfect, but it will be far better than turning up unprepared.
After the Cutting: Don't Skip the Finish
When the crew is done, walk through again.
- Check each hole's position, diameter and edge
- Look for correct slope on AC and drain openings
- Confirm that debris, cores and slurry are cleared
- Photograph every opening for your plumber, electrician and AC installer
- Ask for sleeves and sealing where needed, especially for outside walls and wet areas
An opening isn't truly finished until it's sleeved and sealed, so plan for this before painting and cladding.
What Will It Cost?
Pricing depends on hole diameter, wall thickness, material, height, access, number of holes and your city. Booking all holes in one visit is usually more economical than separate trips.
Use the Core Cutting Rate Calculator for a starting estimate. Our platform's general guide suggests roughly ₹150 to ₹800 per hole, but larger or more complex jobs can exceed that. Confirm the final figure on a call or WhatsApp, and ask what the quote includes.
Local Note for Punjab Homeowners
Punjab homes vary widely, from independent kothis with thick, repaired brick walls to modern builder floors and apartments. In older houses, tell the crew about past extensions, because walls added at different times can behave differently. In dense areas of cities like Ludhiana, Amritsar and Jalandhar, narrow lanes and limited parking can affect how equipment arrives, and many buildings have no lift. Mention your locality, floor and access when you book.
To compare contractors, ratings and reviews near you, see our Punjab core cutting service page. Outside Punjab? Choose your own city from the homepage, since local conditions and rates differ.
Frequently Asked Questions
How do I prepare my home for core cutting?
Mark and photograph each hole position, check the other side of the wall, move furniture and cover floors, arrange power and water, clear the access route and keep family and pets away from the work area.
How much furniture should I move?
Move furniture at least a few feet from the wall, cover what can't be moved, and take down curtains and wall hangings nearby.
Should I be at home during core cutting?
Yes, or have a trusted adult present, to approve hole positions, answer the crew's questions and inspect the finished work.
Is core cutting safe for children and pets?
Keep them away from the work area. The noise, water and equipment aren't suitable for young children or animals.
How much does core cutting cost for a home?
It depends on diameter, thickness, material, access and city. Our general range is about ₹150 to ₹800 per hole. Use the Rate Calculator and confirm with your contractor.
Can core cutting be done in a home that's still occupied?
Yes. Covering floors, moving furniture and controlling slurry keeps the mess manageable.
How do I book core cutting for my home?
Call or WhatsApp 7009679903 with your city, number of holes, wall type, sizes and photos for guidance and a quote.
Ready for Cutting Day? We'll Help You Prepare
Send us photos of your rooms and planned holes, and we'll tell you exactly what to prepare and connect you with a verified contractor.
📞 Call or 💬 WhatsApp: 7009679903
✉️ Email: info@corecuttingindia.com 🌐 Website: corecuttingindia.com 🧮 Instant estimate: Rate Calculator