Walk through Pandav Nagar and you will see how every inch of space is used. Houses rise four or five floors high. Lanes are narrow. Shops sit below homes, and neighbours are only a wall away.
So when you need to open your roof for a staircase, a lift or a skylight, you cannot afford a rough job. You need a roof cutting service in Pandav Nagar that works with care, keeps the building steady and finishes without a big fight with the neighbours.
Core Cutting India cuts RCC roofs and slabs with diamond tools. The blade follows your marked line, the vibration stays low and water keeps the dust down. What you get is a neat opening that is ready for the next stage of construction.
Call or WhatsApp 7009679903 and send us a photo of your roof.
Quick Reference Box
- Service: Roof, slab and wall cutting using diamond machines
- Location: Pandav Nagar and nearby East Delhi areas
- Typical jobs: Terrace stairs, lift shafts, skylights, ducts, slab repairs
- Starting price: About ₹80 to ₹200 per running foot (varies by site)
- Typical time: A few hours to a day for small openings
- Contact: 7009679903 (call / WhatsApp)
- Price idea in a minute: Rate Calculator
Is Your Roof Ready to Be Cut? Start Here
Many people call us with a simple question: "Can my roof be cut safely?" The short answer is usually yes, but a few things need checking first.
Ask yourself these questions
- What is the opening for? A stair, lift, skylight, duct or repair?
- Is the slab a load-bearing part of the building? Slabs often support walls or floors above.
- How old is the building? Older structures need extra care.
- How many floors are above? More floors mean more load to manage.
- Is there a beam nearby? Cutting close to beams needs special attention.
If you are unsure about even one of these, do not worry. Our technician will check it during the site visit, and we can coordinate with your engineer or architect.
Why Roof Cutting in Pandav Nagar Is Not a Routine Job
Pandav Nagar lies in East Delhi, close to Mayur Vihar, Ganesh Nagar, Laxmi Nagar, Patparganj and Preet Vihar. It is a densely built, lively neighbourhood. This creates a few special challenges:
- Narrow lanes. Bringing machines and carrying out debris takes planning.
- Tall, closely packed buildings. One shaking wall can bother three families.
- Many builder floors. The structure above may be carrying heavy loads.
- Shops and homes together. Noise and dust must be handled with respect.
- Water and power limits. We carry what we need, but good coordination helps.
Careful cutting solves most of these problems. That is why we work with measured planning rather than rushed demolition.
Our Roof Cutting Services in Pandav Nagar
1. Terrace Stair Opening
We make a clean opening in the roof for a new staircase to the terrace or an upper floor.
2. Lift Shaft Cutting
Many builder floor owners are adding lifts. We cut vertical shafts as per your lift drawing.
3. Skylight and Ventilation Cutting
Bring light and air into dark kitchens, stairwells and storerooms.
4. Duct and Chimney Openings
Perfect for small factories, kitchens, tailoring units and workshops.
5. Slab Repair Cutting
We remove only the damaged portion of the slab, keeping your repair budget low.
6. Wall Opening Cutting
We cut walls for new doors, windows and passages, too.
7. Core Drilling Add-On
For small round holes, take a look at our nearby area pages: Geeta Colony, Okhla and Badarpur.
Real Situations We Often See in East Delhi
Case 1: The growing family. A family on the top floor wants a private staircase to the terrace. We cut a neat opening, and the family fits steel stairs within days.
Case 2: The small garment unit. A workshop owner needs better ventilation for stitching machines. We cut an exhaust opening above the work area.
Case 3: The builder floor lift. A landlord plans to add a lift to attract better tenants. We cut a straight shaft according to the drawing.
Case 4: The leaking corner. A section of the roof has been seeping for years. We remove only that damaged piece, and it is rebuilt.
Case 5: The shop with a storage hatch. A shopkeeper needs a hatch to move stock between floors. We cut a small opening with clean edges.
Technology and Equipment
We choose equipment based on the slab and the site.
| Tool |
Where It Helps |
| Wall saw on track |
Long, straight cuts and large openings |
| Ring saw |
Narrow, indoor spaces |
| Wire saw |
Thick or difficult sections |
| Core drill |
Round holes and corner relief |
| Water system |
Dust control and blade cooling |
Why this matters: Better tools mean cleaner edges, lower noise and less vibration. You save time on finishing and avoid damage.
Diamond Cutting vs Breaking: A Clear Comparison
| Factor |
Diamond Cutting |
Breaker / Hammer |
| Accuracy |
High |
Low |
| Vibration |
Low |
Very high |
| Dust |
Controlled |
Heavy |
| Risk to neighbours |
Low |
High |
| Finishing effort |
Less |
More |
| Safety control |
Better |
Poor |
In a closely packed area like Pandav Nagar, the difference is huge.
How We Work: The Pandav Nagar Process
1. Call or WhatsApp. Tell us the area, the purpose and the size of the opening.
2. Quick review. Photos help us give you a first idea of method and price.
3. Site visit. We check slab thickness, beams, access and other conditions.
4. Final quote. You get a clear price and time estimate.
5. Cut-line marking. We draw the lines, and you approve them.
6. Preparation. Floors are covered, water is arranged and props are placed if required.
7. Cutting. The slab is cut in neat sections.
8. Safe removal. Cut pieces are lowered with control.
9. Cleaning. We remove slurry and loose material.
10. Handover. You get a clean opening ready for stairs, lift or finishing.
Safety Is Built Into Every Step
- We study slab and beam layout before cutting.
- Temporary supports are installed where needed.
- Nobody is allowed under the work zone.
- Our team uses helmets, gloves, eye and ear protection.
- Electrical and water connections are kept separate.
- Heavy pieces are cut into smaller parts before lowering.
- Furniture and floors are covered.
Please note: If your plan changes a column, a major beam or a load-bearing wall, take a structural engineer's advice first. We are happy to work from their drawing.
Roof Cutting Cost in Pandav Nagar
Rates are not the same for every building. Here is what shapes the final quote:
- Thickness of the slab
- Amount of steel
- Total length of cut lines
- Floor level and ease of access
- Cutting method
- Debris removal
- Urgency of the work
Indicative Price Table
| Service |
Approximate Starting Range |
| RCC roof and slab cutting |
₹80 to ₹200 per running foot |
| Wall cutting |
₹60 to ₹150 per running foot |
| Core drilling |
₹300 to ₹1,500 per hole (based on size and depth) |
| Small jobs |
Minimum charge may apply |
These rates are only a guide. The final price is confirmed after a site check.
Cost Examples to Help You Plan
- Small duct opening: Short cut length, usually closer to the minimum charge.
- Staircase opening: Medium cut length, priced by running foot.
- Lift shaft: Longer cut lines and thicker slabs, so higher cost.
- Slab repair: Depends on the damaged area and access.
Get a quick estimate with our Rate Calculator, then WhatsApp us for the exact quote.
How to Save Money
- Share clear photos and measurements.
- Book roof, wall and core work together.
- Keep the access path free.
- Plan ahead instead of calling for urgent slots.
Do's and Don'ts Before Roof Cutting
Do
- Take an engineer's opinion for structural changes.
- Inform your neighbours.
- Clear furniture and valuables from the area below.
- Keep water and power ready.
- Approve cut lines before work begins.
Don't
- Don't start breaking by hand "just to begin".
- Don't hire without a site check.
- Don't choose only the cheapest quote.
- Don't allow people to stand under the work zone.
- Don't change the opening size after cutting starts.
Where We Serve: Pandav Nagar and Nearby Places
We provide roof cutting in Pandav Nagar and in nearby East and Central-East Delhi:
- Pandav Nagar and Kalyanpuri
- Mayur Vihar Phase 1, 2 and 3
- Ganesh Nagar and Laxmi Nagar
- Patparganj and IP Extension
- Preet Vihar and Anand Vihar
- Mandawali and Trilokpuri
- Geeta Colony: see local page
- Okhla: see local page
- Badarpur: see local page
Other Cities We Cover
Besides Delhi, we offer concrete cutting and core cutting in Noida, Greater Noida, Ghaziabad, Faridabad, Gurugram, Chandigarh, Ludhiana and Jaipur. Share your location, and we will let you know if we can reach you.
Why Customers Choose Core Cutting India
- Plain, clear pricing
- Site-based planning
- Modern diamond equipment
- Trained, careful operators
- Low dust and low vibration working style
- Respect for neighbours and property
- Fast response on phone and WhatsApp
Frequently Asked Questions (FAQs)
1. What is the cost of roof cutting service in Pandav Nagar?
Roof cutting in Pandav Nagar generally starts from about ₹80 to ₹200 per running foot. The exact price depends on slab thickness, steel, access and the cutting method. You can use our online Rate Calculator or WhatsApp us for a quote.
2. Is roof cutting safe in a multi-storey building?
Yes, when it is properly planned. Diamond cutting causes much less vibration than breaking. We check the slab, use supports where needed and suggest engineer advice for major structural changes.
3. How long does it take to cut a roof for a staircase?
A staircase opening usually takes a few hours to one day, depending on slab thickness and access. We give a clear time estimate after the site visit.
4. Will roof cutting disturb my neighbours?
It will cause some machine noise, but much less than hammering. Low vibration and water-cooled cutting reduce disturbance and dust.
5. Do you work in areas near Pandav Nagar like Mayur Vihar and Laxmi Nagar?
Yes. We serve Mayur Vihar, Laxmi Nagar, Ganesh Nagar, Patparganj, Preet Vihar and other nearby localities.
6. Can you cut a roof for a lift in a builder floor?
Yes. We cut lift shaft openings as per your lift supplier's drawing. Please share the drawing and the slab details for an accurate quote.
7. How do I book your roof cutting service in Pandav Nagar?
Call or WhatsApp 7009679903, send photos and the opening size, and we will arrange a visit. You can also email [email protected].
8. Do you provide services outside Delhi?
Yes. We work in Noida, Ghaziabad, Faridabad, Gurugram, Chandigarh, Ludhiana, Jaipur and other cities on request.
Conclusion: Get Roof Cutting Service in Pandav Nagar the Right Way
A roof opening should be planned once and done right. In a crowded, closely built area like Pandav Nagar, that means working with accuracy, low vibration and good communication.
With Core Cutting India, you get a team that checks first, cuts cleanly and gives you a fair price. If you are looking for a trusted roof cutting service in Pandav Nagar, we are ready to help you with stairs, lifts, skylights, ducts or slab repairs.
Contact Us Now
Send a photo of your roof on WhatsApp today and get a clear, no-pressure quote for roof cutting in Pandav Nagar.
