Want to add a staircase, a lift or a skylight in Junagadh, but your lane is narrow and your building is not new? You are not alone. Our roof cutting service in Junagadh is designed for exactly these conditions. Core Cutting India uses compact diamond cutting machines that remove only the marked part of your slab, with low vibration, controlled dust and neat edges, even in tight spaces.
📞 Call or WhatsApp: 7009679903 ✉️ Email: [email protected] 🧮 Get your estimate: Rate Calculator
Roof Cutting
Roof cutting is the controlled cutting of a concrete roof or slab with a diamond blade or wire saw to make an opening. It is used for staircases, lift shafts, skylights, ducts, pipes and slab removal. It causes far less shock than breaking with hammers.
Junagadh's Building Landscape: Why Careful Cutting Matters
Junagadh is one of Gujarat's most historic cities. It lies at the foot of Girnar, with Uparkot Fort, Sakkar Baug and the Nawabi-era buildings giving the old city its character. It is also the gateway to Gir forest and Somnath, and a base for pilgrims who visit during Mahashivratri and the Girnar parikrama.
This brings a mix of building situations:
- Old city homes and shops in narrow lanes, often with years of repairs and additions.
- Newer houses and apartments in expanding areas around Junagadh.
- Hotels and guest houses serving pilgrims and Gir visitors.
- Educational and agricultural institutions, including the university area, adding lifts and wings.
- Hospitals and clinics upgrading facilities.
- Agro and processing units handling groundnut and kesar mango produce.
In older lanes and busy tourist areas, heavy breaking is risky and disruptive. Compact diamond equipment is far better suited.
Our Roof Cutting Services in Junagadh
Terrace Staircase Opening
Add a neat staircase for terrace use, storage or a rooftop room.
Lift and Elevator Shaft Cutting
Accurate, square openings for lifts in homes, hotels, hospitals and offices.
Skylights and Light Wells
Bring daylight into dark rooms. This helps especially in older, closed layouts.
Pipe, Duct and Cable Passages
Neat openings for plumbing, cooling, drainage and cables.
Slab Section Removal
Safe cutting and removal of weak, damaged or unwanted slab portions.
Core Drilling
Round holes of exact size for pipes and anchors.
Wire Saw Cutting
For thick slabs and large beams, or where a bigger machine cannot be placed.
Need wall cutting too? See our Wall Cutting Service in Navsari, Wall Cutting Service in Jamnagar and Wall Cutting Service in Valsad.
Narrow Lanes and Hilly Roads: How We Manage Access
Many Junagadh sites are not easy to reach. Here is how we handle it:
- Share the access details. Tell us the lane width, steps and floor level.
- We bring suitable equipment. Compact saws and core drills fit tight spaces.
- Carry in parts, not big machines. Equipment can be taken up in sections when needed.
- Plan debris removal. Cut blocks are sized so they can be carried or lowered safely.
- Use covers and barricades. Neighbouring homes and shops stay protected.
- Respect timings. We avoid peak hours and festival crowds where possible.
Our Process: 8 Simple Steps
- Enquiry. Send photos, measurements and purpose on 7009679903.
- Quote. Get a clear price, or try the rate calculator.
- Site inspection. We check slab thickness, steel, beams and access.
- Marking. Cut lines are drawn and approved by you.
- Safety setup. Supports, barricades and water supply are arranged.
- Cutting. Diamond tools cut through concrete and steel.
- Removal. Blocks are lifted or lowered safely.
- Clean-up. We leave the area tidy.
Technology We Use
| Machine |
Best For |
| Slab saw |
Straight cuts on roofs and floors |
| Wall saw |
Deep or edge cuts |
| Diamond wire saw |
Thick slabs and tight or heavy jobs |
| Core drill |
Round holes |
| Water cooling system |
Dust control and blade life |
Diamond tools grind through concrete instead of pounding it. That keeps old walls and beams steadier.
Safety Standards
- Structural check before cutting
- Props where needed
- Helmets, gloves, goggles and ear protection
- Barricaded work zone
- Pipes and wires traced beforehand
- Water control to protect lower floors
Heritage-style and old buildings: If your building is old, protected or visibly cracked, check whether any approval is needed and get a structural engineer's opinion before cutting. We are happy to work with your engineer or architect.
Roof Cutting Cost in Junagadh
Here is a simple guide to plan your budget.
| Type of Work |
Indicative Starting Price |
| Small opening in 4–6 inch slab |
From around ₹8,000 |
| Staircase or medium opening |
About ₹15,000 to ₹30,000 |
| Cutting per running foot |
Around ₹80 to ₹200 |
| Core drilling |
By diameter and depth |
| Large or commercial slab work |
Custom quote |
Estimates only. The final price depends on site conditions.
What Affects Your Price?
- Slab thickness
- Steel density and condition
- Total cutting length
- Floor level and ease of access (narrow lanes and stairs can add effort)
- Debris removal
- Distance to site
Tips to Save Money
- Share accurate measurements and photos.
- Describe access clearly.
- Combine all cuts in one visit.
- Arrange water and power.
Use the Rate Calculator or WhatsApp 7009679903 for your estimate.
Benefits of Choosing Core Cutting India
- ✅ Precise cuts as per your plan
- ✅ Low vibration
- ✅ Quick completion
- ✅ Controlled dust
- ✅ Lower repair cost
- ✅ Works in narrow lanes and upper floors
- ✅ Honest pricing
- ✅ Fast response on call and WhatsApp
Diamond Cutting vs Hammer Breaking
| Factor |
Diamond Cutting |
Hammer Breaking |
| Vibration |
Low |
High |
| Noise |
Controlled |
Very loud |
| Edge quality |
Smooth |
Rough |
| Crack risk |
Low |
High |
| Dust |
Low |
Heavy |
| Repair cost |
Low |
High |
Use Cases in and Around Junagadh
- Old city homes: terrace stairs, skylights and shafts
- New houses and apartments: lift openings and service ducts
- Hotels and guest houses: lifts and skylights for pilgrims and Gir visitors
- Shops and showrooms: mezzanine floors
- Hospitals and clinics: quiet, dust-controlled cutting
- Schools, colleges and hostels: stair and lift additions
- Agro and processing units: pipe and equipment openings
- Renovation projects: safe removal of weak slab sections
Areas We Serve Near Junagadh
We provide roof cutting service in Junagadh and nearby areas, including:
- Junagadh city
- Keshod
- Visavadar
- Manavadar
- Mendarda
- Bhesan
- Vanthali
- Maliya Hatina
- Mangrol
- Veraval
- Somnath
- Sasan Gir
- Jetpur
- Rajkot
- Porbandar
We also work in other cities across Gujarat and India. See our services in Navsari, Jamnagar and Valsad, or visit corecuttingindia.com.
Quick Checklist Before You Book
- Decide the purpose of the opening.
- Measure length and width.
- Note slab thickness if known.
- Check for cracks, dampness or rust.
- Take clear photos, including the access route.
- Confirm water and power.
- Ask for a written quote.
- Involve your engineer for structural changes.
Why Junagadh Customers Trust Us
Junagadh respects heritage, hard work and straight talk, and we try to bring all three to every job. We explain the plan in simple words, give a clear price and handle your property with care. If a cut looks risky, we tell you before starting. If there is a better method, we suggest it. That honesty is why customers call us again.
FAQs: Roof Cutting Service in Junagadh
1. How much does roof cutting service in Junagadh cost?
Roof cutting in Junagadh usually starts from around ₹8,000 for small openings. Larger jobs depend on slab thickness, steel, access and cutting length. Use our rate calculator or call 7009679903.
2. Is roof cutting safe for old buildings in Junagadh?
It can be, when done with diamond machines, supports and an inspection. For old or cracked buildings, get a structural engineer's opinion first.
3. How long does roof cutting take?
Small and medium openings usually take about a day. Thick slabs, lift shafts or large openings may take two to three days.
4. Can you work in narrow lanes?
Yes. We use compact equipment and plan access and debris removal in advance.
5. Do you cut slabs with steel bars?
Yes. Diamond blades and wire saws cut both concrete and steel reinforcement.
6. Is roof cutting noisy or dusty?
It is far quieter and cleaner than hammer work. Water cooling keeps dust low.
7. Do you serve areas near Junagadh?
Yes. We cover Keshod, Visavadar, Manavadar, Mendarda, Veraval, Somnath, Sasan Gir, Jetpur, Rajkot, Porbandar and more.
8. How do I book roof cutting in Junagadh?
Call or WhatsApp 7009679903 with photos and measurements. We will send a quote and arrange a visit.
Book Your Roof Cutting Service in Junagadh Today
Choose a team that cuts carefully, works safely and prices fairly.
📞 Call Now: 7009679903 💬 WhatsApp: Message us ✉️ Email: [email protected] 🧮 Instant Estimate: Rate Calculator 🌐 Website: corecuttingindia.com
Conclusion
A trustworthy roof cutting service in Junagadh should handle old lanes, historic buildings and modern projects with equal care. Diamond cutting gives you accurate openings, low vibration and lower repair costs, whether you need a staircase, a lift shaft, a skylight or a slab section removed. Core Cutting India brings skilled operators, compact modern machines and clear rates to Junagadh, Keshod, Visavadar, Veraval, Jetpur and nearby areas.
Ready to start? Call or WhatsApp 7009679903 today for your roof cutting quote.
